Force Table

Use of forced convection heating section from top to bottom, so that the upper and lower surface of heated evenly, in thermal efficiency also has a big improvement. Mainly for the production of construction, decoration, household appliances, industrial instruments such as using high-grade flat glass. Note: The table dimensions are in millimeters as a unit, yield 80% according to 5mm glass loading rate was 100% finished product rate, the glass can cause changes in the thickness of the scope of production change. Model ×î´ó³ß´ç Max. Size(mm) ×îС³ß´ç Min. Size(mm) ºñ¶È Thickness(mm) ²úÁ¿ Capacity(m²/h) QYP-D3020 3000¡Á2000 300¡Á100 4-19 114 QYP-D3620 3660¡Á2000 300¡Á100 4-19 139 QYP-D3624 3660¡Á2440 300¡Á100 4-19 169 QYP-D4224 4220¡Á2440 300¡Á100 4-19 194 QYP-D5024 5000¡Á2440 300¡Á100 4-19 219 QYP-D6024 6000¡Á2440 350¡Á150 5-19 263 QYP-D8024 8000¡Á2440 350¡Á150 5-19 351. Packing:wooden boxes.

BACK PAINTED GLASS has another name --Lacquer Glass. It is used for Wardrobe, Table, Wall, Kitchen, Partition,Reception, Sliding Room and so on. It is produced on the same line with mirror.Neo Painted Glass is usually with double paint unless the customer has special requirement. The adhesive force between the glass and the paint is very strong. The basic glass can be Low Iron Glass/Ultra Clear Glass, and Clear Glass or the one the customer appoints to. Back Painted Glass is available on different colors due to the various colors of Paint, such as White, Super White, Black, Red etc. It can be vinyl back to become Safety Glass. It is widely used as Partition Glass, Table Glass, Wall Glass, Splashback, Kitchen Glass, Furniture Glass, Sliding Door etc. Back Painted Glass can also be laminated to be Laminated Painted Glass AS/NZS 2208:1996 certificate is available for Back Painted Glass/Lacquered Glass with Grade A vinyl Back to Australia and New Zealand Market Size: Max. 2440 x3660 mm Thickness: 3-8mm Certificates: AS/NZS 2208: 1996, CE, ISO 9002 Glass: Float Glass, Annealed Glass,Low Iron Glass Glass Color: Clear, Low Iron, Grey,F-Green, Bronze,Blue Etc Glass Process: Float Glass, Glass with Polished Edges/Holes/ Cutout , Irregular Shape Paint: Italian Fenzi, Qualified China brand Paint Color: White, Ultra White, Black, Red, Grey etc. Package: Plywood End Cap, Plywood Crate, Metal End Cap, Carton Package, Pallet Etc

BACK PAINTED GLASS has another name --Lacquer Glass. It is used for Wardrobe, Table, Wall, Kitchen, Partition,Reception, Sliding Room and so on. It is produced on the same line with mirror.Neo Painted Glass is usually with double paint unless the customer has special requirement. The adhesive force between the glass and the paint is very strong. The basic glass can be Low Iron Glass/Ultra Clear Glass, and Clear Glass or the one the customer appoints to. Back Painted Glass is available on different colors due to the various colors of Paint, such as White, Super White, Black, Red etc. It can be vinyl back to become Safety Glass. It is widely used as Partition Glass, Table Glass, Wall Glass, Splashback, Kitchen Glass, Furniture Glass, Sliding Door etc. Back Painted Glass can also be laminated to be Laminated Painted Glass AS/NZS 2208:1996 certificate is available for Back Painted Glass/Lacquered Glass with Grade A vinyl Back to Australia and New Zealand Market Size: Max. 2440 x3660 mm Thickness: 3-8mm Certificates: AS/NZS 2208: 1996, CE, ISO 9002 Glass: Float Glass, Annealed Glass,Low Iron Glass Glass Color: Clear, Low Iron, Grey,F-Green, Bronze,Blue Etc Glass Process: Float Glass, Glass with Polished Edges/Holes/ Cutout , Irregular Shape Paint: Italian Fenzi, Qualified China brand Paint Color: White, Ultra White, Black, Red, Grey etc. Package: Plywood End Cap, Plywood Crate, Metal End Cap, Carton Package, Pallet Etc. Plywood End Cap Plywood is one of the materials free of fumigation. It is safe to use the package with the design " End Cap" to deliver the glass. Besides,it is also easier and quicker for operators on the floor to unpack the glass on the trolley. Naked Package Naked Package take less trouble to the customers to handle the package material. A frame is made of metal.It is easy to be disassembled by tool and stocked on the corner or some place else. Metal End Cap Metal End Cap is another design for package.Metal material is welded together, then it is not easy for the end cap to be distorted during the transportation and damage the glass especially there is storm on the ocean. Carton Package The specification of the glass on some part are standard in some countries, such as on the Door, Window etc.Mass production in advance and wholesale in the shopping mall become workable on them.

