TRIPLE ACTION FULLY AUTOMATIC MODEL NO-PTH8X8 CONTINUOUS THAT IS SCRAP PROCESSING MACHINE WITH 60HP MOTOR IN THIS MACHINE YOU CAN BALE LMS SCRAP,BRASS SCRAP,ALUMINIUM,CARDBOARD,TIN,COPPER SCRAP BALE SIZE 8''X 8'' CONTINUOUS MACHINE
TRIPLE ACTION FULLY AUTOMATIC MODEL NO-PTH8X8 THAT IS SCRAP PROCESSING MACHINE WITH 25HP MOTOR IN THIS MACHINE YOU CAN BALE LMS SCRAP,BRASS SCRAP,ALUMINIUM,CARDBOARD,TIN,COPPER SCRAP BALE SIZE 8''X 8'' MACHINE
Monoblock pumps -
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
- High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP
- Specially designed for wide voltage operation
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life
- Back pull-out design for easy servicing and repair
- Double shielded ball bearings, so no need of external lubrication
- All Model fitted to Mechanical seal.
specification
- Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 32 Mtr.
- Maximum Flow Rate : 940 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Method of Starting : Permanent Split Capacitor (PSC)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40,
50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm)
characteristics of clear cold water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : EN-8
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Plastic
Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- All Model fitted to Mechanical seal.
specification
Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 18 Mtr.
- Maximum Flow Rate : 4200 LPH
- Maximum Suction Lift : 8 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Single Phase, Clockwise from driving end
- Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
material Of construction - Motor
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : SS-410
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : Brass
Cooling Fan : Plastic
Product Type Other
Technology Other
Power Source Electricity
Operating Type Automatic
Power 420 Volt (v)
Pressure 6-7 Bar
Surface Treatment Painted
Supply Ability : 4 Unit Per Month
Price And Quantity:
Minimum Order Quantity 1 Unit
Price 325000.00 INR/Unit
Product Specifications:
Usage/Applications Casting, Forging, Sheet metal etc
Surface Treatment Painted
Power 420 Volt (v)
Weight (kg) Not applicable Metric Ton
Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions.
Power Source Electricity
Product Type Other
Operating Type Automatic
Pressure 6-7 Bar
Color Dark Blue
Technology Other
Rotary Barrel Shot Blasting Machine
Rotary Barrel Type Shot Blasting Machine is widely used in small or medium size iron, steel, alloy and non-ferrous castings, forgings, heat treated parts, pressings and fabrications at the lowest possible cost. The rotary barrel blasting machine employs a specialized internal geometry of the rotating barrel which features contoured ridges on the sides. This design facilitates the multi tumbling action of the drum's rotation, that allows the barrel to topple and mix the workpieces. This action makes sure that the blast stream passes through all surface area, thus providing equal and constant blast results. The machine also provides well-cleaned parts surfaces that are sand, rust, or scale free. It is ideal to use in applications requiring the blasting of small, flat, and light components.
Technical Specification:
Barrel Size: 649 MM Dia. x 625 MM Length
Total Weight Capacity: 100 Kg's
Volume: 1.5 CFT
Total HP Required: 5 HP
Product Details:
Product Type Other
Technology Other
Power Source Electricity
Operating Type Automatic
Power 420 Volt (v)
Pressure 6-7 Bar
Surface Treatment Other
Supply Ability : 7-10 Number Per Month
Price And Quantity:
Price Range 600000.00 - 800000.00 INR/Number
Minimum Order Quantity 1 Number
Product Specifications:
Product Type Other
Pressure 6-7 Bar
Technology Other
Usage/Applications Casting, Forging, Sheet Metal
Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions.
Weight (kg) 4.5-6.5 Metric Ton
Operating Type Automatic
Power 420 Volt (v)
Power Source Electricity
Surface Treatment Other
Color Dark Blue
Product Description
Hanger type shot blast machines designed and built as fully integrated blast cleaning systems to handle large/small or more fragile castings than barrel/table type machines. They provide a cost-effective solution for batch cleaning.
Hanger typeMachine consists of horizontal door with a rotating hanger type work/job handling system. This hanger is directly mounted on the door of the machine and itrotates on its own axis, drive unit of this hanger is provided outside the door. This hanger swings out as the door is opened, making the full area easily approachable for loading and unloading of the components. For loading the components, door of the machine is opened manually & components to be blasted are hanged one by one on to the door hanger and the door of the machineis closed.
Specification:
Number of Doors Single Door
Brand Adl Blastek
Power Required 14.5 HP
Capacity 10-15 ton/day
Voltage (V) 415 V
Driven Type Belt Driven Wheel
No. Of Blast Wheels 2
Wheel Size (inch) 12.5'' X 2.5''
Model Number BT-SPH-1
Load Carrying Capacity Of Hanger (kg) 300 Kg
Automatic Grade Automatic
Blast Wheel Power 5 HP
No. of Door with Hanger Hook 1
Diameter and Height Of Hanger Turning Meter 600 x 700 mm
TRIPLE ACTION FULLY AUTOMATIC MODEL NO-PTH12X12 CONTINUOUS THAT IS SCRAP PROCESSING MACHINE WITH 60HP MOTOR IN THIS MACHINE YOU CAN BALE LMS SCRAP,BRASS SCRAP,ALUMINIUM,,TIN,COPPER SCRAP BALE SIZE 12 X 12 CONTINUOUS MACHINE
TRIPLE ACTION FULLY AUTOMATIC MODEL NO-PTH10X10 CONTINUOUS THAT IS SCRAP PROCESSING MACHINE WITH 60HP MOTOR IN THIS MACHINE YOU CAN BALE LMS SCRAP,BRASS SCRAP,ALUMINIUM,,TIN,COPPER SCRAP BALE SIZE 10X 10 CONTINUOUS MACHINE
TRIPLE ACTION FULLY AUTOMATIC MODEL NO-PTH9X9 CONTINUOUS THAT IS SCRAP PROCESSING MACHINE WITH 60HP MOTOR IN THIS MACHINE YOU CAN BALE LMS SCRAP,BRASS SCRAP,ALUMINIUM,CARDBOARD,TIN,COPPER SCRAP BALE SIZE 9''X 9'' CONTINUOUS MACHINE
The LGYF-1500A-II continuous induction sealer utilizes electro magnetic induction principle to produce instant high heat to melt aluminum foil. Then it adheres to the bung hole, reaching the aim of wet-proof, leakage-proof, mildew-proof and extending preservation time. Now it is widely used as sealing package machine in industries such as pharmaceuticals, pesticides, pesticides, lubricant and cosmetics etc.
Specification of LGYF-1500A-II Continuous Electromagnetic Induction Sealer
Model LGYF-1500A-II
voltage 220V 50/60HZ
Power 1.5KW
Capacity 0-10m/min
Sealing Diameter 20-50mm
Height of bottles 40-300mm
Machine weight 38kgs
Machine size 1150*480*400mm
