Application:
For the production of copper flat strip, copper busbar, commutator connect, trolley contact wire, and other solid copper conductor. Widely used in the area of transformer, motor, switch, commutator manufacturer and the railway transportation, civil train tracks.
Advantages:
Feed stock can be pure copper or copper alloy
Greatly reduced the feedstock wastage, high utilization
Neither heating nor annealing process, less energy cost
One feedstock size, one process for different sizes of products
No limit on the length of the product, high product efficiency and automation
Optimized equipment design enable a less land consumption and less investment in land and its plant construction
Smooth surface, no peel and no burr defect which can completely meet the requirements of magnetic wire
Conductivity and mechanical properties are improved by hot deformation which promoted its density and crystallization
Constant quality
Both aluminum and copper flat strip production on same machine production
Twin hole die, suit for smallest strip production
We offer continuous extrusion machines from 144 kg/hr output upto 2800kg/hr output. We also offer continuous extrusion line for aluminium wire 140-220kg/hr output with product cross section of 10-100sqmm. We also additionally offer continuous extrusion machines machines aluminium tube ,wire, bus bar and also for copper alloy like CuAg,CuSn,CuMg.
Scraper is a parts of continuous extrusion machine to make busbar. We are a manufacturer of production line of copper busbar and spare parts of continuous extrusion machine. The spare parts of extrusion machine are including extrusion wheel, chamber, chamber lid, coining roller, scraper, dies, abutments (nose), side wheel, drawing dies and so on for conform extrusion machine.
Supplier: Continuous extrusion machine, extrusion wheel, chamber
Supplier: Aluminum and coppper profile extrusion machines, copper continuous extrusion machine, upward continuous casting machine, cca bus bar, edm wire cutting machine, sheet forming machine, aluminium products (pipes)
Supplier: Cartridge type dust collectors, CU-NI tube forming upcast machines, no bake sand reclamation plants, used pressure die casting machines from 800T - 2000T, continuous casting machines for copper, copper continuous extrusion machines, enameling machines, copper clad aluminium processing lines, aluminium continuous extrusion machine, continuous mixers
Extruded Plastic Teflon PTFE Tube Extrusion line (Φ150-300mm) PTFE ram extruder line is able to extrude ptfe/Teflon tube which dia from 150mm to 300mm. The automatic production line is computerize controll, which is really easy to operate. Meanwhile, the plastic Teflon extrusion machine is advance designed, high output, low energy consumption, long-life, and also our professional engineer is available to offer overseas after sale service. The extrusion machine had has continue improved in past 10 years with high quality and stable operation. PTFE machine Ram extrusion machine for Teflon PTFE Tube The China vertical PTFE RAM Extruder is designed with 2 pressure plates, so the ream is affected via a slid pressure plate. The China tube ram extruder is equipped with two hydraulic cylinders. The main cylinder serves to move the ram; the additional cylinder serves for retracting the mandrel. Base plate and dosing tray are water-cooled. The PTFE Molded powder is feed into the rotating hopper via an exact working powder dosing device, controlled by a level indicator. By means of a rotating blade the powder is wiped uniformly into the cavity of the mould. Range of diameter PTFE Extrusion 150 to 300 mm, Heating zones 5 zones The complete electrical control is laterally fastened at tube ram extrusion. With a PC touch screen panel all speeds and temperatures can be programmed. Electronics contain the necessary automatic controllers for speeds and temperatures. 4-6 temperature regulators are contained in the plant, four for the extruding ptfe and one automatic controller for a mandrel heating element. The maximum output speed of PTFE extrusion depends on: PTFE Material, outside PTFE tube diameters and PTFE product heating length. PTFE Equipment Warranty: according to our standard terms: 12months Technical Specification: PTFE Tube Extruder Dia 150mm-300mm Technical Data of PTFE machine Description Model No. Machine model PFG-300 Plastic Extruder PTFE Tube Power 25 kw Min - Max Dia 150-300 mm Tolerance 0.1-0.2mm Length Unlimited Production Per Hour 7-14kg Electricity Consumption Per hour 1.5 kw Weight of the Machine 1980 kg High of the Machine 2960 mm Floor area of the Machine 4.6 M2 Warrenty for Parts 1 Year Machine Gurantee Period 1 Year Free Spares 1 set Deliver LT 30 Days
EDM wire cutting machine
The system is capable of producing bright and long oxygen-free copper rod, copper tube, flat copper bar and other special shaped copper material from cathode copper, and the copper rod diameters are from 8mm to 30mm. Total annual capacity is from 2000 MT to 10000MT. Technical parameter of final product: Density: 8.9 g/cm3 Tensile strength: 170N/mm2 Elongation at break: >35% Conductivity of soft wire: í¦100% IACS Oxygen content: í_10ppm
We are glad to introduce our Profile Extrusion Line (Extrusion press) to you as an effective system for aluminum (alloy) profile and copper (alloy) profile (window & door profiles, industrial profiles, heat exchange, rod, tube, wire, busbar, strip etc) production. Our extrusion machine capacity starts from 300MT to 3600MT, for aluminum (alloy) and copper (alloy) production. Extrusion type: Direct extrusion, indirect extrusion, direct and indirect combined extrusion press. Pumps: Germany REXROT, Japan YUKEN, American VICKERS for your choice. With tailored design according to customerí»s specific requirement, we are confident that whatever you want, our production line can exact meet your production requirements.