4. Performance specifications 1. Temperature range: RT+40 -70 2. Humidity range: 90% RH 3. Temperature control accuracy: ± 3 *Note: The performance guarantee of item # 5 above requires testing at a distance of 1/6 of each wall surface in the testing area, and must be measured after stabilizing with temperature and humidity for 30 minutes 4. Equipment placement space: at least 207 two hundred and seven 201cm (W H D) 5. Power supply: AC220V 50HZ 5 System structure 1. Heating system: Scaled stainless steel electric heating tube 2. Humidification system: glass nozzle 3. Temperature sensing system: Made of stainless steel SUR304Pt100 4. Control system: The control system adopts a P.I.D controller, which controls temperature and humidity simultaneously a. Controller specification: Accuracy: Temperature ± 2.0 +1 digit, with upper and lower limit standby and alarm functions 5. Box material Inner box material: SUS # 304 mirror stainless steel plate Outer box material: SUS # 304 stainless steel plate

model Basic parameters DL-60 DL-90 DL-120 DL-160 DL-200 Dimensions inside the test chamber (Long �? wide �? High) 600*450*400mm 900*600*500mm 1200*1000*500mm 1600*1000* 500mm 2000*1200* 600mm Test chamber volume 108L 270L 600L 800L 1440L Volume of brine tank 15L 25L 40L 40L 40L Laboratory temperature NSS ACSS 35�±1â??ï¼?CASS 47�±1â?? Pressure barrel temperature: NSS ACSS 47�±1â??ï¼?CASS 63�±1â?? Brine temperature: 35â??�±1â?? Spray mode Ordinary type without suffix letter, economical type (M) continuous spray (A), programmable spray (B) Spray volume: 1.0ï½?2.0ml/80cm2/h(Different mist collectors need to be converted according to this ratio) Spray pressure 1.00+0.01kgf/cm2 source AC 220V 10A AC220V 10A AC220V 16A AC220V 16A AC220V 16A

2.Technical parameters: 1. Box size in the laboratory: DL-120LA W1200 * D1000 * H500 (mm), Approximate dimensions: 2300 * 1300 * 1400mm, 2 standard temperatures, Laboratory temperature: nss acss 35 ± 1 /pass 50 ± 1 Pressure bucket humidity: nss acss 47 ± 1 /pass 63 ± 1 , Salt water temperature: 35 ± 1 It can be heated without water, 3 volumes, Laboratory capacity: 800L Salt water tank capacity: 40L, 4 compressed air, Compressed air pressure: 1.00 ± 0.01kgf/c 5 spray volume: 1.0-2.0ml/80c /h, 6 spray mode: continuous spray, timed spray, programmable spray, intermittent spray, demisting in the box, 7. Power supply: AC220V 50Hz/20A, 8. Material: The entire PVC board is made, and the salt spray testing machine adopts advanced three-dimensional reinforcement technology internally, with a strong and solid structure that never deforms. 9. Water adding method: An automatic water adding system is adopted, which has the function of automatically replenishing the water level when the water level is insufficient, and the test is not interrupted. 10. Nozzle: Precision glass nozzle, salt spray testing machine used for 4000 hours to ensure no crystal blockage. 11. Protection system: Equipped with dual over temperature protection and insufficient water level warning to ensure safe use. 12. Temperature controller: digital display, PID control, high stability platinum temperature probe, error 0.3 13. Heating method: The laboratory adopts direct steam heating method, which increases the temperature quickly and shortens the standby time of the salt spray testing machine. 14. The spray tower is equipped with two conical dispersers, which have the functions of guiding fog, adjusting fog volume, and even fog falling. 15. The pressure bucket adopts Henry's law to heat and humidify, and provide the humidity required by the salt spray testing machine laboratory. 16. Opening method: Pneumatic automatic opening is adopted, The salt spray testing machine is one of the "three prevention" (humid heat, salt spray, mold) testing equipment for artificial climate environments. It is an important salt spray testing equipment for studying the adaptability and reliability of various environments in industries such as machinery, national defense, light industry, electronics, light industry electronics, and instruments. This salt spray testing machine can perform neutral salt spray tests in accordance with GB/T2423.17 "Basic Environmental Testing Regulations for Electronic and Electrical Products - Test Ka: Salt Spray Test Method", and can also perform acetate spray tests. This salt spray tester complies with CNS, ASTM, JIS and ISO standards. The salt spray test is to test the corrosion resistance of the products after coating, electroplating, Anodizing, anti-rust oil and other anti-corrosion treatments on the surfaces of various materials.

1.)Performance specifications: 1. Machine model: DL-4100, 2. Capacity: 100L, 3. Temperature range: -40 -150 , 4. Humidity range: 20% -98% RH, 5. Temperature and humidity control accuracy: ± 0.5 ± 2% RH, *Attention: The performance guarantee of items # 2-4 above should be measured after 30 minutes of stable temperature sensing 6. The temperature and humidity are evenly distributed: ± 2.0 ± 5.0% RH, *Note: The performance guarantee of item # 5 above requires testing at a distance of 1/6 of each wall surface in the testing area, and must be measured after stabilizing with temperature and humidity for 30 minutes 7. Inner box size: 500 high Width 400 500mm deep, 8. Outer box size: 1700 high Width 1000 1500 mm deep, 9. Equipment placement space: at least 2000 2000 2000mm (W H D) , 10. Power supply: AC220V 4.5KW, 50HZ