The NCD 1409 Toxicity Chamber consists of a about 1 m3 enclosure. The inside wall is lined with polypropylene to prevent the gaseous mixture from adhering and to make cleaning easier. Forced air extraction is installed in the chamber, and it can be opened or shut using the control panel as needed. A sampling port that is airtight is installed in the chamber. For proper mixing of the gaseous product inside the test chamber, an axial mixing fan is included. This fan is adjustable via the control panel that comes with the equipment.
Features:
The burner must be able to produce a flame that is around 100 mm in height.There is a provision for starting and stopping the burner from outside the chamber. For the purpose of measuring the temperature of the burner's flame, a digital temperature indicator is also installed.
The equipment includes wire mesh of the appropriate size.
have rich experience to provide BSS 7239 Toxicity Test to Aircraft Material BSS 7239 Toxicity Test to Aircraft material BSS 7239: Test method for toxic gas generation by materials on combustion BSS 7239 Toxicity Test to Aircraft material - Brief Gases produced for analysis are generated in a specified, calibrated smoke chamber during standard rate of smoke generation testing (ASTM E 662), in both flaming combustion and non-flaming pyrolytic decomposition test modes BSS 7239 Toxicity Test to Aircraft material- Gases measured The following gases are required to be measured by this test standard CO Carbon monoxide HF Hydrogen Fluoride HCl Hydrogen chloride NOx Nitrogen oxides (Both NO, nitric oxide, and NO2, Nitrogen dioxide, are detected) SO2 Sulfur dioxide HCN Hydrogen cyanide Fire test to aircraft material relative standards FAR 25.853 flammability test to aircraft material Air bus standard ABD 0031 - airbus fire testing flame, smoke and toxicity Boeing Standard BSS 7238 fire testing to smoke density Boeing Standard BSS 7239 fire testing to toxicity ASTM Standard ASTM E 662 fire testing to Smoke Density ASTM Standard ASTM E 162 Surface Flammability of materials
Model Number: L-BATH series Function: For testing small, middle, large sized battery Volume: 30L 1500L Temperature range:-70 180 C Humidity range: 20%RH~98%RH Hazard Level: Designed to meet the safety functions of EUCAR hazard level up to 6. Standards: Battery Test Chambers meet IEC, UL and a variety of other battery test specifications. Equipped with safety functions that protect again fire and bursting of the battery, including a Magnetic lock, pressure relief vent, forced exhaust and fire extinguisher.
Model Number: L-HH series Function: Temperature, High humidity Volume: 100L ~ 1500L Temperature range:-70 ~180 °C Ramp rate: 1 °C/min Humidity range: 20%RH~98%RH Main test points: 85%RH @ 85 °C, 90%RH @ 60 °C
Model Number: L-BT series Function: Temperature, humidity Volume: 40L ~ 64L Temperature range:-70 ~180 °C Ramp rate: 1 °C/min Humidity range: 20%RH~98%RH
Envisys Technologies are Environmental Test Chambers Manufacturers that are designed to simulate a wide range of temperature, relative humidity etc., and conditions without the added cost of expensive add-ons as options. The Environmental Test Chambers come with special features including multi-pane vacuumed glass view window, de-fog heaters, high grade SS interiors & CRCS powder coated panels and more.
Envisys is an ISO 9001-2015 certified manufacturer of climatic chambers in India. We supply custom-built temperature-controlled test chambers, based on the industry's requirements for various applications including building materials, plastics, composites, metals, electronic components, batteries, etc. To withstand product quality in a variety of environmental testing, we supply different configuration of the test chamber, mini environmental chamber, single block walk-in climatic test chamber, and Ess climatic test chamber with temperature ranges from -70 °C to 180 °C. Our climatic chambers are used in Automotive, Coatings, Chemicals, Aerospace, Defence, and Electronics industries for testing specimens under various test environments.
Sand and Dust chamber are designed to test the product resistance under extreme dust conditions. We are the supplier of custom build sand test chamber, JSS 55555, IEC 60529, SAE J575 and JIS 0207 dust models in the automotive & electronics industries
Envisys designed and manufactured battery chambers to test the batteries under the various environmental condition to encounter its lifetime and safety against harmful explosions or ignitions. We are leading supplier of lithium-ion battery test chamber in India
Envisys technology is one of the leading manufacturers of environmental chambers in India. We supply a variety of temperature humidity chambers, based on the industry's requirements for various applications including building materials, plastics, composites, metals, electronic components, batteries, etc. To withstand product quality in a variety of environmental testing, we manufacture a wide range of test chambers, Environmental Test Chambers, Thermal Chambers, Salt Spray Chambers, Dust Chambers, Rain Chambers, Thermal Shock Chambers, Altitude Chambers, Walk-in Chambers, Vibration Interface Chambers, UTM Interface Chambers, Temperature Forcing Systems, Industrial Oven / Dryer, Industrial Chiller & Razor Blade Treatment Chamber in Bangalore, India.