It is a volatile polydimethylcyclosiloxane, mainly composed of octamethylcyclotetrasiloxane; it is polymerized into an organosilicon polymer under acid-base catalysis, which is the basic raw material of silicone oil and silicone rubber. It can be directly used as rubber filler treatment agent and cosmetic raw material.
CAS Number:556-67-2
Melting Point: 17-18
Boiling Point:175-176
Flash point: 60
Relative Density :0.956
Application:
D4 is the most important ring body in DMC (PMX0244). This product is colorless, insoluble in water, soluble in organic solvents.
1.The basic raw material of silicone oil , silicone emulsion, silicone rubber, silicone resin and other organic silicone products.
2. Raw material of cosmetics and medicine and daily necessities, Skin Care Creams & lotions,
Sun Care Products, Shampoo & Bath oil Antiperspirants & Deodorants
Supplier: Silicone Oil, Polydimethylsiloxane, Hydroxy Terminated Silicone Fluid, Dimethyl Cyclosiloxane(DMC), Hexamethyl cyclotrisiloxane D3, Octamethyl Cyclotetrasiloxane D4, Cyclopentasiloxane D5, Cyclohexasiloxane D6, High Boiling Silicone Oil, lubricant , release agent , defoamer, medical defoamer , finishing agent, softening agent, water repellent, hand modifier
Supplier: 201 polydimethylsiloxane/methyl silicone oil, 107 oh polymer/107 rtv silicone rubber, d4 octamethyl cyclotetrasiloxane, d5 decamethyl cyclopentasiloxane, phenyl trimethicone, hydroxyl silicone oil, silicone emulsion, amino silicone oil
Synonym: RTV-107, 107 Room Temperature Vulcanized Silicone Rubber, OH-terminated polydimethylsiloxane, -Dihydroxy Polydimethylsiloxane Cas no: 70131-67-8 Viscosity: 750cst/1000cst/1500cst/2000cst/3000cst/5000cst/10000cst/20000st/80000cst Appearance: Colorless Transparent Liquid Product Features: 1. High and low temperature resistance; 2. High flash point; 3. Low freezing point (it can be chronically used in the temperature from -50 to 250 ); 4. Small viscosity-temperature coefficient; 5. Big compression ratio and low surface tendency; 6. Water-repellent and moisture resistant; Applications: High viscosity hydroxy silicone oil (107 rubber) is the main raw material of RTV mold silicone rubber, defoamer and silicone glass glue. Because of its good electrical insulation, it can be used as insulation, moisture-proof, shock-proof and heat-resistant perfusion sealing materials in electronic components and assemblies such as radios, electronic instruments and semiconductors.
Synonym: OH-terminated polydimethylsiloxane, -Dihydroxy Polydimethylsiloxane Cas no: 70131-67-8 Appearance: Colorless Transparent Liquid Product Features: 1. High and low temperature resistance 2. High flash point 3. Low freezing point (it can be chronically used in the temperature from 50 to 250 ) 4. Small viscosity-temperature coefficient 5. Big compression ratio and low surface tendency 6. Water-repellent and moisture resistant Appilication: Low viscosity hydroxy silicone oil can be used as a processing aid for silicone rubber. It can be used as an anti-structural control agent to improve the processing properties of silicone rubber. It can also be used as a fabric post-treatment agent to improve the smoothness and sewing of polyester threads, make fabric soft, smooth and elastic. At the same time, it can be used as a release treatment for high-grade paper, leather brighteners, mold release agents, etc.
Silicone Emulsion is a 60% silicone emulsion formulated with a 350cst dimethyl silicone fluid. Becuse of its non-ionic nature, it can be used in a variety of systems, such as nonionic, anionic, cationic surfactant or polymer systems without forming a complex. Appearance:Milky White Liquid Features and Benefits: Water-based emulsion of Polydimethylsiloxane (Emulsifying Silicon Oil) Ready-to-use non-ionic emulsion Good gloss and hydrophobicity Good wetting and sliding properties General-purpose release agent Excluding Alkylphenol ethoxylates (APEO) Conform to the detergent regulation Good emulsion stability at 50 C Good dilution stability, can be diluted to 2% Good freeze-thaw stability (5 cycles) Application: As ingredient in polishes, JH-0349 Emulsion is used to provide good gloss with minimum smear in both car and furniture polish formulations. Mould Release of: Rubber or plastic parts (stoppers, screw tops, bungs, etc.) Lubrication of the extruded rubber parts and conveyor belts. Textile lubricant: Yarn manufacture Sewing thread lubrication Knitwear manufacture Sewing needle lubrication Glass fabric exhaust filters
