0.7-4.5X all-in-one optical magnification, 10.6-inch display, 2 million pixel high-speed digital camera for phone logic board repair work and inspection
The whole machine has only one power input plug, and the installation and wiring are simple.
0.7-4.5X All-in-One 3D Integrated Microscope with 10.6 Inch Display for Mobile Phone PCB Repair
Machine parameter introduction:
Integrated design, patented appearance design, the screen can be rotated and folded
The whole machine has only one power input plug, easy to install and connect
Comparison Note: For traditional video microscopes, the display is suspended separately
There are three power cables in total, namely camera, display and light source. but troublesome to install
Display: 10.6-inch IPS full-view display, can be rotated 270 left and right, can be folded 180 front and back
Display resolution
All-in-one Multifunctional 2D Integrated Digital Microscope with 10.6 Inch Display for Mobile Phone Logic Board Repair
Machine parameter introduction:
Integrated design, patented appearance design, the screen can be rotated and folded
The whole machine has only one power input plug, easy to install and connect
Comparison Note: For traditional video microscopes, the display is suspended separately
There are three power cables in total, namely camera, display and light source. but troublesome to install
Scope :
Display: 10.6-inch IPS full-view display, can be rotated 270 left and right, can be folded 180 front and back
Display resolution: 1366 768 1920 1080
Digital camera: 1 2.5 inches, 2 million pixels, high speed
Image resolution: 1920 1080
Frame rate: 45 frames per second
Output interface: USB 2.0 output HDMI-USB 2.0 output
Optical magnification: 0.7 4.5
Electronic magnification: 17 130 (standard) up to 1000 times
Auxiliary light source: 72 high-brightness 5mm LED lamp beads, adjustable brightness
Focusing type: column focusing bracket
Workbench: 320 260mm
External equipment: computer (camera, video) computer (camera, video) monitor (different sizes are optional)
Menu function: Chinese and English OSD menu, brightness, sharpness, color saturation, automatic exposure, monochrome, wide dynamic range, automatic white balance, one-key white balance, red, green, blue, default, Chinese and English, vertical mirror, horizontal Mirror image, negative film, same screen comparison, line group, 8 vertical lines, 8 horizontal lines, line color, line width
Optional objective lens 0.35X, 0.5X, 1X, 2X
Optional eyepieces 0.5X, 1X, 2X
The first time you press it, the camera parameter adjustment interface will appear on the screen, and the second time the menu will be closed. Up and down keys, and keys for parameter decrement and increment, Option cursor up/row selection, option value minus/row move, option value plus/OK/row move
Option Cursor down/line selection, the key is the menu key
Press it for the first time, the camera parameter adjustment interface appears on the screen, press the menu for the second time to close the menu, move UP and DOWN up and down to select menu options for parameter reduction and increaseis also the key to enter the option
Fool type 0.7-4.5X integrated trinocular stereo microscope with display + HDMI output + USB2.0 output interface
0.7-4.5X trinocular integrated microscope with HDMI output + USB2.0 output interface, multifunctional portable optical magnification for mobile phone logic board repair, with 0.4X camera interface eyepiece. The adjustable range of continuous zoom is 5 diopters Trinocular spectral imaging
Menu function:
Chinese and English OSD menu, brightness, sharpness, color saturation, automatic exposure, monochrome, wide dynamic range, automatic white balance, one-key white balance, red, green, blue, default, Chinese and English, vertical mirror, horizontal Mirror image, negative film, same-screen comparison, line group, 8 vertical lines, 8 horizontal lines, line color, line width
External equipment: computer (camera, video recorder) monitor (different sizes are available), which can be observed and synchronized in time
Parameters :
Display:10.6 inch IPS full-angle display, can be rotated 270, left and right, can be folded 180, back and forth
Digital Camera: 1/2.8 inch, 2 million pixels
Image Resolution: 1920 1080
Frame Rate: 45 frames/second
Output interface: HDMI output + USB2.0 output
Optical Magnification: 7-45X
Electronic Magnification: 13-104 (standard 10.6 inch) 20-245X (21 inch) Max 1000X
Camera Interface Eyepiece: 0.4X (large viewing angle, no vignetting)
Observation Head: inclined at 45, and the viewing binocular observation head can make 360, the adjustment range of interpupillary distance: 54-76mm, both eyepiecestalk visibility can be adjusted, and adjustable range is 5 diopters, trinocular spectroscopy imaging
Continuous Zoom: 1 : 6.5
Eyepiece: wide field, high-point eyepiece WF10X20, it can observe image of observation specimen with glasses
Working Distance: Standard working distance 100mm, but extended range of working distance is 30mm-265mm with auxiliary objectives
Auxiliary illuminant: 72 high-brightness 5mm LED lamp beads, brightness can be adjusted
Bracket: optional flat bracket, base with tablet and 95mm black and white work board
Column Height: 240mm
Column Diameter: 32mm
New 3D Smart Digital Microscope Based on 2D Observation HDMI 3D Digital Video Microscope with 3D Angle Attachment
35�° (degrees) 3D viewing angle accessory integrates magnification, imaging, display and LED lighting
2D / 3D Digital Microscope with 21MP HDMI Camera 0.5X Type C Lens Adapter 35�°(Degree) 3D Viewing Angle Attachment LED Light Base Bracket Without LCD Screen Display.
