Nb2Pc Max Phase Powder

Product Name : Mn2GaC MAX Phase Powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Mn2GaC MAX Phase Powder Cas No N/A Appreance Gray to Black Purity 99% APS 40-50m Formula Mn2GaC Product no. SCM-MX-109/22 Related Product: Mn3AlC2 MAXene Powder Mo2C MXene Powder Mo2Ga2C MAXene Powder Mo2GaC MAX Phase Powder Mo2Ti2AIC3 MAXene Powder Related Information :- Storage Conditions: Airtight Sealed, Avoid light and keep dry at room temperature. Please contact us for customization & Price inquiry Note : We supply different size ranges of MAXene/MXene, Nano/Micron Size as per the customer s requirements and also accept customization in various parameterts.

Product Name : Cr2GaN MAX Phase Powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Cr2GaN MAX Phase Powder Cas No N/A Appreance Gray to Black Purity 98% APS 40-5m Formula Cr2GaN Product no. SCM-MX-107/22 Related Product: Cr2GaC MAX Phase Powder Fe doped Ti3AlC2 MXene Hf21nc MAX Phase Powder Related Information :- Storage Conditions: Airtight Sealed, Avoid light and keep dry at room temperature. Please contact us for customization & Price inquiry

Product Name : Copper Nano powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Copper Nanoppowder Cas No 7440-50-8 Appearance Powder Purity 99.9% APS 60-70 nm (Can be Customized) Formula Cu Product no. SCM-NM-108/22 Molar Weight 63.5 Description :- The superficial conductive coating processing of metal and non-ferrous metal; Medicine append material; Capacitor materials; Raw material for bulk nanomaterial. Adopt the inert gas to make bulk copper nano composite material with powder metallurgy; Cu Nanoparticles widelly used as Catalysts; Efficacious catalyst: Copper and copper alloy nanometer, feature high efficacy and selectivity, can be used as catalyst in some reactions, e.g. carbon dioxide compound hydrogen to produce methanol. Cu Nanoparticles used as Conductive coatings; Conductive inks; Conductive slurry: The copper nanopowder can be applied to the productiion of MLCC internal electrode and other electronic components in electronic slurry for the miniaturization of microelectronic devices; The electronic size with good performance made of copper nanopowder instead of valuable metal particles cuts cost to a large extent; This technology is used to the preference of microelectronic processes; Conductive pastes; Cu Nanoparticles are high thermal conductivity materials; Nanometal Lubricant additives: Adding 0.1~0.6% of copper nanopowder to lubricant oil and lubricant grease. It will form a self-lubricating and self-repairing coating film in the frictioning surface. Related Products: Copper Ag-Coated Nanopowder / Copper Silver-Coated Nanoparticles (300nm, Ag 20%, Cu 80%) Copper (Cu) Nanopowder / Nanoparticles (Cu, 99.5%, 800 nm, metal basis) Copper (Cu) Nanoparticles / Nanopowder (Cu, 99.9%, 580 nm, metal basis) Copper (Cu) Nanopowder / Nanoparticle (Cu, 99.9%, 90-250 nm, metal basis) Copper (Cu) Nanopowder / Nanoparticle (Cu, 99.9%, 100nm, metal basis) Copper (Cu) Nanopowder / Nanoparticles (Cu, 99.9%, 70nm, metal basis) Copper (Cu) Nanopowder / Nanoparticle (Cu, 99.9%, 40 nm, metal basis) Copper (Cu) Nanopowder / Nanoparticle (Cu, Cu2O Coated, 99%, 30 nm, metal basis) Copper (Cu) Nanoparticles / Nanopowder (Cu, Partially Passivated, 99.8%, 25 nm) Copper (Cu) Nanoparticles / Nanopowder (Cu-Carbon Coated, 99.8%, 25 nm) Copper (Cu) Wire, D: 100nm, L: 15um, 99.5%) Sn-Cu Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100 nm, SN:CU/9:1 Sn-Cu Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100 nm, SN:CU/1:9 Sn-Cu Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100 nm, SN:CU/92:8 Ag-Cu Nanopowder / Nanoparticle, 99.9%,

