Use: Single Use Only
Protection standard: Types 5 and 6
Sizes: S, M, L, XL, XXL
Structure: The Disposable Coverall is the connective structure of the cap top and pants. The product is
disposable non-sterile, medical coverall.
Scope of usage: These coveralls are used as a civilian grade disposable coveralls that is designed
for protection against hazardous substances and contamination of both product and
personnel. They are typically used, dependent on the severity of the toxicity and the
conditions, for protection against airborne particles and limited non-toxic splash and
spray.
Certified to
protection level:
EN ISO 12947-2:2016 (Type 5) - Abrasion Resistance (Class 2)
EN ISO 7854:1997, Method B (Type 5) â?? Compression-Folding (Schildknecht)
Flex Cracking Resistance (Class 6)
EN ISO 9073-4+ A1 :1997 (Type 5) â?? Trapezoidal Tear Resistance (Class 1)
EN ISO 13934- 1 :2013; CRE â?? 2 Strip (Type 5) â?? Tensile Strength (Class 1)
EN 863:1995 (Type 5) â?? Puncture Resistance (Class 1)
EN ISO 13935-2:2014 (Type 5) â?? Seam Strength (Class 3)
EN 13034 :2005+ A1 : 2009 (Type 6) Whole Suits Testing (Pass)
EN ISO 17491 -4 :2008 Method A (Type 6) â?? Low-level Spray
Storage condition: Relative humidity < 80%, No corrosive gas, well-ventilated, dry and clean room.
Valid period: 2 years
General Description: Spray/aerosol-penetration resistant, biohazard-protective coverall, for use in EVD patient-isolation units for infection prevention and control against viral penetration. Technical specifications Product name: Coverall type 4B/5B/6B Elasticated hood around face. Elasticated cuffs and ankles. Elasticated sleeves. Taped seams. Zipper with re-sealable flap protecting leakage through seams. Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards. White color with blue tape Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm Lightweight, do not contain rubber/ latex. Antistatic treated on both sides. Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard) Non-sterile Single Use, disposable Size: M-XL Conforms to standards below: European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards. EN 13034:2005+A1 EN 14605 EN ISO 13982-1 EN 1073-2 EN ISO 13688 EN 1149-5 Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by blood borne pathogens using bacteriophage Phi X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard) Performance requirement ISO standards: EN 340 General requirements EN ISO 17491-4: 2008 (supersedes: EN 468 mod. Spray aerosol test) EN 14325 Test methods & performance classification EN ISO 3758 (ISO 3758) Textile care symbols EN ISO 13935-2 Seam strength Certificates CE from notified body ISO13485 Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions : As indicated by supplier Packaging and labelling : Individually packaged in a transparent plastic bag. Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type, coverall performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
Product name: Coverall type 4B/5B/6B Elasticated hood around face. Elasticated cuffs and ankles. Elasticated sleeves. Taped seams. Zipper with re-sealable flap protecting leakage through seams. Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards. White color with blue tape Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm Lightweight, do not contain rubber/ latex. Antistatic treated on both sides. Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard) Non-sterile Single Use, disposable Size: M-XL Conforms to standards below: European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards. EN 13034:2005+A1 EN 14605 EN ISO 13982-1 EN 1073-2 EN ISO 13688 EN 1149-5 Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by bloodâ??borne pathogens using bacteriophage Phiâ??X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard) Performance requirement ISO standards: EN 340 General requirements EN ISO 17491-4: 2008 (supersedes: EN 468 mod. Spray aerosol test) EN 14325 Test methods & performance classification EN ISO 3758 (ISO 3758) Textile care symbols EN ISO 13935-2 Seam strength
Protective Gown Overall (Coverall) CE FDA Certification Material: PP Size: S/M/L/XL, as request Color: Blue, white, yellow, as requested Style: one piece or two piece Sleeve: Long sleeve Collar: ordinary type/ knitted Cuff: with elastic / knitted Application:formedical,surgical,pharmaceutical,laboratorial,industrialsector
Product Name - Protective coveralls / suits category 3 type 5-B / 6-B Product Description - Fabric: 55g / m2 - Fluid resistant Breathable. CE Certificate" Price of product ( USD price or FOB price) - ASK - DEPENDS ON QUANTITY Key Specifications/Special Features - DIN EN 14126 Penetration test with synthetic blood (ISO 11603) Virus resistance (ISO 16604) Resistance to penetration of infectious agents Aerosol resistance (ISO 22611) Resistance to contaminated solid particles (ISO 22612) EN13688: 2013 DIN EN ISO 13982-1: 2011-02 (clothing type 5) - DIN EN 13034: 2009-08 (Equipment type 6 and type PB [6])" Minimum Order Size and Packaging details - MOQ 10000 UNITS
Price: We can only give a quote upon inquiries. Product Origin: Turkey (TR) Key Specifications: Protects Against Liquids with Chemical Concentration Less than 40%, Protects Against Solvents, White 63gr/m Fabric, Laminated Film Covered Microporous, Breathable Feature, Tear, Abrasion and Pilling Resistant, Fully Sits on the Body Thanks to Elastic Waist and Wrist Parts, Antistatic. Standards: EN1149-5:2008, EN ISO 13982-1:2004 A12020 TYP 5-B, EN130342005-A1:2009 TYP 6-B, EN1073-2:2002, EN141262003/AC:2004 Packaging Details: 50 in one package, all individually packed
57 GSM, Laminated and breathable fabric options: 53-56-60 gsm. High Protection Against Liquid and Dust. Size S -XXL, White, EN 14126
Taped Protective coveralls provide protection against hazardous dust. It is favorable for use in many enviroments thanks to its nonwowen type. It is covered with lamination for extra strong protection against liquids. It is suitable for use in cleaning processes, production areas containing cement, metal grinding and polishing, light industrial cleaning and machine maintenance, storage, allocation and building maintenance works, printing sector, pharmaceutical processes, bug spray. Description: Protective Coverrals (Taped) Material: 55 gsm PP+PE Packing: 1 Piece in Each Package, 60 pcs in Each Carton Box Standarts: EN 14605:2005+A1:2009 (Type 3B, 4B), EN 13982-1(Type 5), EN 13034 (Type 6), EN 1073-2, EN 1149-5, EN 14126 Color: White
Blue SMS disposable coverall Type 5B / 6B Color:White / Blue / Green / Yellow Materials: SMS 50GSM With hood,zipper at front opening covered by flap,with elestic at hood, cuffs,waist and ankles
* With isolated, attached hood and protective effect, its suitable for medical personnel, who works with blood, body fluids and secretions of infectious coronavirus patients. It protects your skin from possible body fluids, germs, and chemicals. * Laminated and breathable fabric options: 53-56-60 gsm. * Disposable. * Complies with EN 14126 standards. *High Protection Against Liquid and Dust.
