Credentie Manufacture, Exports, Supplies premium quality reprocessed Linear Low-Density Polyethylene granules abbreviated as LLDPE granules are commonly used in commodities plastic industries for various applications as mentioned below
Heavy Duty Blown Film applications
Blown Film applications
Cast Film applications
Drip Lateral Applications
Septic
Chemical Storage Tanks
Overhead & Loft Tanks & Bins
Tanks Underground & Overhead tanks with High Rigidity
Extrusion Coating in blends with LDPE
Lids
Base resin for Masterbatches
Grades
Blown/ Cast Film
Drip Lateral Tubing
Roto Molding
Extrusion Molding
Injection Molding
Unique Roto Polymers is offering the best quality LLDPE Reprocessed Plastic Granules and Pulverised Powder for Rotomoulding. The product is manufactured by using the best quality high-grade basic material procured from standard vendors in the industry, these products conform to the defined parameters of the industry requirements and prevailing market demands in the domestic as well as international markets.
Roto Polymers is offering the best quality LLDPE Virgin and Reprocessed Plastic Granules and Pulverised Powder for Rotomoulding. The product is manufactured by using the best quality high-grade basic material procured from standard vendors in the industry, these products conform to the defined parameters of the industry requirements and prevailing market demands in the domestic as well as international markets.
LLDPE Reprocessed Transparent Color For Sales MATERIAL : LLDPE reprocessed transparent color CATEGORY : LLDPE TYPE : Reprocessed GRADE : Transparent color SPECIFICATION : First grade reprocessed LLDPE natural color filled in seperate bags. LLdpe - MFI 0.92 equal to virgin film grade Natural 80MT ORIGIN : New Zealand LOADING WEIGHT : 20 Tons FAS (USD/Ton) : 1000-1200
LLDPE (Linear Low Density Polyethylene) Origin: Petrochemical Plant Grade: Film Grade Type: Off Grade Color: Natural Loading Port: Jeddah, Saudi Arabia
High density polyethylene HDPE for non-toxic, tasteless, no smelly white particles, melting point is about 130 C, relative density of 0.941 - 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, and environmental stress cracking resistance.
Unique Roto Polymers is offering the best quality LLDPE Reprocessed Plastic Granules and Pulverised Powder for Rotomoulding. The product is manufactured by using the best quality high-grade basic material procured from standard vendors in the industry, these products conform to the defined parameters of the industry requirements and prevailing market demands in the domestic as well as international markets. Features High Flame Resistance Non-Oxidising Character Long Shelf Life Durability
HDPE: HDPE cable material Property Unit Typical Value Mass density g/cm 3 0.941-0.959 Melt flow Rate(190 centidegree /2.16kg) g/10min 1.0 Tensile yield strength MPa 19.0 Flexural modulus Mpa 965 Elongation@ break % 400 Impact Embrittlement temperature centidegree MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15 Application Mainly used for the production of high toughness of the telephone,cable insulation material LDPE: Physical Properties Test Method Nominal Value Unit Density ISO 1183 0.921 g/cm3 Melt Mass-Flow Rate (MFR) ISO 1133 1.9 g/10min Hardness Shore Hardness (shore D) ISO 868 45 Mechanical Properties Tensile Modulus ISO 527-2 175 MPa Tensile Strength Yield, ISO 527-2 9.0 MPa Break, 13.0 MPa Tensile Strain(Break) ISO 527-2 850 % Modulus of Elasticity Internal Method 250 MPa Thermal Vicat Softening Temperature ISO 306/A50 89.0 �°C Melting Temperature (DSC) DIN 53765 108 �°C Peak Crystallization Temperature (DSC) DIN 53765 97.0 �°C Heat of Fusion DIN 53765 110 J/g Electrical Volume Resistivity ASTM D257 8.5E+15 ohm â?¢cm Dielectric Strength ASTM D149 30.0 kV/mm Dielectric Constant (60Hz) ASTM D150 2.20 % Dissipation Factor (60 Hz) ASTM D150 0.00050 LLDPE Properties Test conditon Test method Test data Unit Density 0.91 MFI 2 Drop impact strength ASTM D-1709 90 g Elongation ,vertical/horizontal ASTM D-882 600/800 % tensilestrength,thermal resistance ASTM D-1004 105/95 Kg/cm elongation ASTM D-638 930 % tensile strength ASTM D-638 180 tensile strength,vertical/horizontal ASTM D-882 380/350 Vicat softening point ASTM D-1525 103 C melting point ASTM D-2117 126 C Turbidity ASTM D-1009 12 % 45 glossness ASTM D-2457 75 %
Specification: Make barrel, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating. Application: HDPE (high density PE) - is used in products and packaging such as plastic bags, milk jugs, detergent bottles, margarine tubs, garbage containers, water pipes, woven bag, raincoat, polyethylene monofilament, woven yarn etc.. LDPE resins are made by high pressure autoclave process and mainly used for blown film extrusion and wire coating (cable sheath) etc.. They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams. Application Suitable for film, heavy packaging film, cable insulation materials, blow molding and foam products.
Application: DS7601 application on PP, textiles, fabrics. Composition: Polypropylene synthesis Pipe grade
