Kids Gel Toothpaste
Brush up Kids Toothpaste are specially formulated for your child's first teeth with low fluoride & mild cleaning agents. Have that clean, strong teeth and fresh breath with burst of tasty flavors.
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Paint Brushes
Supplier: Packaging machinery and plants for lubricants and paints products filling
Buyer: Metal scraps, such as electric motors -AC Fridge compressors, aluminum
Ritver Powder Coating is a Italian product manufactured in Dubai UAE for Africa and Asia markets. Powder coating is categorized in: Class 1,2 and 3 (for metal intrusions- aluminium, cast iron and steel) Class 1 POLYESTER : Standard Powder Coating with upto 150 color codes as per RAL systems with a warranty of up to 20 years Class 2 EPOXY: Super Durable (for exterior and interior) for up to 45 RAL color shades Class 3 EPOXY-POLYESTER:Hyper Durable (for high end structures to protect from UV), Recommended for high rise structures, aviation and metro- locomotive industries Available in Full Gloss: 90/Gloss: 77/Semi Gloss: 35/Matt: 25/Dead Matt:15% in soft textured, standard texture and coarse finishes Product is available in 20kg packing
Ritver Powder Coating is a Italian product manufactured in Dubai UAE for Africa and Asia markets. Powder coating is categorized in: Class 1,2 and 3 (for metal intrusions- aluminium, cast iron and steel) Class 1 POLYESTER : Standard Powder Coating with upto 150 color codes as per RAL systems with a warranty of up to 20 years Class 2 EPOXY: Super Durable (for exterior and interior) for up to 45 RAL color shades Class 3 EPOXY-POLYESTER:Hyper Durable (for high end structures to protect from UV), Recommended for high rise structures, aviation and metro- locomotive industries Available in Full Gloss: 90/Gloss: 77/Semi Gloss: 35/Matt: 25/Dead Matt:15% in soft textured, standard texture and coarse finishes Product is available in 20kg packing
FEATURES Excellent Gloss & Gloss retention, excellent color / non yellowing characteristics High viscosity, medium Tg and high molecular weight / good drying and forms hard and moderately flexible film Excellent pigment wet ability and good resistance to detergents and soaps. APPLICATIONS As a decorative and quick drying paints. Industrial quality quick drying paints / as acrylic topcoat for textured paints. Road marking paints / for pavements / kerb stones / pathways. clear lacquers for PVC leather cloth / over lacquering and Metallizing / coatings for electronic equipment like TV / video and similar items. Scratch resistant protective coats and polycarbonate glazing. CHARACTERISTICS Type of Resin A composition of solution polymerization Solvent Xylene Solids 60 +/- 1% Viscosity(Gardner Tube @25o C) Z2 - Z4 Acid Value < 10 mg KOH Color (Gardner) Water white (0.1 max in Gardner) Clarity Clear COMPATIBILITY DATA Long Oil / Medium Oil / Styrenated Alkyd Incompatible polyols Limited Cellulose esters Good Chlorinated rubber Good Vinyl resin Good SOLUBILITY DATA Hydrocarbons Xylene / Toluene: Soluble Mineral Spirits Limited Alcohols Soluble Esters Soluble Ketones Limited Long Oil / Medium Oil / Styrenated Alkyd Incompatible DELIVERY FORM DETAILS (50% XYLENE) Packing: 190 Kgs / net: 200 Lit Mild Steel Drums SHELF LIFE Minimum 12 months when stored under ambient storage conditions.
Supplier: Sealants and adhesives, polysulphide sealant (gun grade)/(pouring grade), general purpose rubber sealant, urja food graded duct sealant, nexo seal weatherproof 789 silicone sealant (std. / premium grade), p u sealant, fire stop sealant, water base duct sealant, clean room sealant, non drying pest, clean cloth. (tag rag) microfiber clean cloth, acrylic sealant, under body coating, water base/bitumen base, ms 99 ( metal to metal ), high temperature sealant, low temperature sealant, sol sealer, n.c. thinner, peelable coating, nexo seal multipurpose rtv silicone sealant, heat reflective paint, masking tapes
Services: Manufacturer
These brushes are made by stapling knots of filament into pre drilled cores in lengths. The most commonly used brush patterns are staggered rows, helix or chevron patterns with parallel & spiral rows also available. can be inserted straight into pre drilled cores or can be inserted on an angle of up to 30 in both left and right hand designs. The size and thickness of the bristle will determine the overall strength of the brush.Tufted cylinder brushes are used in many industrial and commercial applications where continuous filament movement creates the proper brushing action. From cleaning conveyors to polishing fruits and vegetables, tufted cylinder brushes are an effective and inexpensive way of applying coatings or removing debris for varied surfaces and shapes. Tufted cylinder brushes may be designed for many applications from dusting and polishing to cleaning and scrubbing.For lighter work it may be preferable to open up the pitch between fill holes to create a more flexible brush. For heavy work or where greater pressure is required, the pitch between the fill holes can be closed up to give a more dense stiffer brush. Alternatively, fill materials can be made short for hard aggressive brushing or long for softer sweeping.
Supplier: Paint brushes, paint rollers, artist brush, drawing brush, sponge rollers
