Aixun Iheater Preheating Desoldering Station

SUNSHINE SS-T12A Phone X upper / lower motherboard pre-heating station adopt special heating design and precise temperature control capability, which will locate accurately locate the needed heating part. SS-T12A has dual bayonet design to make phone X motherboard stable. SUNSHINE SS-T12A has EU, AU, and US plug, 110V or 220V for your choice. Using high purity copper to guarantee heat transfer, which is not easy for deformed, durable and anti-wear. Features 1. Adopting 185-degree layered process to remove the IP-X motherboard, not only from our fine analysis of IP-X solder paste ,but depends on the special heating design and precise temperature control of SS-T12A. 2. SS-T12A only heats the area that the IP-X board needs to be removed to prevent improper heating. 3. Dual bayonet design, make sure the IP-X motherboard is stable on the stage. 4. High purity copper is used as a film to ensure uniform heat transfer and heat.

200W JC AIXUN T3A smart soldering station with 936 T12 T245 handles and iron tips for cellphone motherboard BGA CPU IC welding repair. Intelligent AIXUN T3A electric soldering iron station supports three soldering handles and different kinds of iron tips(936/T12/T245 soldering handles), 100-480â?? temperature adjustable, and can be applied to different welding repair needs. Features: 1. Connect to Aixun platform for free software upgrade automatically, unlimited function upgrade. 2. Adopt 200W super power supply, only takes 4 seconds for C245 soldering iron to rise to 380 â??. 3. Intelligent recognition of welding target and environment, intelligent power compensation and automatic protection. 4. 2.4 inch color display, 100-480 â?? temperature adjustable, with real-time dormancy. 5. Support 936, T12, T245 three handles, automatic identification of handle model and working state. 6. Personal habit temperature self memory, three channel temperature fast switching, knob adjustment. 7. The host has a built-in environment temperature sensor to avoid high temperature operation. 8. Automatic record of working time, automatic reminder of fatigue operation. 9. Maximum support of 24 V-8A current output, with DC power supply and burning function. 10. Ultra strong anti-static isolation design meets the industrial ESD standard.

Aixun T3B Intelligent Soldering Station With T210/115 Handle Welding Tips (T210/115 Handle + 3 TIPS) 3 tips High Quality with different shapes included,The worldâ??s first 200W Full Intelligent soldering station. The top 10 leading functions: 1. Connect to Aixun platform for free software upgrade automatically, unlimited function upgrade. 2. Adopt a 200W super power supply, only takes 4 seconds for the soldering iron to rise to 380 â??. 3. Intelligent recognition of welding target and environment, intelligent power compensation and automatic protection. 4. 2.4-inch colour display, 100-480 â?? temperature adjustable, with real-time dormancy. 5. Support T210/115 handles, automatic identification of handle model and working state. 6. Personal habit temperature self memory, three-channel temperature fast switching, knob adjustment. 7. The host has a built-in environment temperature sensor to avoid high-temperature operation. 8. Automatic record of working time, an automatic reminder of fatigue operation. 9. Maximum support of 24 V-8A current output, with DC power supply and burning function. 10. Ultra-strong anti-static isolation design, meet the industrial ESD standard.

Packing list: A gasoline duplicating cutting torch·+ An explosion suppression gasoline tank(no duplicating machine, the userf+s original acetylene duplicating machine can still be used); 10 meters oil-resistant rubber hose·+longer hose optional·¼; 4 cutting nozzles: QZ30-1#- can cut steel sheet 3~10mm thickness·+optional·¼ QZ30-2#- can cut steel sheet 10~20mm thickness·+optional·¼ QZ30-3#- can cut steel sheet 20~30mm thickness·+optional·¼ QZ100-1#- can cut steel sheet 20~40mm thickness·+optional·¼ QZ100-2#- can cut steel sheet 40~60mm thickness·+optional·¼ QZ100-3#- can cut steel sheet 60~100mm thickness·+optional·¼ QZ300-1#- can cut steel sheet 100~150mm thickness QZ300-2#- can cut steel sheet 150~200mm thickness QZ300-3#- can cut steel sheet 200~250mm thickness QZ300-4#- can cut steel sheet 250~300mm thickness A set tip drills; A set o-ring·+spare parts·¼; Instruction; A set certification. Mark: CNC flame cutting machine combustion system reform Existing acetylene or propane CNC cutting machine can be to carry out technological transformation; combustion material feeding system will be changed to gasoline supply system, become gasoline CNC Cutting Machine. Performance Overview Thank you for your identify purchased the TONGTAI gasoline welding & cutting machines by your talents, the products have significant energy-saving effects and excellent cutting performance, itf+s magic laminated cutting, underwater cutting, drilling on the thick plate and other features are no matched by other flame cutting: =+ Easy operation: No electricity, no pressure in gasoline tank, overcome the tedious work before using. =ª Good cutting quality: The cutting slotted smooth, no undercut and burning sink in upside, no nodulation and no hung bits in downside. =ª Small heat-affected zone: Particularly for carbon steel, itf+s cut surface will not appear hardening phenomenon, so greatly reduced processing difficulties of under procedures. =+ It can cut layers, a dozen stacked with the plate, the cutting speed is same with the same thickness of the plate and can cut 10 mm thickness laminated steel which is the product of a magical function, but need to choice bigger a size than the normal cutting nozzle, it is because gasolinef+s weight is four times than acetylene gasf+s. The secondary combustion was generated on the lower surface of the plate when cutting. =+ As long as the bigger preheating flame was choice, this product can smoothly cut the plate even which was very dirty on the surface (rust, paint, concrete, etc.). =- The thick steel sheet can be punched security and fast, the most depth is up to250 mm thickness. =- The combustion tube is not backfire. =ª Can press the igniting torch nozzle on the plate surface and immerse in water, it will not be extinguished. =- Itf+s normal working temperature range is -40 f¦ to 50 f¦. =+ A cutting torch and cutting nozzle with cooling water can cut high temperature steel plate. Weight: 10kg/package Dimensions: length 610mm, width 380mm, high 350mm.

