Airish Plus CLEAN SHIELD Health Mask FFP2 A necessary health mask for safe and pleasant breathing by filtering the yellow dust, fine particles, and source of infections that threatens our daily life. The three-stage folding design makes it easy to wear and easy to carry around. High-efficiency filters provide an excellent defense. Highly hermeticity and easy to breathe is a three-dimensional structure. The mask's interior space is wide, so it's comfortable to use for a long time 1. Three-dimensional structure with easy breathing 2. Protection from PM2.5 & Fine Dust, Infectious Source 3. Highly defensive FFP2 High-Efficiency Filter
Electro-static paint High quality 2 wheels 360 motion
for medical use
Vertical fold-flat, without exhalation valve Welded elastic earloops Imbedded nose clip, sponge nose lining CE approved by UNIVERSAL (NB no. 2163) Tested and certified according to EN 149:2001+A1:2009 Class: FFP3 NR This respirator mask is certified and classified as FFP3 under EU standard EN 149:2001+A1:2009. EN 149:2001+A1:2009 - Respiratory protective devices - Filtering half masks to protect against particles. This European Standard specifies the minimum requirements for filtering half masks used as respiratory protective devices, specifically against particles, and the required laboratory and practical performance tests to assess masks' compliance. EN 149:2001+A1:2009 classified half masks into three types according to their filtering capacities: FFP1, FFP2 and FFP3. Respirators that meet the requirements of EN 149:2001+A1:2009 are designed to protect against solids, water-based aerosols, and oil-based aerosols. FFP3 masks have a minimum of 99% filtration percentage and maximum 2% leakage to the inside. They are mainly used in construction, agriculture, and by healthcare professionals against influenza viruses.
Vertical fold-flat, without exhalation valve Welded elastic earloops Imbedded nose clip, sponge nose lining CE approved by UNIVERSAL (NB no. 2163) Tested and certified according to EN 149:2001+A1:2009 Class: FFP3 NR This respirator mask is certified and classified as FFP3 under EU standard EN 149:2001+A1:2009. EN 149:2001+A1:2009 - Respiratory protective devices - Filtering half masks to protect against particles. This European Standard specifies the minimum requirements for filtering half masks used as respiratory protective devices, specifically against particles, and the required laboratory and practical performance tests to assess masks' compliance. EN 149:2001+A1:2009 classified half masks into three types according to their filtering capacities: FFP1, FFP2 and FFP3. Respirators that meet the requirements of EN 149:2001+A1:2009 are designed to protect against solids, water-based aerosols, and oil-based aerosols. FFP3 masks have a minimum of 99% filtration percentage and maximum 2% leakage to the inside. They are mainly used in construction, agriculture, and by healthcare professionals against influenza viruses.
Fully-automatic FFP2/FFP3 Mask Making Machine | Respirator Production Line It is a high-quality fully-automatic FFP2/FFP3 mask production line we launched by working with a German company. This mask making machine for producing FFP2/FFP3 face masks. Protective face mask in GB2626, EN149 and OSHA standards is called particulate respirator. The machine makes 4-to-6-ply respirators/masks automatically by the following procedures. 1) Unwinding and feeding fabrics 2) Welding and laminating fabrics 3) Feeding and positioning nosepieces 4) Feeding and welding earloops 5) Folding face masks 6) Cutting the face masks The above process is done automatically and continuously by PLC. Features: 1) Fully-automatic. 2) High-speed and speed adjustable. 