Fischer Tropsch Wax Synthetic Wax

Natural Palm wax for candle making Acid value(mgKOH/g) 0.9max Peroxide number(mmol/kg) 3.9max Moisture(%) 0.05max Color(Lovibond,133.4mm cell) 3.0R max Melting point(C) 48- 70 Appearance Fine white solid at room temperature; light yellow, limpid and transparent when melted by heating; no peculiar smell, no impurity Ingredient 100% hydrogenated vegetable oil without mineral wax Shelf life 12 months from when it is produced Waxing is a breeze with Formula 1 paste wax that goes on fast and wipes off easily, giving you a high glossy shine with water beading protection. Enjoy smooth and bright protection that only pure Carnauba wax can give for up to 12 months. Periodic application of the wax is recommended for best results.

China Carnauba Wax supplier Carnauba wax, also known as card that Pakistan wax, yellow solid angle, can be bleached, hard and brittle, not soluble in water, soluble in hot ethanol, hot ether, hot chlorine letter, carbon tetrachloride, oils,. The main components of palmitic acid ester and wax beeswax acid, cosmetic raw material of a hardness of the wisest, and castor oil and other fats and oils and raw materials, good compatibility, Cosmetics commonly used for tablets curing agent, widely used in lipsticks and cream cream category cosmetics, As a substitute for beeswax to enhance the melting point of spindle-shaped cosmetics, gives luster and heat stability. Specification specNo.1 standrad value color gold yellow surface flakes Smell bees wax smell peroxide value 4 acid value(koh/mg/g) 4 Saponification(koh/mg/g) 78-95 melting point C 80-86 viscosity(cp)C 21.6 standard value 5-14 specific gravity 25C 0.997 flash point C 318

Commodity: Synthetic Cryolite Formula: Na3AlF6 M.W.: 209.95 Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively. Specifications: Appearance white powder F 52% min Al 12% min Na 33% max SiO2 0.36% max Fe2O3 0.08% max CaO 0.5% max P2O5 0.03% max SO4 0.6% max H2O 0.4% max Loss on ignition 2 % max Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels. Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.