Alc Abrasive Pressure Blaster

Product Application 1. Sandblasting and grinding of metal and non-metal products. 2. Architectural ceramics, special ceramics and process ceramics. 3. Coarse grinding and high-pressure cutting, wear-resistant products, as additives. 4. Resin abrasives, coated with abrasives in sandpaper, gauze and other manufacturers of raw materials. 5. Filtration media - using granular abrasive as the bottom medium of filter bed to purify drinking water or wastewater is a new type of water filtration material at home and abroad, especially suitable for non-ferrous metal mineral processing and oil drilling mud weighting agent.

White aluminum oxide F2000F1000F800F360F230 Chemical Composition% Al2O3:99.2-99.6% Fe2O3:0.04-0.08% Na2O:0.23-0.35% Physical Properties B.D:1.75-1.95g/cm3 Specific Gravity:3.95g/cm3 Mohs Hardness:9.0 Application: Ceramic filter plates,refractory Bonded abrasives and Coated abrasives Surface treatment/finishing Lapping, polishing,decorative non-skid tile, and pressure blasting. Ceramic Tiles special ceramics Fluidized Bed Furnaces and Skin / Dental Care Grinding high carbon steel, high-speed steel and chilled steel AVAILABLE SIZES:

WHITE FUSED ALU.OXIDE F230F240F280F320F360F400F500F600F800F1000F1200F1500F2000 Chemical Composition% Al2O3:99.2-99.6% Fe2O3:0.04-0.08% Na2O:0.23-0.35% Physical Properties B.D:1.75-1.95g/cm3 Specific Gravity:3.95g/cm3 Mohs Hardness:9.0 Application: Ceramic filter plates,refractory Bonded abrasives and Coated abrasives Surface treatment/finishing Lapping, polishing,decorative non-skid tile, and pressure blasting. Ceramic Tiles special ceramics Fluidized Bed Furnaces and Skin / Dental Care Grinding high carbon steel, high-speed steel and chilled steel AVAILABLE SIZES: JIS STANDARD:#8 #10 #12 #16 #20 #24 #30 #36 #46 #54 #60 #70 #80 #90 #100 #120 #150 #180 #220 #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000 FEPA STANDARD:F8 F10 F12 F14 F16 F20 F22 F24 F30 F36 F40 F46 F54 F60 F70 F80 F90 F100 F120 F150 F180 F220 F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 F2000

M28M20M14M10M7M5 White corundum Chemical Composition% Al2O3:99.2-99.6% Fe2O3:0.04-0.08% Na2O:0.23-0.35% Physical Properties B.D:1.75-1.95g/cm3 Specific Gravity:3.95g/cm3 Mohs Hardness:9.0 Application: Ceramic filter plates,refractory Bonded abrasives and Coated abrasives Surface treatment/finishing Lapping, polishing,decorative non-skid tile, and pressure blasting. Ceramic Tiles special ceramics Fluidized Bed Furnaces and Skin / Dental Care Grinding high carbon steel, high-speed steel and chilled steel AVAILABLE SIZES: JIS STANDARD:#8 #10 #12 #16 #20 #24 #30 #36 #46 #54 #60 #70 #80 #90 #100 #120 #150 #180 #220 #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000 FEPA STANDARD:F8 F10 F12 F14 F16 F20 F22 F24 F30 F36 F40 F46 F54 F60 F70 F80 F90 F100 F120 F150 F180 F220 F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 F2000 4# 3# M28 M20 M14M10M7M5

WHITE FUSED ALUMINA#240#600#1200#3000#6000 Chemical Composition% Al2O3:99.2-99.6% Fe2O3:0.04-0.08% Na2O:0.23-0.35% Physical Properties B.D:1.75-1.95g/cm3 Specific Gravity:3.95g/cm3 Mohs Hardness:9.0 Application: Ceramic filter plates,refractory Bonded abrasives and Coated abrasives Surface treatment/finishing Lapping, polishing,decorative non-skid tile, and pressure blasting. Ceramic Tiles special ceramics Fluidized Bed Furnaces and Skin / Dental Care Grinding high carbon steel, high-speed steel and chilled steel AVAILABLE SIZES: JIS STANDARD:#8 #10 #12 #16 #20 #24 #30 #36 #46 #54 #60 #70 #80 #90 #100 #120 #150 #180 #220 #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000 FEPA STANDARD:F8 F10 F12 F14 F16 F20 F22 F24 F30 F36 F40 F46 F54 F60 F70 F80 F90 F100 F120 F150 F180 F220 F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 F2000