3) Multiple ultrasonic systems employed produce reliable welding. 4) Easy to use. The touch-screen control system makes operation easy. 5) Alarm when the fed material breaks or is in short. 6) A counting system makes the quantity of produced masks visible and make it possible to set the mask quantity of each stack for the conveyors. Specifications: Power supply: 14 kW Running power: 2.5 kW Capacity: max. 50 pcs/min Weight: 2000 kg Dimensions: 9800(L)*1335(W)* 2008 (H)mm Site level: class 100000 cleanroom Compressed air: 6 bar, pre-filtered, 23L/min Fold symmetry: ±2mm
IT IS THE SLIMMEST MODEL XRAY VIEWER MANUFACTURERED IN INDIA WITH A THICKNESS OF 25MM (JUST 1INCH). HIGH BRIGHTNESS MORE THEN 10,000 LUX EXCLUSIVE FOR VIEWEING DETEL IMAGE FREELY. EXCELLENT UNIFORMITY OF LUMINANCE WHICH IS MORE THEN 90%. ADOPT LED LIGHT SOURCE WITH LIFE OF 100,000 HOURS. ALL THE FOUR SIZES COMES WITH DIMMER (INTENSITY CONTROLLER) AND FILM SENSOR(AUTO SWITCH) FOR EACH BANK INSTALLED SEPERALTY, FOR EXAMPLE SINGLE FILM WILL HAVE ONE DIMMER AND ONE SENSOR, TWO FILM HAVE TWO DIMMER AND TWO SENSOR, THREE FILMS HAVE THREE DIMMER AND THREE SENSOR, FOUR FILM HAVE FOUR DIMMER AND FOUR SENSOR,. FLICKRING FREE.,HENCE REDUCE EYE FATIGUE., INBIULT POWER SUPPLY. THE POWER DESIGN WORKS WELL WITHIN ACC100-270V, WALL & TABLE MOUNTED. ON DEMAND WE CAN SHIFT THE SWITCH BOARD RIGHT SIDE TO FRONT SIDE FOR THE PURPOSE OF EASY INSTALLATION OF OUR PRODUCTIN OPERTION THEHTERS. VIEWING AREA - 14X17INCH DIMENSTION - 505X504X25MM LIGHT SOURCE - LED BRIGHTNESS - 10,000LUX LED LIFE - 1,00000HOURS POWER - AC 100-270V (47-53HZ) POWER SUPPLY - 30W
It Is the Slimmest Model Xray Viewer Manufacturered in India With a Thickness of 25mm (Just 1inch). High Brightness More Then 10,000 Lux Exclusive for Vieweing Detel Image Freely. Excellent Uniformity of Luminance Which Is More Then 90%. Adopt Led Light Source With Life of 100,000 Hours. All the Four Sizes Comes With Dimmer (Intensity Controller) and Film Sensor(Auto Switch) for Each Bank Installed Seperalty, for Example Single Film Will Have One Dimmer and One Sensor, Two Film Have Two Dimmer and Two Sensor, Three Films Have Three Dimmer and Three Sensor, Four Film Have Four Dimmer and Four Sensor,. Flickring Free.,hence Reduce Eye Fatigue., Inbiult Power Supply. The Power Design Works Well Within Acc100-270v, Wall & Table Mounted. On Demand We Can Shift the Switch Board Right Side to Front Side for the Purpose of Easy Installation of Our Productin Opertion Thehters. Viewing Area - 28x17inch Dimenstion - 884x504x25mm Light Source - Led Brightness - 10,000lux Led Life - 1,00000hours Power - Ac 100-270v (47-53hz) Power Supply - 60w
It Is the Slimmest Model Xray Viewer Manufacturered in India With a Thickness of 25mm (Just 1inch). High Brightness More Then 10,000 Lux Exclusive for Vieweing Detel Image Freely. Excellent Uniformity of Luminance Which Is More Then 90%. Adopt Led Light Source With Life of 100,000 Hours. All the Four Sizes Comes With Dimmer (Intensity Controller) and Film Sensor(Auto Switch) for Each Bank Installed Seperalty, for Example Single Film Will Have One Dimmer and One Sensor, Two Film Have Two Dimmer and Two Sensor, Three Films Have Three Dimmer and Three Sensor, Four Film Have Four Dimmer and Four Sensor,. Flickring Free.,hence Reduce Eye Fatigue., Inbiult Power Supply. The Power Design Works Well Within Acc100-270v, Wall & Table Mounted. On Demand We Can Shift the Switch Board Right Side to Front Side for the Purpose of Easy Installation of Our Productin Opertion Thehters. Viewing Area - 42x17inch Dimenstion - 1257x504x25mm Light Source - Led Brightness - 10,000lux Led Life - 1,00000hours Power - Ac 100-270v (47-53hz) Power Supply - 90w
