FEP transparent corrosion-resistant separating funnel
Product characteristics:
1. It is crack resistant, transparent, anti sticking, easy to clean, moisture resistant and can completely drain water;
2. Sealed well, it can prevent the chemicals in the separating funnel from penetrating;
3. Corrosion resistance (strong acid and alkali);
4. With strong transparency, the phase interface can be clearly observed;
5. The cover and piston are leak proof, and the piston device is easy to remove and clean;
6. The funnel can be sterilized under high temperature and pressure;
7.Excellent electrical properties: low dielectric constant, dielectric loss and high dielectric strength in a wide temperature and frequency range;
8. Flame retardancy: It cannot burn in the atmosphere.
9. Chemical stability: It has good chemical stability under most exposure environments, such as heat, light and humidity.
1351 Clear glass Desiccator with porcelain plate Product Description It is a non-vacuum desiccator, and therefore has no stopcock. The sturdy glass top fits easily on the thick lip of the desiccator, and features a knob handle for removing or replacing the lid. The lips of both the lid and the desiccator itself are ground glass, and should be greased with petroleum jelly before use. In addition to helping create an air-tight seal, the grease also helps cushion the lid when it is set down in place. To help prevent damage from being set down too forcefully, the lid can be carefully slid on, or off, of the desiccator once greased. Desiccators can be used, though not exclusively, for preserving moisture-sensitive items, protecting hygroscopic or water-reacting chemicals, as well as removing traces of water from samples that need drying. There are 8 sizes available : 120 mm desiccator, 150 mm desiccator, 180 mm desiccator, 210 mm desiccator, 240 mm desiccator, 300 mm desiccator, 350 mm desiccator, 400 mm desiccator. Material: Glass Color:clear Key Product Features : 1. Removable Lid 2. Heavy duty 3. With a procelain plate 1352 Amber glass Desiccator with porcelain plate Product Description There are 8 sizes available : 120 mm desiccator, 150 mm desiccator, 180 mm desiccator, 210 mm desiccator, 240 mm desiccator, 300 mm desiccator, 350 mm desiccator, 400 mm desiccator. Material: Glass Color:amber Key Product Features : 1. Removable Lid 2. Heavy duty 3. With a procelain plate 1354 Clear glass Vacuum Desiccator with porcelain plate Product Description Desiccators are sealable enclosures containing desiccants used for preserving moisture-sensitive items such as cobalt chloride paper for another use. A common use for desiccators is to protect chemicals which are hygroscopic or which react with water from humidity. The contents of desiccators are exposed to atmospheric moisture whenever the desiccators are opened. It also requires some time to achieve a low humidity. Hence they are not appropriate for storing chemicals which react quickly or violently with atmospheric moisture such as the alkali metals; a glovebox or Schlenk-type apparatus may be more suitable for these purposes. Desiccators are sometimes used to remove traces of water from an almost-dry sample. Where a desiccator alone is unsatisfactory, the sample may be dried at elevated temperature usingAbderhalden's drying pistol. There are 7 sizes available : 150 mm desiccator, 180 mm desiccator, 210 mm desiccator, 240 mm desiccator, 300 mm desiccator, 350 mm desiccator, 400 mm desiccator. Product Features : Various specifications; Preferential price;High quality Material: Glass Color:clear
We are the largest sodium chlorite manufacturer and exporter in china , our factory manufacture solid sodium chlorite more than 6000mt and liquid sodium chlorite more than 15000mt annually, and enjoy high reputation for the product's quality, we have long time and good business relations with many famous and very big chemical distributors in the world, our products are well sold in usa, uk, italy, spain, brazil, argentina, chile, iran, turkey, pakistan, philippines, thailand etc, and enjoy very good reputation, we are confident that we are not only the largest sodium chlorite manufacturer, but also we manufacture the best quality sodium chlorite in china now. We manufacture solid sodium chlorite 80%, 82%, 90% and liquid sodium chlorite 25%, 31%, if you are interested in the product, please contact us. Thank you and best regards, Un approved steel drums
Supplier: Borosilicate tube, glass tube, laboratory glassware, lab glassware, labware, laboratory glass, scientific equipment, laboratory equipment, educational instrument, laboratory apparatus, test tubes, microscope slide, beaker, measuring cylinder, reagent bottle, volumetric flask, desiccators, boiling flask, nitrogen flask, conical flask, iodine flask, distilling flask, retort, evaporating dish, crystallizing dish, watch glass, petri culture dish, distilling tubes, many kinds of condensers, centrifuge tube, stopcock, stirrer rod, weighing bottle, gas washing bottle, drying tube, desiccator, gas generator, bell jar, alcohol lamp, mortar, pneumatic trough, reagent bottles, aspirator bottle, filtering flask, culture flask, dropping bottle, dropping pipette, specimen jar, specimen bottle, washing bottle, funnel, dropping funnel, separator funnel, measuring cylinder, graduate, volumetric flask, measuring pipette, burette, automatic burette, micro burette, extraction apparatus,
