Cell Culture Flask

1.Material:PS(Polystyrene) 2.Brand:WHB 3.Sterilized by gamma irradiation 4.Dnase/Rnase and pyrogen free 5.Available with 3 different growth areas of 50ml(25cm2),250ml(75cm2),600ml(175cm2) 6.Flasks surface is flat and free from striation to maximize usable growth area 7.2 different cap styles (Seal and Breathable) can be used in both open and closed systems. 8.breathable cap have 0.2um hydrophobic menbrane,conducive to exchange gas,prevent microorganisms. 9.Innovative angled neck design offers good pipet and cell scraper access in 10.Upper triangular and wider base shape provides stability 11.Protrudent ridge on the back side of the flask makes it easy for stacking 12.Special area near the neck for easy mark writing 13.Both flask sides have engraved graduationStrict integrity tested

Introduction and features 1.Material : PS (Polystyrene) 2.Brand: WHB 3.Gamma ray sterilization 4.Dnase/Rnase and pyrogen free 5.Available with 5 different diameters of 40,60,100,110 and 150 mm 6.Clock at the bottom of dish,easy to record. 7.Thickness uniformity , flat and smooth bottom of dish ,more accurate date analysis 8.Special structural improvement patents are obtained to increase the strength of the lid and bottom, Increase the adsorption of the inner wall of the petri dish 9.TC surface treatment,cellular adherent fine 10.Toothed ring design in dish side,easy to take hold,reduce pollution 11.The inside of dish cover have bump to exchange gas 12.Stacked rings make stacking and handling easier

Introduction and features 1.Material: PS (Polystyrene) 2.Brand: WHB 3.Gamma ray sterilization 4.Dnase/Rnase and pyrogen free 5. Available with 5 different diameters of 40, 60, 100, 110 and 150 mm 6. Clock at the bottom of dish, easy to record.  7.Thickness uniformity, flat and smooth bottom of dish, more accurate date analysis 8. Special structural improvement patents are obtained to increase the strength of the lid and bottom, Increase the adsorption of the inner wall of the petri dish 9. TC surface treatment, cellular adherent fine 10. Toothed ring design in dish side, easy to take hold, reduce pollution 11. The inside of dish cover have bump to exchange gas 12. Stacked rings make stacking and handling easier

Introduction and features 1.Material:Polystryrene +Borosilicate glass 2.Brand:WHB 3.Sterilized by gamma irradiation 4.Dnase/Rnase and pyrogen free 5.Glass thickness:0.17mm +- 0.02mm 6.Available with 4 different pore size of 10,14,20,30mm 7.Borosilicate glasses is with high homogeneity, low bubble and inclusion content. 8.Medical grade shadowless glue, high transparent achromatic  9.Suitable for fluorescent microscope experiment , confocal microscopy and phase-contrast microscopic experiment , etc.  10.Suitable for all living cells' examinations 11.Subdivided version enables simultaneous multiplex analysis 12.Dish surface is smooth and free from striation to maximize usable area for growth  13. The rim on upper side of the lid mates with the dish brim for easy and secure stack  14.Lids with several little chimbs to shape vents are available for very effective gas exchange

Introduction Culture Flasks are perfect manufacture for cell growth and cell yields aim on little and medium input volume. MS« offers the selection of 4 different growth areas of 12.5, 25, 75 and 182 cm2 which are easy to open packaging, variety of flasks and assortment of caps. 2 different cap styles can be used in both open and closed systems,Plug Sealing Caps :Standard polyethylene caps can be used in closed systems, providing a liquild and gas sheer seal. But if you simply unscrew the cap one quarter of a turn, this cap can also be used in open system ;Vent Caps:Vented polyethylene caps contain a 0.228m hydrophobic filter to allow gas exchange and minimize risk of cross-contamination Feature Flask surface is flat and free from striation to maximize usable growth area innovative angled neck design offer good pipette and cell scraper access in Upper triangular and wider base shape provides stability Both flank sides have engraved graduation Strict leakage tested Certified non-pyrogenic 200/box

Introduction and features 1.Material:PS 2.Brand:WHB 3.Sterilized by gamma irradiation or EO 4.pyrogen free 5.For fungi, bacteria and other microbial culture 6.Stacking rings make stacking and handling easier 7.Ventilation point design, favorable gas exchange

Introduction and features 1.Material: PP 2.Brand: WHB 3.Sterilized by gamma irradiation 4.Available with 2 sizes of 15,50ml 5.Black or white silk screen scale, clear lines. Large white marking area. 6.Can be one-handed operation, easy-spin tube cover, good sealing. 7.The maximum can withstand 12000 xg centrifugal force 8.The temperature range is -80 ° C to 120 ° C 9.Products can be held for single or multi-tube packaging 10.Dnase/Rnase and pyrogen free

Information and feature 1.Material:LDPE 2.Long flexible stem can be bent to draw liquid from narrow or small volume tubes into the bulb 3.Offer the aspirating precision of a glass pipet and the safety benefits of plastic 4.Available with 7 length of 65,80,148,150,160,176,180mm. 5.Sterilized by gamma irradiation or EO 6.Strict consistency tested

1. Material:PP 2. Brand:WHB 3. Sterilized by gamma irradiation 4. Available for 0.2ml and 0.5ml module specifications of the PCR instrument 5. The smooth surface of the the wall ensures the effectiveness and uniformity of the heat transfer between the samples 6. The tube cover is excellent in sealing property, and the opening cover is smooth 7. Matte tube cover surface, easy to tag, easy to operate 8. Dnase/Rnase and pyrogen free