Note: Do not clean the 3D microscope lens with alcohol or water. And the lens cannot be wiped with hands or other cloths, only with dry medical cotton balls.
The 3D digital microscope revolutionizes the traditional microscopic observation method and adopts the modern electronic imaging method. The new 3D digital video microscope makes observation more comfortable and completely solves the fatigue caused by long-term use of traditional microscopes.
Provide HDMI high-definition video:
Standard Model: 20MP Camera HDMI USB Output
Sensor: 1/3 inch 20.0MP
Picture format: jpg
Image resolution: 1920*1080 (for HDMI)
Video format: AVI
Video resolution: 1600*1200@30F/S
White Balance: Automatic
Light: Automatic
Colour: Black
Negative: support
Feeling: Left/Right, Up/Down
Freeze: support
OSD: English/Chinese
Lines: different colors, 8 horizontal lines, 8 vertical lines, any position
Tuning Guide for: 3D Digital Microscopes
Turn on the camera and LED ring light, and the image signal is displayed on the screen.
Focusing adjustment
Adjust the zoom body to a maximum magnification of 4.5x, then adjust the focus to display a clear image on the screen. Adjust the magnification of the zoom body to 0.7x, and if the image becomes blurred, adjust the fine focus on the video coupler (part b of the right image) to get a sharp image again. Make one or more adjustments to realize the parfocal function of the microscope, and keep the image always clear when the magnification is continuously changed
After the parfocal function is achieved, there is no need to fine-tune the video coupler for subsequent operations (part b of the right picture)
Coaxial alignment
Put the crosshairs under the microscope and adjust the zoom body to the maximum. Zoom in 4.5 times to make the crosshairs appear in the center of the screen, then adjust the zoom body to the minimum magnification of 0.7 times, if the crosshairs deviate from the center of the screen, adjust the four screws on the video coupler (part a) as shown above) to make The crosshair reappears in the center of the screen with one or more adjustments to achieve an on-axis centering feature that keeps the center of the image fixed during successive changes in magnification
Parameter:
Camera resolution: 1920*1080P 60 frames
Output interface: HDMI USB
Direct storage: USB software capture
Function: 3D function, 360 degree rotation observation, super strong stereo feeling
Optical magnification: 0.7-4.5X
Electronic magnification: 20-160X (based on screen selection)
Optical microscope: 0.7-4.5X continuous zoom host, 0.5X eyepiece
LuxOR LX3 Ophthalmic Microscope Help eye surgeons see in beautiful detail with all the LuxOR LX3 ophthalmic microscope from Alcon.
The range's ILLUMIN-i technology provides an excellent red reflex and depth of field, allowing surgeons to work quickly and confidently. Should you require an assistant scope, pair the LX3 with the Q-VUE 3D assistant visualization update. It sports a different magnification changer and accurate 3D stereo imaging that does not take light in the optical pathway. Wireless foot controller and A touch screen allow customization of favored doctor settings.