Steel grit Product origin:china Brand name:taa Price terms:fob cif Payment terms:t/t or l/c at sight Supply ability:20, 000mt/year Steel grit is made from broken cast steel shot after heat treatment and Then is heat-treated again. Excellent material and proper heat treatment make it of high hardness, big density and compact microscopic structure, so it is of fast cutting speed, Less abrasion and flat cutting surface when cutting stone material. We can make most suitable product schemes according to the customer's Actual situation because different stone processing enterprises have Different cutting equipment, cutting speeds, cutting pressure ability to Cut granite, etc. We can supply customers with special steel sand on request, such as special Hardness, sizes and combinations of steel shot. Types available: Gp steel grit is angular when new. It rapidly rounds off in use and is Particularly suited to removing sand from casting and scaling oxides Gl steel grit, although harder than gp steel grit, loses its sharp edges During shot blasting and is particularly suited to de-scaling and Surface preparation applications Gh steel grit, having maximum hardness, always remains angular in its Operation mix. These abrasives are particularly effective in surface Treatment processes and produce a uniform, etched finish. Specifications: g12, g14, g16, g18, g25, g40, g50, g80 and g120. Product feature Chemical composition of the products: C 0.85-1.20% mn 0.60-1.20%, si 0.60-1.20%. Sf_0.05% pf_0.05%. Hardness: Steel grit(gp):46-50hrc Steel grit(gl):56-60hrc Steel grit(gh):63-65hrc Density: Steel shot: fª7.4g/cucm Microstructure: homogeneous tempered martensite and baintite.

Product Description Fused White Alumina(WA) Abrasive grains White Alumina ,a kind of high-grade refractories, was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling. It is white with the main crystal phase alpha-Al2O3.The white alumina produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Product Name White Alumina Material Aluminum oxide Al2O3 99.5% Fe2O3 0.04% Na2O 0.26% SIO2 0.02% Bulk density 1.75-1.95g/cm3 Specific Gravity 3.90g/cm3 min Mohs Hardness 9.0 Main Applications 1Bonded abrasives and Coated abrasives 2Surface treatment/finishing 3Lapping, polishing,decorative non-skid tile, and pressure blasting. 4Ceramic Tiles special ceramics 5Fluidized Bed Furnaces and Skin / Dental Care 6Grinding high carbon steel, high-speed steel and chilled steel Packing & Delivery Packing Details : 25KGS PVC BAGS+1MT BIG BAG OR 1MT BIG BAG Delivery Details :5DAYS FOR READY GOOD

Product Description Manufacturer Blasting Use White Fused Alumina White Fused Alumina ,a kind of high-grade refractories, was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling. It is white with the main crystal phase alpha-Al2O3.The white alumina produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Product Name White Fused Alumina Size F8 F10 F12 F14 F16 F20 F22 F24 F30 F36 F40 F46 F54 F60 F70 F80 F90 F100 F120 F150 F180 F220 Material Aluminum oxide Al2O3 99.5% Fe2O3 0.04% Na2O 0.26% SIO2 0.02% Bulk density 1.75-1.95g/cm3 Specific Gravity 3.90g/cm3 min Mohs Hardness 9.0 Main Applications 1Bonded abrasives and Coated abrasives 2Surface treatment/finishing 3Lapping, polishing,decorative non-skid tile, and pressure blasting. 4Ceramic Tiles special ceramics 5Fluidized Bed Furnaces and Skin / Dental Care 6Grinding high carbon steel, high-speed steel and chilled steel Packing & Delivery Packing Details : 25KGS PVC BAGS+1MT BIG BAG OR 1MT BIG BAG Delivery Details :5DAYS FOR READY GOODS

Our company has the domestic advanced production line of silicon carbide particle size sand, silicon carbide powder production line, silicon carbide ceramic products production line, Silicon carbide micro - powder channel reactor production line and related core intellectual property rights to produce different specifications of section sand, mesh sand, fine powder and ultrafine powder. Can meet the needs of different customers.With anthracite as smelting raw material, silicon carbide products have low ash content, low sulfur, low phosphorus, high calorific value, High mechanical strength, high chemical activity, high specific resistance and other characteristics, is the world's highest quality level of silicon carbide products.The product is widely used in abrasive products refractory, deoxidizer used in iron and steel bonding anti-slip materials, petrochemical, dust chemical industry and other industries.In mining metallurgy, metal, furnace, machinery, iron and steel, energy, environmental protection, electronics, semiconductor, aerospace, automobile and other industries, silicon carbide new technology in Rico optical materials, thin film materials, radiation resistance devices, high temperature pressure sensors, ultra-high pressure detectors and other fields show a wider application prospect.