The model CSP201 diaphragm seal has been developed for use in pulp manufacturing or waste-paper processing applications. Mounting of the diaphragm seal to the measuring instrument may be made via a direct connection and for higher temperatures via
a cooling element or via a flexible capillary. Optionally, there are pipe elbows and vibration dampers available. For the material
selection Radix offers a variety of solutions, in which the upper body of the diaphragm seal and the wetted parts can be made of
identical or different materials. The wetted parts can, as an alternative, be coated.
PVC PP PVDF Diaphragm Seal For Pressure Gauge are designed to protect and isolate pressure gauges and expensive instrumentation from corrosive, high temperature, or viscous, process media. PP PVDF PVC Diaphragm Seal Features Transfers process pressure accurately without direct contact with process fluids Removes the need for expensive instrumentation Easily installed and available in three chemically resistant Materials of Construction Optional Diaphragm Materials Bottom Connection Sizes in FNPT & BSPT Female Connection Types Thermoplastic Units Rated to 240 PSIG (16 BARG) 21 C (70 F) 316L S/S Units Rated to 5800 PSIG (400 BARG) 21 C (70�°F)
Diaphragm Pressure Gauge
Supplier: Socket weld elbow, socket weld tee, socket weld coupling, socket weld cross, socket weld union, socket weld plug, socket weld bushing, socket weld cap, socket weld 90 deg elbow, tapered plug, tube plug, solid tube plug, rings, circle, drip ring, bleed ring, diaphragm seal flushing ring, flushing ring with plug, concentric flush ring, flanged flushing ring, bend fittings, hose fittings, hydraulic nipples, angle, channel, beam, tube nut, female tee, front ferrule, street tee, back ferrule, male tee, female connector , bulkhead connector, female elbow, female run tee, branch tee, foils, shim sheet, polished plates, hot rolled plates, cold rolled plates, strips,
Dial size100mm, & 150mm Accuracy11.5% and+2% of the f.s.d. ElementDiaphragm / Capsule Element materialCapsule: Brass/S.S.316 Diaphragm:S.S.316 / Teflon or Silver protected. Socket materialBrass / Stainless Steel Movement materialBrass / S.S.304/S.S.316 Lower ChamberCarbon Steel/SS 304/SS 316/ Any Spacial material (Only for diaphragm gauge) Case & BezelDie Cast Aluminium Weatherproof housing, with screwed outer bezel, stoved enamel black finish. M.S. Powder coated or 304 SS snap action bayonet type. Connection3/8M/2-BSP/NPT. T type flanges & Direct Flanges. As per ASA, ANSI, BS & DIN Standard. Flange materialCarbon Steel / SS 304 / SS 316 / any spacial material / Polyproplene/Teflon/PVC WindowGlass / Toughened Glass / safety glass Optional FeaturesSpecial graduation and range on dial, other thread connection and anti-corrosive epoxy coated black paint can be provided. Range-760 mmHg Vaccum and up to 21 Kg/sq.cm for diaphragm type " D " model & from 250mmwcUpto 10,000 mmwc for low pressure diaphragm type " LPD " model. Specifications For Compact Capsule : Dial size65mm, 100mm, 150mm Accuracy+ - 2% of f.s.d. Element CapsulePhosphor Bronze / S.S. 316 MovementBrass / S.S. 304 SocketBrass/S.S. 316 Case & BezelStainless Steel / Mild Steel with powder coated. ConnectionStandard WindowStandard Ranges60 mmWC up to 6000 m.mWC
> Process connection with flush, all welded > Diaphragm, with or without retainer flange > For highest dynamic pressures 160 bar up to 700 bar > Robust, all welded design
> Process connection with flush, all welded > Diaphragm, with or without retainer flange > For highest dynamic pressures 160 bar up to 700 bar > Robust, all welded design
The model CSP201 diaphragm seal has been developed for use in pulp manufacturing or waste-paper processing applications. Mounting of the diaphragm seal to the measuring instrument may be made via a direct connection and for higher temperatures via a cooling element or via a flexible capillary. Optionally, there are pipe elbows and vibration dampers available. For the material selection Radix offers a variety of solutions, in which the upper body of the diaphragm seal and the wetted parts can be made of identical or different materials. The wetted parts can, as an alternative, be coated.
> Process connection with flush, all welded > Diaphragm, with or without retainer flange > For highest dynamic pressures 160 bar up to 700 bar > Robust, all welded design
> Process connection with flush, all welded > Diaphragm, with or without retainer flange > For highest dynamic pressures 160 bar up to 700 bar > Robust, all welded design
