Flammability Chamber
Plastic materials can be categorised according to their capacity to survive combustion using the UL 94 flammability criteria. A plastic material's flammability rating is determined by how it reacts to heat and flame under controlled laboratory settings. The test findings will provide a good indicator of the material's suitability for a certain application in terms of flammability. The size, shape, and intended purpose of the product, as well as elements in the final application such as ease of ignition, burning rate, flame spread, fuel addition, and intensity of burning, will all affect the thermoplastic's behaviour when exposed to heat and flame.
have rich experience to provide BSS 7239 Toxicity Test to Aircraft Material BSS 7239 Toxicity Test to Aircraft material BSS 7239: Test method for toxic gas generation by materials on combustion BSS 7239 Toxicity Test to Aircraft material - Brief Gases produced for analysis are generated in a specified, calibrated smoke chamber during standard rate of smoke generation testing (ASTM E 662), in both flaming combustion and non-flaming pyrolytic decomposition test modes BSS 7239 Toxicity Test to Aircraft material- Gases measured The following gases are required to be measured by this test standard CO Carbon monoxide HF Hydrogen Fluoride HCl Hydrogen chloride NOx Nitrogen oxides (Both NO, nitric oxide, and NO2, Nitrogen dioxide, are detected) SO2 Sulfur dioxide HCN Hydrogen cyanide Fire test to aircraft material relative standards FAR 25.853 flammability test to aircraft material Air bus standard ABD 0031 - airbus fire testing flame, smoke and toxicity Boeing Standard BSS 7238 fire testing to smoke density Boeing Standard BSS 7239 fire testing to toxicity ASTM Standard ASTM E 662 fire testing to Smoke Density ASTM Standard ASTM E 162 Surface Flammability of materials
Application Benchtop temperature chamber can meet certain quality standards and testing specifications ,for example: Daily necessities, cosmetics, electronic components, and medical products .� Most ideal designed for temperature and humidity testing of small samples and specimens used for research, development and quality control.� This dimension are very cute. customer can fit on a personal desk is the most consideration.If you need more models about our test equipment, please reference our chamber-testingï¼?.ï¼?com Feature: Our JOEO Benchtop Temperature Chamber's window is equipped with an anti-sweat electric heater device to prevent water vapor from condensing and water droplets, and high-brightness PL fluorescent lamps keep the interior of the box illuminated;Rectangular multi-layer glass viewing window, which can be used to observe the test items during the test.� With automatic-water supply system, it is convenient to supplement the water supply of the humidification barrel, and it can be recycled and used automatically. High-quality appearance, the body adopts an arc shape, the surface is treated with matte stripes, and the flat non-reaction handle is adopted, which is easy to operate, safe, and reliable. High quality original compressor circulation system adopts the French â??Tecumsehâ??& Germany "Bitzer" brand, which can effectively remove the lubricating oil between the condenser tube and the capillary tube, and the whole series adopts environmentally friendly refrigerants (R23, R404, R507). Double-layer insulation of ess chamber door is tight and airtight, which can effectively isolate internal temperature leakage.� Built-in moving pulley is easy to move and place and has a strong positioning screw to fix the position. Controller has multi-segment program editing and temperature, and humidity can do fast (OUICK) or slope (SLOP) control. Self-developing controller system adopts an imported LCD screen, which can display the measured value, set value, and time at the same time. Announcements: Do not place the sample in the oven heating state, and place the sample in the state of ensuring that the heating is off;� When placing the sample, there should be a certain space around the upper and lower parts to keep the air flow in the box smooth; There is a cooling plate on the heating wire at the bottom of the chamber, and the sample can not be placed on it, so as not to affect the heat flow and lead to heat accumulation; If the sample will have a phase change at high temperature, it must be packed in a tray to avoid contaminating other samples (for example, it will leak oil or change from solid to liquid after heating); Containing flammable and explosive organic volatile solvents or auxiliaries shall not be put into the chamber.
