Advanced Cement Mixing Kit with Cartridge and Nozzle
UOM: 6/PK
Product Number: 0306-573-000
Manufacturer: Stryker
Advanced Cement Mixing Kit Bowl UOM: 6/PK Product Number: 0606563000 Manufacturer: Stryke
The structure of kiln is simple, operate conveniently and reliably in life, less wearing parts, high rate of operation, it is the equipment to calcine high-grade cement in cement plant. Meanwhile, it is also widely used in metallurgical, chemical, construction and other industries. The rotary kiln produced by my company is with strong structure, operation smooth, high-quality products etc and can provide users with advanced high-performance vertical pre-heater, 5 degree cyclone pre-heater. Cement manufacturing consists of raw material grinding, blending, pre-calcining, clinker burning and cement grinding. In short, limestone and other materials containing calcium, silicon, aluminum and iron oxides are crushed and milled into a raw meal. This raw meal is blended and then heated in the pre-heating system to start the dissociation of calcium carbonate to oxide. The meal goes further into the kiln for heating and reaction between calcium oxide and other elements to form calcium silicates and aluminates at t a temperature up to 1450 centidegree: so called clinker burning. The cyclone system is attached to the rotary kiln by a riser duct. Secondary fuel is fed to the riser duct, the main fuel mixture, coal/petcock, fires the kiln. Reaction products leave the kiln as a nodular material called clinker. The clinker will be interground with gypsum and other materials to cement. The equipments we use in this whole production line are vibrating feeder, jaw crusher, impact crusher, cement ball mill, lifer, preheating system, cement rotary kiln and packing machine and so on. All the necessary equipments in this line can be provided by our factory. We have cement production line experts to design specific solutions for your preference.
MOBILE CONCRETE BATCHING PLANTS – MP The ultimate technology mobile plants, mounted on re-usable precast foundations. The foundations can be lifted and shifted to another location. Available with Planetary Mixer of 0.5 m3 compacted output per batch as well as Twin Shaft Mixer of 1.0 m3 compacted output per batch. •Accommodates four types of aggregates, two types of cement, fly ash, two types of chemical additives, fresh water and recycled water. •The compact design boosts the production capacity and fits in thin plot sizes. •Available with two levels of control system with decent features built in for contractors and ready-mix manufacturers. Models Available: SMP 30, MP 30, MP 60 SP 60, SP 70, SP 100, SP 120, SP 160.
Broad raw materials realize the great amount of mixing fly ash The raw material include cement, sand, rocks, coaly powder, ash, gravel, slag, pozzolana, and also industrial waste. According to different materials, it can make out products of different quality in scientific ways. High technology, nice quality and versatile, the machine can be fit with the block stacker as the simple production line. It is a simple production line with certain production scale and suitable for the small or the medium-sized plant., its maximum rated force is 120kn and the shaping cycle is 15-20second/time. The following is details for fzqt8-20: Type Specification Number Output per hour Block 390*190*190mm 8piece 1440 Concrete brick 240*115*53mm 36 piece 8640 Porous brick 240*115*90mm 18 piece 3240 Ground brick 200*100* 60mm 24 piece 5040 Size: 3700*2400*3000mm Total weight: 16000kg Power: 34.2kw Form of vibration: pressure molding vibration Frequency: 4500 times/minute Splint size: 870*870*38mm Shaping cycle: 15-20 seconds/time Maximum rated force: 120kn
Model PMG series high efficient ball mill have been designed with the merits of open circuit grinding system and important renovations on traditional ball mills. Besides they have all the good advantages of open circuit mills, production capacity has been raised substantially, product becomes super fine and blains have been increased. It has provided a new type of grinding equipment for producing high strength grade cement with high output and super fineness. Model PMG ball mill has adopted special integrate diaphragm and discharge grate to adjust material levels of every chamber so as to increase air ventilation and improve conditions inside mill; meanwhile it has also used new type of lining plate , regulated mill rotation speed, optimized design of bearings so as to increase its operational stability, use life and grinding efficiency. After being put into practice, it is proved that its output has been increased about 20% and unit product power consumption has been reduced 10%-12% down under the conditions that other parameters have not been changed by comparison to other same sized ball mill. White being operated in open circuit, specific surface of cement could be reached up to 320cm2/kg performance of it is up to national advanced standard .It has been awarded as well-known brand product of china building material machinery industry, "well know brand products", " appointed manufacture of national building material machinery industry" and etc. According to your needs.
Summary 1. Cf410s dispersant can significantly reduce cement slurry consistency, improve liquidity and rheolog- Ical behavior of cement slurry 2. Cf410s dispersantis applicable in a wide temperature range and can be resistant to 356°f (180°c). 3. Cf410s dispersant has salt resistence and still has good performance in 5%-10% brine cement slurry. 4. Cf410s dispersant is suitable for dry mixed as well as water mixed, soluble in cold water. 5. Cf410s dispersant is compatible with cement and other additives well. Special attentions The performance of cf410s dispersant will be obviously decreased when dispersant cf410s is used in brine system, whose concentration is higher than that of the half saturated brine. Applications Temperature:lower than 356°f (180°c) (bhct). Dosage: cf410s dispersant generally 0.2-2.0% (bwoc), recommend amount 0.5% (bwoc).
This additive is applied into oilfield cementing operation.Provides fluid loss control in low, normal and high density cement slurries. Applied below temperature of 180â??(356â??, bhct). Mixed with water when applied and no water quality is required. Generally, for moderate temp. 0.9%(mwoc)in fresh water, 1.25%(bwoc)in 18% salt water, for high temp. 18% salt water 2.5%(bwoc) Rachel hua | global service manager
We design and manufacture devices for new type dry method cement production line, which capacity from 300t/d to 4000t/d clinker. And we can also assist the client in transacting purchaser`s credit or chinese government`s credit while exporting. Rotary kiln is the main equipment for sintering cemnet clinker. The rotary kilns produced by our company can be divided into dry process and wet process. They can also be used for chemical industry, metallurgy industry and etc. Throught technical renovations, the rotary kiln sintering system equipment made by our company has adopted high measuring precession plunger pump, variable speed adjusted valve, contact graphite block air seal and other national advanced technologies. In order to raise up automation degree, indurstrial tv has been used at the kiln head for monitoring of kiln, analog fluorescent screen has been used for display of process flow; infrared scanning system has been adopted for sintering zone to directly reflect the burning conditions on the computer. With the use of these new technologies, it is directly in vision, convienent in operation and reliable in use. Therefore, the rmalcondition can be raised. Compared to been raised 3-5% up, production has been increased 5-10% and heat consumption has been reduced 15% down. Rotary kiln belongs to building material equipment, which can be divided into cement kiln, metallurgy chemical kiln and lime kiln according to different materials. Cement kiln is used for making of cement clinker and there are dry and wet methods to make cement. Metallurgy chemical kiln is used for magnetic roasting of iron ore and oxidizing roasting of chrome and nickel in the steel factory; baking high-alumina mine in the refractory material factory; baking chamotte and alumina in the aluminium factory and baking chrome ore and chrome powder in the chemical plant. Lime kiln is used for baking active lime and dolomite in the steel factory and ferroalloy factory.
Supplier: Liners, wear plates, mixing arms, mixing blades, mixing paddles, scrapers, tiles, side & floor lining and all types of concrete and cement mixer liners