Internal Diameter: 80mm Effective evaporation area: 0.1m2 Condensing Area: 0.15m2 Feeding funnel volume: 2L (customizable) Processing flow: 0.5-4kg/H Motor power: 120W Max. Speed: 450r/min Distillates receiving: 1L (customizable) Residue receiving: 1L (customizable) Product characteristics: 1. Operating at a temperature far below the boiling point of the material, and with a short residence time of the material, is conducive to the separation of high boiling point, heat sensitive and oxidizable materials. 2. Effective removal of substances in liquids, such as organic solvents and odors, is a very effective method for liquid desolution after solvent extraction. 3. The volatile products can be selected to remove other impurities. More than two substances can be separated simultaneously by multi-stage separation. 4. Distillation has a high vacuum, which can reach below 0.1 pa. It can obtain a high vacuum inside. Molecular distillation is usually carried out at very low pressure. The material is not easily oxidized and damaged by operation. 5. Distillation liquid film is thin, heat transfer efficiency is high, the film thickness is less than 0.5 mm. 6. Molecular distillation can separate substances which are not easily separated by conventional methods. 7. There is no boiling bubbling phenomenon. Molecular distillation is free evaporation on the surface of the liquid layer. It is carried out under low pressure and there is no dissolved air in the liquid. In the distillation process, the whole liquid can not boil and there is no bubbling phenomenon. 8. Provide a variety of specifications for customer selection, suitable for customer pilot test, pilot test, if need larger evaporation area specifications can be customized according to customer requirements. 9. Physical separation method, non-toxic, harmless, pollution-free, no residue, can obtain pure and safe products. 9. The scraper system is made of PTFE material and SS316L stainless steel material, which has high corrosion resistance. 10. The feeding tank can be pre-heated and the preheating temperature can be adjusted. 11. Each interface is sealed with fluorine rubber gasket, which has good air tightness. If the customer needs corrosion resistance, it can be replaced with tetrafluoro material.
Qby series pneumatic diaphragm pump Qby series pneumatic diaphragm pump is the new transport machine driven by compressed air for various corrosive liquids and liquids with solid grain and high viscosity and volatile and flammable and toxin liquids etc. 8 specification of inlet and outlet diameter: ï?10mm3/8''15mm1/2''25mm1''40mm11/2''50mm2''65mm21/2''80mm3''100mm4''. 4 materials of pump body: aluminum alloy, cast iron, stainless steel, engineering plastic. Diaphragm materials: nbr, neoprene, fluorine plastic (viton), teflon(fep/f46)/ptfe for different medium Application fields: petroleum, chemical industry, electron, ceramic and weave etc 1. Suck peanut, pickles, tomato slurry, red sausage, chocolate, hops and syrup etc. 2. Suck paint, pigment, glue and adhesive etc. 3. Suck various glazed slurries of tile, porcelain, brick and chinaware etc. 4. Suck various milk and wad. 5. Suck various sewage.Cement slurry and mortar etc 6. Suck variousgrinding materials, corrosive agent and clean the oil dirt etc. 7. Suck various toxin and flammable or volatility liquid etc. 8. Suck various strong acid, alkali and corrosive liquids etc. 9. Be used as the front-step transmission device of the solid and liquid separation equipment. Highest temperature of various liquids is150
Mitec - 887 orbital shaker machine (micra make) Manufacturer & supplier of shaker machine in delhi mumbai assam banglore chennai kolkata and other cities. Orbital shaker offers features for your applications making it a versatile tool for your laboratory. The bench top orbital shaker is ideal for a variety of applications including cultivating micro organisms, production of basic chemicals, solvents and shaking separation funnels or other types of vessels. The orbital diameter of 35 mm. The triple bearing, brushless drive belt assembly is strong, stable, and quiet even with heavy loads. Shaking platform 18x18 inch, cap, 12 flasks. Inclusive of 12 flasks, cap 250 ml Features : • safe and easy tray fixation • orbital diameter 35 mm • speed 50 to 250 rpm • it can be used for a variety of applications. • orbital shaker is designed to operate on environmental rooms or laboratory benches for variety of operation. • platform motion is monitored independently of motor operation for added protection. • heavy gauge steel housing with epoxy coating ac motor with digital display. • provides continuous operation even in temperature from 4º c to 40ºc. • ac motor with programmable drive to control the speed from 50 to 250 rpm Equipment: brand new, micratech make, model no: mitec-887 Condition: excellent send inquiry at sales [at] micratechnologies com
CQB Series Lined FEP (F46) Magnetic Driven Pump ( Up to Q: 100m3/h ,H:32m ) Usage : it is widely used in petrochemical ,acid & alkali ,non-ferrous metal smelting,manufacturing process of pickling ,rare earth�separation ,pesticides ,due , medicine ,fuel ,paper--making ,electroplating ,electronics, turned to foil ,national defense industry ,the nuclear power industry and other industries and precious liquid , toxic liquid , and other media transmission . Model No: CQB50-32-125F