Geometric characteristic data of rasching rings:
Size(mm) d*h*±smm specific area(m2/m3) void volume(m3/m3)
6 6*6*2 789 0.73
10 10*10*2 460 0.7
15 15*15*2 350 0.7
25 25*25*2.5 235 0.78
Packing in plastic bag or iron barral or carbon box
Supplier: Ceramic Micro Precision Components ,Alumina Rods, Tubes, Zirconia Sleeve, Piston Pump Plunger, Mud Pump Liner, Zirconia And Alumina Disc, Roller, Pulley Etc.
Buyer: Oil & Gas, Electronic & Electricals
Wire Drawing , General Enginering
Ceramic Processing, Mineral Process
Oem
etc
Ceramic ferrules collocate steel structures, steel plates, and welding studs to be used on constructing tall buildings, bridges, and various ferroconcrete structures. Two types: standard and through-deck; diameter: m8~m25.
Supplier: Ceramic tower packings, creamic balls raschig rings intalaox saddles
Supplier: Iranian products like carpet and rugs and kilim, pistachio, raisin, dried fruits, fresh fruits, watermelon, pepper, kiwi, melon, saffron, dates, licorice, rose products, cumin, blue salt, malayer raisin, sultana raisin, pickles, general purpose polystyrene, gpps, gypsum, lead, bitumen, ceramic, tiles, faucet, polymer, pet, tomato paste, sauce, canned fruits, canned vegetables, canned bean, canned corn, mineral water, cosmetic products, hand cream, paper tissue, toiled paper, hair color, pasta, diary products, sugar, rock candy, energybar, apple, apple chips, barberry, dried vegetables, jelly powder, dessert, cucumber, plug, receptacle, wall plug, car mat, plastic car carpet, dash mat, pvc floor liner, tool bag, trash bag, sun visor, 3d car mat, plastic tools, plastic container, plastic basket, hairpin, slipper
The three-rings and Medium-speed micro powder grinder is using the latest technological advances in grinding equipment, the three-rings and medium-speed micro powder grinder is widely used in grinding barite, limestone, kaolin, ceram, and slag, etc. Three-rings and medium-speed micro powder grinder is not different from other micro powder grinder. The three-rings and the rolling pressure ration of Medium-speed micro powder grinder is 1.2 times higher than that of the raymond grinder under the same power condition and the production output is raised to substantial degree . When a certain degree of wear of roller and ring of the Three-rings and Medium-speed micro powder is effected, The three-rings and Medium-speed micro powder is recommended to adjust the length of the spring to maintain the constant pressure between the roller and the ring. As a result, The stable output and fineness of the three-rings and Medium-speed micro powder are ensured. Models:HGM60;HGM80;HGM100 Model: HGM60 Diameter (mm): 600 Piece of roller : 15 Feed size (mm): í_10 Fineness of power (mm): 0.005 - 0.045 Capacity (kg/h): 350 - 2500 Total power (Kw): 37 Weight of main frame (with motor) (t): 5.2 Model: HGM80 Diameter (mm): 800 Piece of roller : 21 Feed size (mm): í_10 Fineness of power (mm): 0.005 - 0.045 Capacity (kg/h): 600 - 4000 Total power (Kw): 55 Weight of main frame (with motor) (t): 7 Model: HGM100 Diameter (mm): 1000 Piece of roller : 27 Feed size (mm): í_10 Fineness of power (mm): 0.005 - 0.045 Capacity (kg/h): 900 - 6000 Total power (Kw): 90 Weight of main frame (with motor) (t): 9.5 Notice: Any change of technical data shall not be advised additionally. Container, nude packs or in bulk
wire roller ú¦The wire roller (DL series) is the commonly used component for the wire passing, and it is used in the wire passing position of the coil winding machine and the textile machinery as well. The porcelain ring is trapped out of the bearing, it will rotate by the thread and wire passing on the surface of the ring. Thus the sliding friction has been converted to the static friction. But at the start and stop, in order to overcome the inertia, there will be a partial sliding friction. The difference between the usage of wire roller and ceramic ring is: there is a sliding friction between thread, wire and the surface of the ceramic ring, so it is applied for the smaller angle of the wire, lower pressure and other such kind of less demanding occasions. The wire roller is mainly used of static friction (part sliding friction); it is applied for the bigger angle of the wire, a certain pressure and other such kind of higher occasions. Recently, as improved processing technology, ceramic rings can also be used for important occasions, further illustration will be provided when orders. The surface polish degree of the porcelain ring reaches Ra0.2; the beating during rotation is under 0.15. We select the 99% AL2O3 as the material with the hardness of HRa88 and the density of 3.85. There are three types of the wire roller---wire roller (DL series), ceramic roller (NT-2 series) and the wire jump preventer (NT series). Two nylon sidewalls have been put to the both side of the ceramic ring and the bearing, it combines one wire roller. Two ceramic sidewalls have been put to the both side of the ceramic ring and bearing, there is a reverse hook or a ball to prevent the thread jumping out above the ring. The roller which is without the ceramic sidewalls is called ceramic roller. wire roller ú¦The wire roller (DL series) is the commonly used component for the wire passing, and it is used in the wire passing position of the coil winding machine and the textile machinery as well. The porcelain ring is trapped out of the bearing, it will rotate by the thread and wire passing on the surface of the ring. Thus the sliding friction has been converted to the static friction. But at the start and stop, in order to overcome the inertia, there will be a partial sliding friction. The difference between the usage of wire roller and ceramic ring is: there is a sliding friction between thread, wire and the surface of the ceramic ring, so it is applied for the smaller angle of the wire, lower pressure and other such kind of less demanding occasions. The wire roller is mainly used of static friction (part sliding friction); it is applied for the bigger angle of the wire, a certain pressure and other such kind of higher occasions. Recently, as improved processing technology, ceramic rings can also be used for important occasions, further illustration will be provided when orders. The surface polish degree of the porcelain ring reaches Ra0.2; the beating during rotation is under 0.15. We select the 99% AL2O3 as the material with the hardness of HRa88 and the density of 3.85. There are three types of the wire roller---wire roller (DL series), ceramic roller (NT-2 series) and the wire jump preventer (NT series). Two nylon sidewalls have been put to the both side of the ceramic ring and the bearing, it combines one wire roller. Two ceramic sidewalls have been put to the both side of the ceramic ring and bearing, there is a reverse hook or a ball to prevent the thread jumping out above the ring. The roller which is without the ceramic sidewalls is called ceramic roller.
Supplier: Mechanical seals, graphite gaskets and packing rings, pumps of all types, cutting tools, TC inserts, TC rings, sic rings, ceramic rings
Supplier: Welding stud, shear connector, ARC stud, headed stud, shear stud, ceramic ferrule, ceramic ring, ceramic shield, ceramic backing plate, ceramic backing tape
Welding studs collocate steel structures, steel plates, and ceramic ferrules to be used on constructing tall buildings, bridges, and various ferroconcrete structures. Diameter: m13~m22; length:50mm~250mm.