450 kg Passenger Elevator Capacity: 450 Kg, Passenger: 06 Persons Speed: 1 m/s , Stops:10 , Floor mark: G,1,2,3,4,5,6,7,8,9 Traction Motor: Gearless Traction 3.5 KW Motor Roping System -2:1 Cabin: Mirror Etching Stainless Steel 304 Cabin Door: Mirror Etching Stainless Steel 304 Ground Floor Door: Titanium Golden Mirror Etching Stainless Steel 304 Ground Floor wide jam with Transom Panel : Titanium Golden Mirror Stainless Steel 304 Others Floor Door: Hairline Stainless steel 304 COP Type: Full Height of cabin COP Display: 10.4 Inch TFT Display Transom Panel display: 10.4 Inch TFT Display LOP Display: 4.5 Inch TFT Display LOP face Plate: Mirror Stainless Steel 304 Buffer System: Hydraulic Over Speed Controller All Standard Safety
Product specifications/features : 1). Effective and energy-saving 2). Green environmental protection 3). Stable and reliable 4). Space-saving & low noise 1. The matured and reliable serial communication 2. Smooth start, quiet moving 3. Top advanced door operator system 4. Efficiently & swiftly perfect green space enjoyment of Nature & harmony 5. Worm-gear traction machine 6. Automatic lighting of led energy-saving lamp 7. Electromagnetic compatibility without interference with Each other 8. Voice reporting 9. Photocell protection Primary competitive advantages : Well and high quality control Prompt delivery Customer's designs and logos are welcome Competitive prices Earth-friendly products Small order acceptable Odm accepted Oem accepted Wooden cases packing
Product specifications/features : 1) effective and energy-saving 2) green environmental protection 3) stable and reliable 4) space-saving & low noise 1.The matured and reliable serial communication 2.Smooth start, quiet moving 3.Top advanced door operator system 4.Efficiently & swiftly perfect green space enjoyment of Nature & harmony 5.Worm-gear traction machine 6.Automatic lighting of led energy-saving lamp 7.Electromagnetic compatibility without interference with Each other 8.Voice reporting 9.Photocell protection Primary competitive advantages : Well and high quality control Prompt delivery Customer's designs and logos are welcome Competitive prices Earth-friendly products Small order acceptable Odm accepted Oem accepted Wooden cases packing
Passenger Lifts The lift is ideal for retrofit within existing buildings with min. adjustment on site self-supporting steel structure minimum headroom pit 350 mm instead of 1300 mm pre-installed cabin and drive unit easy installation controller with micro-processor plug-in system complete drive unit in headroom (no separate machine room necessary) Technical information The information given below lists main features of our passenger lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles with guides T 70 x 65 x 9 Buffer 80/80 Cabin Cant-off system made of galvanized steel, adjustable guides shoes on two sides + emergency guiding Compensation device on suspension chain floor PVC covered Cabin light (flush installation) - Cabin ventilation Cabin push button station - emergency call - emergency light - emergency telephone call pre-installed Governor operated safety, type tested Special cabin apron (registered design application) Hinged doors ISO-PM 225 manual operated hinged doors, made of primed painted steel, window in Aluminium frame incl. door frame, Call button with stainless steel cover type tested door lock with fail safety lock Door closer - installed covered Horizontal sliding doors ISO-PA 300 powered horizontal sliding doors made of primed painted steel incl. door frame, cover panel, Call button with stainless steel cover type tested door lock with fail safety lock Machine room door double hinged door galvanized with sash lock with side frames made of galvanized steel Drive unit Drive unit with standard motor IP 54 and factory-made oil-filling, double disc brake and hand wheel, 3 x 400 V 50 Hz. chain wheels for chains 5/8 x 3/8" Controller Microprocessor in controller cabinet Installation pre-installed and plug-in system Floor selector (impulse driven)
Goods lift We are engaged in manufacturing goods lift, hydraulic goods lift and industrial goods lift that is safe & easy to use and is in high demand. These are used for lifting heavy and light material which are fitted with shutters and installed with hoists, push buttons and switches. Specially designed for various industrial applications, these lifts are renowned for optimum performance and negligible maintenance. We even offer customized solutions and provide these reactors at industry leading prices. Note : we customize our capsule lifts as per the area, location & requirement of the client. Wooden
