Complete integrated plants stationary, skid-mounted, wheel-mounted, crushed sand systems - to produce concrete aggregates, road-base base materials & asphalt mixes, railway track-ballast, etc. The plants are well-built for high productivity and durability
Capacity: 50 to 500 TPH
The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D. Equipment Technical Data Titer Range dtex 6.67-16.67 Spinning Pos. nos. 6-24 Spinning Pitch mm 700, 750 Plant Capacity TPD 15-80 Spinneret dia. mm 328, 358, 410 Spinning Mechanical Speed m/min 500-1,500 Spinning Processing Speed m/min 500-1,300 Stretching Mechanical Speed m/min 240 Stretching Processing Speed m/min 230 Total Tow Titer at Stretching dtex 600,000-3,000,000 Stuffer Box Width mm 160-410 Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101 Bale Weight kg 200-350 Application: Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well. Spinning Line: Continuous Dryer Hopper Screw Extruder Polymer Pipe Filter Spin Beam (Meter Pump System, Spin Pack, Spinneret) Quenching Unit Interfloor Duct Draw-off Wall Capstan Roller Sunflower Gearing Unit Automatic Fiber Can Device Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press
70 MW Wartsila Dual Fuel Power Plant This a complete plant that has Total Power:70840 K, Total Hot Water production :360 ton/h, Total Steam :35 ton/h, (6) six Wartsila Natural Gas and Dual Fuel Generator sets (4) 8730 kW Wartsila 20SV34SG Natural Gas Generator Sets, Year 2006 to 2009, 15000 to 40000 hours (2) 16650 KW Wartsila 50 DF Generator sets (Natural Gas, Light Fuel Oil & Heavy Fuel Oil) Year 2010, 11,000 running hours, 514 rpm, 50 HZ, Siemens Steam Turbine, Boilers, Cooling system, Lubricating Oil System, Control and Monitoring System, Electrical System, Transformers, Pumps, Air System, Exhaust Gas System, Compressed Air System, tanks and etc. The (2) 16650 KW Wartsila 50 DF Generator sets can be purchase separately from the rest of the plant.
Ferulic acid has a high content in traditional Chinese medicines such as Ferulic acid Angelica sinensis Chuanxiong Cimicifuga and Suanzaoren One is obtained from the combination of ferulic acid and some small molecules the second is obtained from the plant cell wall and the third is obtained through tissue culture Ferulic acid in plants is often crosslinked with polysaccharides and lignin through ester bonds or selfesterified or etherified to form di ferulic acid Generally alkaline and enzymatic methods are used to break the ester bonds to release ferulic acid and then suitable solvents are used for extraction Item Specifications Results Appearance White or lightyellow acicular crystal Passed Melting point 172 01760C 17261748C Loss on drying 050 016 Residue on ignition 010 004 Heavy metals 10PPM Passed Unspecified impurities 010 Not detected Total 050 Not detected Contents 990 1000 Conclusion Conforms
Carboxymethyl chitosan is a higher derivative of chitosan obtained by reacting chitin with chloroacetic acid under basic conditions. Compared with chitin, its physical and chemical properties are optimized, with 100% water solubility, film formation and strong heavy metal chelation. This neutral, pure natural and completely non-toxic product has shown superior characteristics in the fields of medical care, pharmaceutical industry and agriculture. At present, it has been applied in many aspects such as advanced cosmetic additives, heavy metal chelating agents, drug sustained release agents and plant growth agents. Specifications Property/ Physical Appearance: White to Light Yellow Powder/ Flakes Odour: Odourless Particle size (US Mesh): NLT 98% through 80 Mesh Appearance of the Solution: Transparent Analytical Property Carbonylation degree:â?¥80.0% Identification Infusibility: â?¤1.0% Water Content: â?¤10.0% pH Value: 8-10 Protein Content: Non Detectable Viscocity: 10mPa.s â?? 80mPa.s Heavy Metals: â?¤10ppm Arsenic: â?¤0.5ppm Microbial Total Aerobic: NMT 1000cfu/g Yeast & Mold: NMT 100 cfu/g Conform Bacteria: NMT 0.3 MPN/g E. Coli: Negative Salmonella: Negative Storage Store in tight, light resistant containers Packing 25 KG cardboard drum