Packing list: A gasoline semi automatic cutting torch· An 10liters explosion suppression gasoline tank(No semi automatic car and track, the userf+s original acetylene semi-automatic roadster can still be used); 10 meters oil-resistant rubber hose·+longer hose 4 cutting nozzles: * can cut steel sheet 3~10mm thickness· * can cut steel sheet 10~20mm thickness· * can cut steel sheet 20~30mm thickness· * can cut steel sheet 20~40mm thickness· * can cut steel sheet 40~60mm thickness· * can cut steel sheet 60~100mm thickness· * 0-1#- can cut steel sheet 100~150mm thickness * 0can cut steel sheet 150~200mm thickness * 0can cut steel sheet 200~250mm thickness * 0-4#- can cut steel sheet 250~300mm thickness A set tip drills; A set o-ring·+spare parts· Instruction; A set certification. Performance Overview Thank you for your identify purchased the TONGTAI gasoline welding & cutting machines by your talents, the products have significant energy-saving effects and excellent cutting performance, itf+s magic laminated cutting, underwater cutting, drilling on the thick plate and other features are no matched by other flame cutting: * Easy operation: No electricity, no pressure in gasoline tank, overcome the tedious work before using. * Good cutting quality: The cutting slotted smooth, no undercut and burning sink in upside, no nodulation and no hung bits in downside. * Small heat-affected zone: Particularly for carbon steel, itf+s cut surface will not appear hardening phenomenon, so greatly reduced processing difficulties of under procedures. * It can cut layers, a dozen stacked with the plate, the cutting speed is same with the same thickness of the plate and can cut 10 mm thickness laminated steel which is the product of a magical function, but need to choice bigger a size than the normal cutting nozzle, it is because gasolinef+s weight is four times than acetylene gasf+s. The secondary combustion was generated on the lower surface of the plate when cutting. * As long as the bigger preheating flame was choice, this product can smoothly cut the plate even which was very dirty on the surface (rust, paint, concrete, etc.). * The thick steel sheet can be punched security and fast, the most depth is up to250 mm thickness. * The combustion tube is not backfire. * Can press the igniting torch nozzle on the plate surface and immerse in water, it will not be extinguished. * Itf+s normal working temperature range is -40 f¦ to 50 f¦. * A cutting torch and cutting nozzle with cooling water can cut high temperature steel plate. Metal welding & cutting revolution Dear customer: If you are using the expensive acetylene gas to cut or weld the metal, here I recommend my company's energy-saving products to you. Patent (Patent No.: 992098149) Through the National Machinery

Soft soldering tin lead solder wire sn63pb37, with rosin cored flux 1.5--2.2%, diameter 0.35--6.0mm available, packed in spool 1kg, 500g, 1lb..... Or tube 20g, 15g....

Tin lead solder wire sn60pb40 With rosin cored flux 1.8-2.2% Diameter 0.35-6.0mm available Packed in spool 1kg, 500g, 1lb, 250g, 200g.... Or tube 20g, 10g... Melting temperature 183-190â?? Density 8.5 Use pure materials, not recycle, good quality

Tin lead solder wire with rosin cored flux 1.8-2.2% Diameter 0.35-6.0 mm Packed in spool 1kg, 500g, 1lb, 250g, 200g... Or tube 20g, 10g... Melting temperature 183-215 Use pure materials, not recycle, good quality for soldering results.

Lead-free solder wire with SGS certificate Diameter:0.35-6.0mm Packed in spool or tube, unit weight 1kg, 500g, 250g, 1Lb.... No clean for general soldering Solid wire, acid cored flux or rosin cored flux 2.0-2.5%