Goods lifts ISO-MAX Capacity: 300 / 500 / 750 / 1000 kg The ISO-MAX is a goods only lift with two fixed cabin areas of 1,00 x 1,40 m (capacity 300, 500, 750 and 1000 kg) or 1,275 x 1,50 m (Capacity 750 and 1000 kg) and a variable cabin height from 1,20 - 2,00 m Lift unit complies to EU-Directive for machines and has a EU-Declaration of conformity of German T_V Hanover / Sachsen-Anhalt e.V. Compared to a similar hydraulic freight elevator the ISO-MAX will offer you some significant advantages and savings: corrosion-proof self-supporting galvanized steel structure shaft pit depth 270 mm only machine room less lift accessible spaces underneath the shaft possible easy mounting steel shaft cladding deliverable (no fire protection) space saving installation - compact construction pre-assembled for easy installation no brick shaft necessary Technical information The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles Buffer 80/80 Compensation device on suspension ropes Baffle plater Cabin Cant-off system made of galvanized steel, adjustable guide shoes on both sides Special safety gear (type tested) Hinged doors manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled by T_V-authorities with side frames made of galvanized steel according to drawing door locks type-tested by T_V-authorities Machine room door double hinged door with sash lock with side frames made of galvanized steel according to drawing Drive unit Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V /50 Hz 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 Controller call and send control with 24 V, safety circuit 230 V pre-wired with plugs adjustable and time-limited despatch delay device (1-5 s) electronic overload contact acoustic arrival signal position indicator on each entrance thermal motor protection as main switch pre-wired on control panel machine room light with socket ISO-PM 1000 Capacity: 1000 kg Goods lift along directive 95/28/EG with max. 2 persons corrosion-proof self-supporting galvanized steel structure shaft pit depth 270 mm only cabin push button with send control - landing push buttons with call and send control machine room less lift accessible spaces underneath the shaft possible easy mounting steel shaft cladding deliverable (no fire protection) reducing of interference prone by setting a safety feature instead of cabin door space saving installation - compact construction pre-assembled for easy installation no brick shaft necessary Technical information The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles Buffet 80/80 Compensation device on suspension ropes Baffle plater Cabin Cant-off system made of galvanized steel, adjustable guide shoes on both sides safety light curtain cabin light - cabin ventilation type tested safety gear special pushbuttons in cabin - emergency call - emergency light - prepared for outgoing emergency call special safety gear (type tested) special cabin apron (type tested) Hinged doors manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled by T_V-authorities with side frames made of galvanized steel according to drawing door locks type-tested by T_V-authorities Maintenance room door hinged door with sash lock with side frames made of galvanized steel Drive unit Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V / 50 Hz 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 Controller Call and send control Cabin push button with send control Landing push buttons with call and send control Micro-processor technique in controller cabinet Selector with absolute encoder
Goods lifts The iso-max is a goods only lift with two fixed cabin areas of 1, 00 x 1, 40 m (capacity 300, 500, 750 and 1000 kg) or 1, 275 x 1, 50 m (capacity 750 and 1000 kg) and a variable cabin height from 1, 20 - 2, 00 m. Lift unit complies to eu-directive for machines and has a eu-declaration of conformity of german t_v hanover / sachsen-anhalt e.V. Compared to a similar hydraulic freight elevator the iso-max will offer you some significant advantages and savings: Corrosion-proof Self-supporting galvanized steel structure Shaft pit depth 270 mm only Machine room less lift Accessible spaces underneath the shaft possible Easy mounting steel shaft cladding deliverable (no fire protection) Space saving installation - compact construction Pre-assembled for easy installation No brick shaft necessary Technical information The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles Buffer 80/80 Compensation device on suspension ropes Baffle plater Cabin Cant-off system made of galvanized steel, adjustable guide shoes on both sides Special safety gear (type tested) Hinged doors Manual operated hinged doors, made of galvanized steel in accordance to din 18090, production controlled by t_v-authorities With side frames made of galvanized steel according to drawing Door locks type-tested by t_v-authorities Machine room door Double hinged door with sash lock With side frames made of galvanized steel according to drawing Drive unit Drive unit with standard motor ip 54 disc brake and hand wheel, 3 x 400 v /50 hz 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 Controller Call and send control with 24 v, safety circuit 230 v Pre-wired with plugs Adjustable and time-limited despatch delay device (1-5 s) Electronic overload contact Acoustic arrival signal Position indicator on each entrance Thermal motor protection as main switch pre-wired on control panel Machine room light with socket
Service and goods lifts All sizes available to bespoke dims.
The sundry goods ladder famous meal ladder and passes on the vegetable ladder, widely is suitable for the school, the guesthouse, the hotel, the library, the industry and commerce enterprises and institutions and in the personal villa construction. The elevator management operating mode uses outside the sedan to control, the sedan theater box uses the entire stainless steel material purification, and has the numerical code to demonstrate, on the lower level to speaks and so on luxurious decoration. First choice of for the modern comfortable life The export is the wooden crate packs
