1. Miniature Size Designed in the low profile at mounting height 5.7mm. (SMT mounting straight type) (For DIP type, the mounting height is to 5.7mm to the straight and 2.5mm at the right angle)
2. Multi-contact The double row type achieves the multi-contact up to 40 contacts, and secures 30% higher density in the mounting area, compared with the single row type.
This connector is designed to be compact and unusually thin. It measures only 8.1mm (.319") high after mounting and is just 3.8mm (.150") wide. Highly reliable contact The contact has long dimples near the center that ensure continuity of low voltage and low current circuits at all times, even under conditions of vibration and abusive prying.
In , connectors used in home appliances need to pass Glow Wire testing. KK 508 Connector System has passed VDE Glow Wire testing, making it suitable for home appliances.
STC offers a variety of 1.5 Pitch connectors with different models and in various dimensions, with top or side entry configurations that might suit your specific needs. Top entry configuration consumes a minimum of 3.5mm x 5.6 mm mounting height and depth, respectively; while the side entry configuration consumes a minimum of 3.7 mm x 7.1 mm mounting height and depth, respectively.
No alloy was used in fastening the wires to the board but the use of a crimping method, which makes it more flexible and mechanically stronger. The crimps are well-engineered to be air-tight, preventing oxygen and moisture from reaching the metals, and causing corrosion. Thus, the connector can be easily removed from the head without holding the wires.
High Durability with Terminal Protection Assurance (TPA) Technology Utilizing Terminal Protection Assurance(TPA) Technology, STC manufactures Molex Mini-Fit 4.2mm with enhancements in its connector housing and contact design to help prevent connection failure. TPA designs offer overlooked connection solutions by providing locking redundancy. This promotes a durable connector design in which terminals can be inserted properly without degradation from unnecessarily exhausting them with thousands of insertions. Equipped with Reduced Mating Force (RMF) Solutions Like Molex Micro-Fit, the MIni-Fit Jr is equipped with RMF solutions for lower friction solution between the contacts of the device and the socket, making insertion and removal of the device easier, while at the same time eliminating the need for complex mechanisms such as in ZIF sockets. Designed for Blind-Mating Applications
This is offered in different models and in various dimensions, with top or side entry configurations which might suit your specific needs. Over-molded Shell Feature Designed for High Density, High-Speed Harness Manufactured with higher infill housing, the 2.0mm connector is suitable for high-density and crowded applications, withstanding higher strain and mechanical stress.
Compactness The mounting height of the connector is just about 16.5mm after connecting it to the circuit. This feature makes it the most compact connector of all. High current carrying capacity and high withstanding voltage The connector can carry current up to 10 A through it. This gush of current is more than sufficient for any electronic device. This connector has a high voltage withstanding capacity of 1500 V AC per minute. Locking mechanism
1. Peak temperature: 250 max. 2. Heating area: 230 min. for less than 60 seconds 3. Preheating area : 170 to 190 for 60 to 120 seconds
Signal application KK 254 connectors are ideal for use in industries such as automotive, medical, and consumer, delivering up to 5.0A and 250V per circuit in a 2.54mm centerline pitch. Dual-cantilever terminals offer a square-post contact area that interfaces with the male pin header through a spring-like contact. Available in 22 to 30 AWG wire, an optional box-style dual-cantilevered terminal is optimal for high-vibration applications.