Surgical Operating Microscope:
Optics : Apochromatic
Eyepiece : High Eye point eye piece with 10x power & -6 to +6 dioptor adjustment
Binocular : 90° Straight, 45° Inclined or 0-210° tiltable binocular with 55 to 75 mm ipd adjustment
Magnification : 3 steps or 5 steps or Continuous zoom - motorized
Objective Lens : 200 mm, 400 mm, 250 mm, 300 mm fixed or 200-500 mm variable - motorized
Illumination : High Power LED or Xenon
Locks : Mechanical or Magnetic
Camera : Integrated
Mounting : Floor Stand, Wall mount or Ceiling mount
CATIA V5 is the leading solution for product development success. It addresses all
manufacturing organizations, from OEMs through their supply chains, to small
independent producers. CATIA, for virtual product design, can be applied to a wide
variety of industries, from aerospace, automotive, and industrial machinery, to
electronics, shipbuilding, plant design, and consumer goods. Today, CATIA is used to
design anything from an airplane to jewelry and clothing. With the power and functional
range to address the complete product development process, CATIA supports product
engineering, from initial specification to product-in-service, in a fully-integrated manner. It
facilitates reuse of product design knowledge and shortens development cycles, helping
enterprises accelerate their response to market needs.
Empower end-to-end industry process coverage for composite design to
manufacturing, electrical harness design to documentation and printed circuit
board design.
Increase range of manufacturing part designed with Functional modeling
Superior productivity for powertrain and chassis designer with breakthrough
auto-draft
Extends the scope for multi-discipline 3D collaborative environment with
ENOVIA VPLM Navigator
Expands the reach of 3D to a wider community with CATIA 3DLive and 3D XML
Zeiss OPMI Neuro NC-4 Surgical Microscope
Manufacturer year : 2010
Used condition like new, Excellent and ready to work
Come with warranty 12 month
Features:
The Zeiss OPMI Neuro NC-4 Surgical Microscopes is one of the most successful neurosurgical systems by Zeiss. It has been established as one of the best-integrated imaging systems. With its legendary optics and ergonomic innovations, making it the ideal microscope for most neurological suites. The OPMI Neuro NC-4 is one of the first Zeiss Surgical microscopes to integrate a Heads-UP Display and AutoFocus. This scope will accommodate most neuro-navigational systems. The immediate precursor to Zeissâ?? latest Opmi Pentero, this was a Zeiss standard for many years. When Zeiss engineered this system, they had in mind easy balancing as well as seamless integration of the optics, mechanics, and electronics. This microscope doesnâ??t stray too far from the bells and whistles of the Pentero, while cutting the price tag by more than half.
- Optional Side Observer
- Face to face bridge
- Variable, Motorized Focal Distance
- 0-180 degree inclinable binoculars
- Easy Balancing
- Brilliant
- Clear Optics
Zeiss OPMI Pentero 800 Neurosurgery Microscope
Manufacturer year : 2015
Used condition like new, Excellent and ready to work
Come with warranty 12 month
Features :
Motorized zoom; Zoom ratio 1: 6
Varioscope: The focal length of the lens is electrically adjustable from 200mm to 500mm
Magnification of the eyepieces: 10x
Adjust the inclination of the eyepiece from 0 to 180 degrees
Xenon light: 300 W - Superlux 330
Adjustable light intensity
Power supply: 115 V-230 V / 24 V
Microscope arm and head blocked by means of electromagnetic brakes
Autofocus with 2 visible laser spots, automatic mode with magnetic brakes
Programmable multifunctional handles.
Package include :
- Integrated 3 CCD video camera
- Zeiss OPMI Pentero Optics
- Face to Face Bridge
- 2 x binocular head with adjustable angle from 0 to 180 degrees
- Visual focusing aid with two converging laser spots
- Varioskop
- Auto-Balance - AutoBalance of the microscope, suspension system or entire system by pushing a button
- MultiVision System - Integrated data display with shutter function
- AutoDrape System - Integrated vacuum system to remove air from sterile drape for fast and easy draping
- Floor Stand
- Touchscreen.
- Handgrips.
