There are total 4 series blow molding machine in tincoo machinery by now: dhs series, dhd series, dhb series, pet stretch automatic blow molding machine series. Dhs series is the 5ml-10l single-station automatic blow moulding machines; dhd series is the 5ml-10l double station blow moulding machine is different from the single station machine in that it has one additional station; dhb series is the 10l-160l single-station blow moulding machine and materials of pe, pp, and abs can be used. Maximum capacity of accumulator head can be 12l while volume of products can be 160l.
Wooden case
Stretch blow molding machine
The machine is to produce greenhouse film Film Width: 6 meter -max. 24 meters. Film thickness: 0.08-0.20mm Max. Applicable materials are: LLDPE, LDPE, EVA and adhesive etc
The machine is to produce geomembrane sheet : 1/2/3/4/5 layers; Raw material: HDPE/LDPE/LLDPE; geomembrane width:6-10 meters; geomembrane thickness: 0.3-2.0mm; quality standard: US GM 13
GYJ series extrusion machine is the special equipment of making the P fixed- end anchorage. It is light and simple operation etc, and can squeeze BFM 15P and BFM13P extruding set. Model:GYJ 500 Rated extrusion pressure:495KN Extrusion hydraulic: 63Mpa Stroke:150mm Mass:70kg. Overall dimension:760x200x200.
Supplier: Pet stretch blowing machine, extruded blow molding machine for PP/PE/PC
On the basis of absorbing foreigh advanced technology.Plastic extruding flat film stretching line is used by micro-processor control frequency conversion and silicone controlled dc etc.The main parts use foreign quality products.The line on large l/d ratio and mixing smelt section on the extruder screw for which is specially parts using quality steel, for the filter changing system we apply advanced foreign automatic filter changing structure.The heating board is changed into advanced stretching hot air oven and principal technical index of the line reach international advanced level.The line has the performance of high speed.Top yield, low energy consumption., good forming quality of the fiber dru.The structure of the line is compact with a pleasing appearance smooth running, flexible and reliable control sophisticated Diameter of screw¡¨ºo65mm
This machine uses the polypropylene(pp) or high density polyethylene(hdpe) material to produce tapes for ppwoven bags, weaving through production procedures of material heating & extruding, splitting the film into tapes.Stretching & forming tapes, and then winding on the bobbins by winding machine, finally put the bobbins with tapes on circular loom for weaving. The tape extruding & stretching machines are our, with the use of special and advanced technology, we have refored this series machine many times.Through iproving, the machine can be fit for all kinds of pp&pe material, such as 100% recycled material, powder or grain material, to produce tapes.The screw and barrel of extruder are ade of high quality 38croa1a alloy steel, the hardness is over hv950 after nitriding treatment.It has the performance of easy operation & Motor power of extruder is 18.5kw Heating power of extruder is 24kw Width of die-lip is 600mm Diameter of drum is 320mm Number of arch heating plate is 2pcs Heating power of the plate is 15kw Stretching ration is 4-7 Production capacity is 30-80kg/h Winding speed is 20-150m/min Number of winder is 100spindles System installed capacity is 98kw Normal operational capacity is 64kw Weight is 8000kg Overall dimension(j*w*h) is 23600*2500*1800mm
This machine is absorbed from international advanced technical and manufactures by ourself, which major in producing monofilament yarn by hdpe and pp material The monofilament yarn can be widely used for rope, fish-net, safe construction net, article hair, mosquito nets brushes as well as protectives nets for the cotton fields. The assembly is compacted in its structure.Ad motor is used for drawing thus a synchronous speed regulation and a single speed regulation can be achieved to meet the different parameters.The spinnerets produced by the most advance way so that the flatness and eveness of the filaments can be ensured.Stability in motion, sensitiveness in control, convenience operation, high safety and reliability. ¡êabrush monofilament ¡êaropes ¡êafishing line ¡êafishing nets ¡êavelcro monofilament ¡êamosquito nets ¡êazipper onofilament ¡êaconstruction safety nets Model is sj-ys-45 Diameter of screw¡ê¡§mm¡ê© is 45 Rotation of screw¡ê¡§r/min¡ê© is 10-50 Capacity¡ê¡§kg/h¡ê© is 20-45 Diameter of yarn¡ê¡§mm¡ê© is 0.1-0.35 Line speed¡ê¡§m/min¡ê© is 100-150 Number of spindlers is 100 Install power¡ê¡§kw¡ê© is 90 Overall dimensions¡ê¡§m¡ê© is 23*1.7*1.7
Parameter specification Jo-65jo-70jo-80jo-90 Specification/parameterdouble-shaftdouble-shaftdouble-shaftbig-shaft Pay-off typepn400-630pn400-630pn400-630pn630-800 Pay-off bobbin¬)65¬)70¬)80¬)90 Screw diameter26:1 bm type26:1 bm type26:1 bm type26:1 bm type Screw l:d120140200250 "extrusion Capacity(kg/h)"25hp30hp40hp50hp Main motor power¬)0.8-¬)1.0¬)1.5-¬)12¬)2.0-¬)20¬)3.0-¬)25 Range of wire diameter(mm)"single layer/ U shape""single layer/ U shape""single layer/ U shape""single layer/ U shape" Cooling device 250m200m200m200m Length of accumulating 5hp5hp7.5hp7.5hp Haul-off power500m/min500m/min400m/min400m/min Line speed (max)double axis/axisdouble axis/axisdouble axis/axisdouble axis/axis "take-up Type"pn500-630pn500-630pn500-630pn500-630 "take-up Bobbin"4hp4hp5hp5hp.