Product Name : Chromium Nano powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Chromium Nanopowder Cas No 7440-47-3 Appearance Powder Purity 99.9% APS 60-70 nm (Can be Customized) Formula Cr Product no. SCM-NM-107/22 Molar Weight 51.9 Description :- Damp reunion will affect its dispersion performance and using effects, therefore, this product should be sealed in vacuum and stored in cool and dry room and it should not be exposure to air. In addition, the product should be avoided under stress. Cr Nanoparticles,Cr Nanoparticle,Cr Nanoparticle,Cr Nanoparticles,Cr Nanoparticles.Chromium (Cr) Nanoparticles should be gently placed and avoided violent vibration and friction. Chromium (Cr) Nanoparticles should be prevented from moisture, heat, impact and sunlight. The user must be a professional (This person must know how to use Chromium (Cr) Nanoparticles.) Related Products: Chromium Cr Powder, 99.5% (3, 5, 10, 30, 45um) Chromium Powder / Cr Powder (Cr, 99.5%, 40um, metal basis) Chromium Nanopowder / Nanoparticle (Cr, 99.9%, 35-45 nm, metal basis) Fe-Cr-Co Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100nm, Fe:Cr:Co/64:25:11 Ni-Cr-Co Nanopowder / Nanoparticle, 99.9%,

Product Name : Boron Nano powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Boron Nanopowder Cas No 7440-42-8 Appearance Black Powder Purity 99.9% APS 60-70 nm (Can be Customized) Formula B Product no. SCM-NM-102/22 Molar Weight N/A Description :- Boron is a chemical element with the symbol B and atomic number 5. In its crystalline form it is a brittle, dark, lustrous metalloid; in its amorphous form it is a brown powder. As the lightest element of the boron group it has three valence electrons for forming covalent bonds, resulting in many compounds such as boric acid, the mineral sodium borate, and the ultra-hard crystals of boron carbide and boron nitride. Boron is synthesized entirely by cosmic ray spallation and supernovae and not by stellar nucleosynthesis, so it is a low-abundance element in the Solar System and in the Earth's crust. It constitutes about 0.001 percent by weight of Earth's crust. It is concentrated on Earth by the water-solubility of its more common naturally occurring compounds, the borate minerals. These are mined industrially as evaporites, such as borax and kernite. The largest known deposits are in Turkey, the largest producer of boron minerals. Elemental boron is a metalloid that is found in small amounts in meteoroids but chemically uncombined boron is not otherwise found naturally on Earth. Industrially, the very pure element is produced with difficulty because of contamination by carbon or other elements that resist removal. Several allotropes exist: amorphous boron is a brown powder; crystalline boron is silvery to black, extremely hard (about 9.5 on the Mohs scale), and a poor electrical conductor at room temperature. The primary use of the element itself is as boron filaments with applications similar to carbon fibers in some high-strength materials. Related Product: Boron Nanoparticles (B, 99.9+%, 100nm) Boron Nanoparticles (B, 99.5+%, 500nm) Boron Nanopowder / Nanoparticles (B, 92%, 1-2um) Boron MicroPowder (B, 1-2um, 99%) Storage Conditions: Airtight Sealed, Avoid light and keep dry at room temperature. Please contact us for customization & Price inquiry Note : We supply different size ranges of MAXene/MXene, Nano/Micron, Solutions, Size as per the customer requirements and also accept customization in various parameterts.

Product Name : Ti2AIN MAXene Powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Ti2AIN MAXene Powder Cas No 60317-94-4 Appearance Black Purity 98% APS N/A Formula Ti2AIN Product no. SCM-MX-120/22 Related Product: Ti2C MXene Powder, Ti2Cdc MAX Phase Powder Ti2GaC MAX Phase Powder Ti2GaN MAX Phase Powder Ti2GeC MAX Phase Powder Related Information :- Storage Conditions: Airtight Sealed, Avoid light and keep dry at room temperature. Please contact us for customization & Price inquiry Note : We supply different size ranges of MAXene/MXene, Nano/Micron Size as per the customer requirements and also accept customization in various parameterts.