Mineral Processing Equipment Chunlei Machinery has always specialized in providing process technology solutions aimed at reducing the operating costs of beneficiation plants.Chunlei Machinery designs, builds, manufactures, installs and maintains equipment across the entire value chain of beneficiation plants covering all commodity sectors, from diamonds to coal, gold, iron ore, platinum and phosphates. Leading range of cyclones, spirals, magnetic separators, flotation components, centrifuges, samplers, filter presses and slurry pumps Mineral processing equipment utilization and reducing total plant costs International operations with strong local partners providing end-to-end beneficiation solutions and services Customized on-site service and support contracts Strategic inventory of equipment and spare parts to respond quickly and efficiently to your plant needs Mineral processing is a term used by many in the mining industry to describe the separation of commercially valuable minerals from ore. The process may include a number of different systems and equipment, which should be carefully considered in order to produce the optimum output from the plant operation. Material extracted from large deposits undergoes four general types of operations: size reduction, screening or classification, chemical preparation and dewatering. Raw material processing requires the use of highly robust systems and chemical procedures designed to separate excess solids from the desired material. Several naturally occurring solid minerals such as coal, metals, industrial minerals and aggregates benefit greatly from this process. Chunlei Machinery provides mining and beneficiation technologies for mineral processing circuits, for sorting, separating and dewatering minerals, as well as water recovery and dewatering technologies for waste management. At Chunlei Machinery, we offer a wide range of mining technologies. Our approach is focused on developing site specific and cost effective beneficiation solutions for all our customers.
Activated Carbon Plant Plant Capacities : From 3MT/day to 50 MT/day, based on Rotary Kiln Technology. A brief introduction of Activated Carbon is the carbon produced by activation of any carbonaceous material such as coconut shells, bamboo, wood chips, sawdust, coal, lignite, paddy husk, etc. In the northern region of the country, Activated carbon is produced mainly from wood charcoal, whereas in the southern region including Kerala, it is made from charcoal of the shell of Coconut that is available aplenty. Shell-based activated carbon is extensively used in the process of refining and bleaching of vegetable oils and chemical solutions, water purification, recovery of solvents, recovery of gold, in gas masks for protection against toxic gases, in filters for providing adequate protection against war gases/nuclear fall outs, etc. Activated Carbon of three grades namely powder, granular and pelletised, finds hundreds of different applications. By chemical activation, predominantly powder activated carbons are made and these qualities are mostly used for wastewater treatment. Granular products and pellets used for gas purification are predominantly made by gas steam activation. The domestic market for activated carbon is fast expanding with rapid growth of several end user industries. The demand from the vegetable oil industry – the largest consumer of activated carbon, is estimated at around 30,000 tonnes. The capacity utilisation ratio is reported to be around 80% – 85%. Activated Carbon has got huge export potential due to its wide application in many industrial sectors. About 55% of value of export is contributed by U.K, South Africa, Germany and U.S.A. Other principal buyers of Indian manufactured activated carbon include Australia, Belgium, Malaysia, Japan, Sri Lanka, Netherlands, Sweden and Senegal accounting for 30% of total exports from India.
200 MW Siemens SGT-800 Gas Turbine Power Plant Three (3) Siemens SGT 800 Gas Turbines, Siemens Steam Turbine, 3000 rpm, 50HZ, Commissioned Year: 2013, Total operating Hours, 21,000, Hours ran after last inspection 2500 hrs. (3) HRSG, RMS station, HV switchyard,, electrical systems, control systems, air systems, cooling systems, compressor systems, pumps, starting system, lubricating system, fire fighting system and much more. Complete plant, can be inspected in operation.
