Industrial Electric Furnace

Heat Area - 100m2
Dimension(W*H*D) - 450*975*782mm
Weight - 70kg
Air inlet pipe - 50mm
Air outlet pipe - 80mm
Auto-burning Time - 13h-27h
Fuel Consumption - 0.8-1.8kg/h
Efficiency - 90%
Hopper Capacity - 20kg
Electronic consumption - 100-400w/h
Rating voltage - 230v

The most powerful commercial condensing boiler in the world, the E-Compact Twist is available in a wide range of outputs of 25kW up to 150kW, and is ideal for business owners who are looking to run a more energy-efficient business. The only condensing pellet boiler in the world with a single heat exchanger, the E-Compact Twist condensing boiler can achieve efficiencies of up to 103%.

Steam Boiler Supply

Reboiler

Bioreactor

Electric furnace, heating chamber with electricity as the heat source for achieving very high temperatures to melt and alloy metals and refractories. The electricity has no electrochemical effect on the metal but simply heats it.

Electric furnaces produce roughly two-fifths of the steel made in the united states. They are used by specialty steelmakers to produce almost all the stainless steels, electrical steels, tool steels, and special alloys required by the chemical, automotive, aircraft, machine-tool, transportation, and food-processing industries. Electric furnaces also are employed, exclusively, by mini-mills, small plants using scrap charges to produce reinforcing bars, merchant bars (e.G., angles and channels), and structural sections.

The german-born british inventor sir william siemens first demonstrated the arc furnace in 1879 at the paris exposition by melting iron in crucibles. In this furnace, horizontally placed carbon electrodes produced an electric arc above the container of metal. The first commercial arc furnace in the united states was installed in 1906; it had a capacity of four tons and was equipped with two electrodes. Modern furnaces range in heat size from a few tons up to 400 tons, and the arcs strike directly into the metal bath from vertically positioned, graphite electrodes. Although the three-electrode, three-phase, alternating-current furnace is in general use, single-electrode, direct-current furnaces have been installed more recently.

It is mainly used for high temperature firing of thick film circuit, precision resistance, chip electronic components, LTCC, glass glaze, ceramic filter and annealing of photovoltaic thin film glass.
Rated temperature:RT-850
Heating elements:Heating board
Quantity of heating zone: 7 zones
Temperature uniformity:
Belt width:350mm
Belt material:Cr20Ni80
Cooling mode:Fan cooling