Product Name : Fe-Ni-Co Alloy Nano powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Fe-Ni-Co Alloy Nanopowder Cas No 7439-89-6 / 7440-02-0/ 7440-48-4 Appearance Powder Purity 99.9% APS 60-70 nm (Can be Customized) Formula Fe-Ni-Co Product no. SCM-NM-130/22 Description :- Fernico describe a family of metal alloys made primarily of iron, nickel and cobalt. The family includes Kovar, FerNiCo I, FerNiCo II, and Dumet. The name is made up of the chemical symbols of its constituent three elements. Dumet is a portmanteau of dual and metal, because it is a heterogeneous alloy, usually fabricated in the form of a wire with an alloy core and a copper cladding. These alloys possess the properties of electrical conductivity, minimal oxidation and formation of porous surfaces at working temperatures of glass and thermal coefficients of expansion which match glass closely. These requirements allow the alloys to be used in glass seals, such that the seal does not crack, fracture or leak with changes in temperature. Related Product : Ni-Ti 60 nm, Ni:Ti/50:50 Sn-Cu 40-100 nm, SN:CU/9:1 Sn-Cu 40-100 nm, SN:CU/1:9 Sn-Cu 40-100 nm, SN:CU/92:8 Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17 Fe-Ni 40-100 nm, Fe:Ni/5:5 Fe-Ni 40-100 nm, Fe:Ni/2:8 Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11 Cu-Zn 40nm Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/6:4 Ag-Cu Nanopowder, 99.9%,

Product Name : Cu-In-S Alloy Nanopowder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Cu-In-S Alloy Nanopowder Cas No 7440-50-8 / 7440-74-6/ 7704-34-9 Appearance Powder Purity 99% APS 60-70 nm (Can be Customized) Formula Cu-In-S Product no. SCM-NM-137/22 Description :- Cu-In-S Alloy are generally irreversible and also require high overpotentials to run. In fact, the nanoparticles have the ability to make the redox reactions reversible and to lower the overpotentials when applied to the sensors. A polyacrylamide hydrogel with copper nanoparticles inside is able to determine glucose levels in a sample added to the gel. As phenylboronic acid groups on the hydrogel polymers bind the glucose molecules, the gel becomes swollen. As a result, the copper nanoparticles move apart, changing how incident light is diffracted by the gel. As the glucose levels decrease, the color of gel changes from red to orange to yellow to green. One of the examples is a glucose sensor. With the use of copper nanoparticles, the sensor does not require any enzyme and therefore has no need to deal with enzyme degradation and denaturation. As described, depending on the level of glucose, the nanoparticles in the sensor diffract the incident light at a different angle. Consequently, the resulting diffracted light gives a different color based on the level of glucose. In fact, the nanoparticles enable the sensor to be more stable at high temperatures and varying pH, and more resistant to toxic chemicals. Moreover, using nanoparticles, native amino acids can be detected. A copper nanoparticle-plated screen-printed carbon electrode functions as a stable and effective sensing system for all 20 amino acid detection Related Product : Ni-Ti 60 nm, Ni:Ti/50:50 Sn-Cu 40-100 nm, SN:CU/9:1 Sn-Cu 40-100 nm, SN:CU/1:9 Sn-Cu 40-100 nm, SN:CU/92:8 Fe-Ni-Co 40-100nm, Fe:Ni:Co/55:28:17 Fe-Ni 40-100 nm, Fe:Ni/5:5 Fe-Ni 40-100 nm, Fe:Ni/2:8 Fe-Cr-Co 40-100nm, Fe:Cr:Co/64:25:11 Cu-Zn 40nm Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/5:5 Cu-Zn 40-100 nm, Cu:Zn/6:4 Ag-Cu Nanopowder, 99.9%,