I have for sale an SNG Plant. The Plant was used as backup for Natural Gas Supply at a large Dairy Processing Plant. Attached are photos of the Synthetic Natural Gas Plant. Below are details on the Plant Based on the liquid propane vaporising capacity of 5205 litres/hour, we calculate the following based on Propane HD-5 specification: LPG - Propane = 94.0 MJ/m3 as a gas LPG - Propane = 25.4 MJ/L as a liquid Natural Gas ~ 38.8 MJ/m3 @ HHV - 35.0 MJ/m3 @ LHV Simulated NG ~ 49.1 MJ/m3 @ HHV - 45.3 MJ/m3 @ LHV Typical SNG composition: 50% - Propane HD-5 specification 1% - Ethane 2% Butane 37% Nitrogen 10% Oxygen Equals 100% Calculation : 5205 Litres/hour propane liquid x 25.4 MJ/Litre = 132,207 MJ/h Propane gas (132.2 GJ/h) Or 3.7 Litres propane liquid = 1 m3 propane gas @ 94.0 MJ/m3. So, 5205 Litres divided by 3.7 = 1406.75 m3 @ 94.0 MJ/m3 = 132,234 MJ/h Propane Gas (132.2 GJ/h) SNG is made up of 50% Propane (HD-5 spec.) Below is information on the SNG plant. There were 3 Data plates on the plant. Morfab Company Inc Woodinville Washington 98072 M.A.W.P 250 psi at 650 degrees Fahrenheit. M.D.M.T -20 @ 250 psi Serial Number E-296 Year built 1998 Made in Germany Landis and Gyr LFL 1.335 100 â?? 110 V Serial 01 50- 60 hz /3.5VA tv 37.5s 4A, - total 5A TS max 2.5s (5s) /5s S GL DIN Rg 5 FO91/95 Sam Dick Industries Seattle Washington Model QM120 â?? 10 1999 Serial Number 99120016 Vaporising Capacity 1375 US Gallons hour (5205 litres per hour) Heat exchange surface 99 square feet Tube side 250psig at 650 degrees Fahrenheit 220 volts 50hz 1phase 21 amps The SNG Plant is available now.
Gasification Power Plant PRODUCT FEATURE 1.The gasifier uses fixed bed down-draft type, produce syn-gas continuous and stably with low tar content, it can generate electricity continuous. 2.Easy to use and operate, use Siemens PLC touch screen control panel to realize automatic control and semi-automatic control. Independent operation room, adjust parameter directly by controlling LCD touch screen. Then gen set will operate with separately control system. 3.Due to MSW gasification process adopts pyrolysis and accurate control in different stage, so it can reach specified flue gas standard. 4.Due to low temperature gasification combustion(gasifier furnace) under anaerobic condition and low temperature gasifier and combustion, only producing combustible gas, particulate matter emission is precious little. 5.Finish low temperature oxidation process in high temperature combustion chamber (combustion furnace), not producing harmful gas secondary pollution. 6.Due to combustion process is c omplete, the ash is completely non- pollution matter. 7.The removal rate of organic is over 90%, so it reduce the follow-up treatment cost greatly. 8.All kinds of waste with different composition can burn stably at the same time. 9.Safety separation combustion, restrict dioxin and other harmful matter output. 10.Operation 24 hours/day continuous. 11.Waste need to sort out, and improved operation efficency, ensure the safety of working environment. 12.Haiqi gasification system is fully closed, it is neat and beautiful look at site, no harmful to operation people. Automatic fuzzy control, easy to operate. All fuel feeding, slag discharge door, overhaul hole use soft seal, On the top of furnace has a seal cover to avoid gas leakage. The sealing of furnace is good, realizing good effect of oxygen controlling and pyrolysis. 13.When pyrolysis gas spontaneous combustion take place, then it enter into a process of spontaneous combustion, auxiliary combustion device will stop automatically. The whole process of spontaneous combustion is over 90%, greatly lower running cost. Realized resource utilization of waste thermal energy. Flue gas emission is no harmful and total CO2 emission is reduced. Gen set: the gas from biomass and MSW is syn-gas, the components of the syn-gas is special, the impurity content is too much, so Haiqi company adopts large cylinder, lower rotate speed internal combustion engine, generate electricity stably. APPLICATION SCOPE Use all kinds of agriculture waste, city waste and industry waste to generate electricity, supply to factory or connect with national grid. -
