Fine Sand Recovery System
As a new type of environment-friendly equipment, the fine sand recovery system has been gradually applied to the hydropower, aggregate production line, glass raw material processing system, artificial sand making plant, recovery of coarse slime in coal preparation plants, and environmental protection engineering (mud purification, etc.). It can effectively solve the problem of fine sand recycling.
Fine Sand Recovery System Features:
1.The vibrating screen adopts polyurethane seives, which has longer service life than and does not plug holes.
2.It has high efficient fine sand recovery effect, achieving high capacity, and low power consumption.
3.It can be equipped with 1, 2 or 3 sets of hydrocyclones. Thus, it can meet the requirements of different capacity.
Working Principle :
When the fine sand recovery device works, the mixture of sand and water is transported to the hydrocyclone through the slurry pump. Then, the fine sand with eccentricity is conveyed to the vibrating screen. After dewatering, the fine sand is effectively separated from the water.Then, a small amount of fine sand and mud goes back to the washing tank through the return box.When the liquid surface of the washing tank rises, the fine sand is discharged from the discharge openning. The linear vibrating screen can recover material with concentration between 70% and 85%. Moreover, the fineness modulus can be adjusted by changing rotatation speed of the pump, concentration of the mortar, overflow water volume or replacing the mortar nozzle, so as to complete cleaning, dehydration, and classification.
LZ series sand recycling system has absorbed foreign advanced technology, and designed combined with sand field actual situation. It is widely used in mud purification, artificial sand production line, hydropower station, sand aggregate system, glass raw material processing system, coarse slime recovery, and recycle fine material. It can effectively reduce the loss amounts of fine material; solve problems of end product such as relatively high fineness modulus and relatively low stone powder content. The fine material can be recycled as high as 95%, with incomparable technical and economic advantages. Working principle Through rubber pipes sand and water mixture is extracted from cleaning tank into slurry pump. The fine sand is collected by the centrifugal force of cyclone, then fed to the polyurethane screen from the apex spray. The 0.16-3mm fine sand and water are efficiently separated through the vibration screen. The waste water will flow back to the return box, through weld chute or pipes flowing to a settling pond. Technology Advantages 1. Recycling 0.16-3mm fine sand. 2. Recycling rate reaches above 95%. 3. The water content of final sand is within 12%-15%. 4. Effectively reduce the loss of fine sand, solve the problem of sedimentation tank accumulates.
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Supplier: Deals in activated carbon powder, granular activated carbon, sawdust, wood sawdust, biomass briquettes, white coal, iron ore, laterite, spices, raw salt, refined salt, bleaching earth, mill scale, hms scrap, low ash metallurgical coke, marine gypsum, silica sand,silica flour,quartz, hematite powder, bentonite powder, china clay, quartz sand, fly ash, kaolin clay.indonesian coal, South African coal, coke fines, ground granulated blast furnace slag ,coal based activated carbon,zinc ash,zinc dust,zinc,coal dust,earthing coal,coke breeze,talc powder,dolochar,gypsum powder, plaster of pairs, aggregate, marine gypsum, gypsum powder, pop & coke fines, washed marine gypsum,quartz powder excavator
Services:
Buyer:
Supplier: Fluorspar (caf2 grades: 80% 85%, 75% 80%, 70% 75%, 65% 60% and below 60%), silica quartz (lump and fine sio2 98% 99%), silica sand (any mesh size sio2 95% 98%), magnesite (mgo 43% to 50%), manganese (mn 25% to 35%), limestone/ calcium carbonate (90% to 95%), gypsum (caco4 85% to 95%), dolomite, mica scrap, feldspar, barite (sp gravity 4.0/4.1/4.2/4.3 & basf4 87% to 90%)
LZ series sand recycling system has absorbed foreign advanced technology, and designed combined with sand field actual situation. It is widely used in mud purification, artificial sand production line, hydropower station, sand aggregate system, glass raw material processing system, coarse slime recovery, and recycle fine material. Sand recycling system will reduce the loss amounts of fine material effectively, and solve the problems of end product with high fineness modulus and low stone powder content. The fine material can be recycled as high as 95%, with incomparable technical and economic advantages. Features & Benefits 1. Recycling 0.16-3mm fine sand. 2. Recycling rate reaches above 95%. 3. The water content of final sand is within 12%-15%. 4. Effectively reduce the loss of fine sand, solve the problem of sedimentation tank accumulates.
We Export Mill Scale at most affordable prices across the country. Our skilled labour maintain the quality as per International Standards. Our Finest & Superior Quality Exist in 68% to 71% Fe. Specification: Iron (Fe) Min - 68% Silica (SiO2) Max - 3% Aluminia (Al2O3) - 0.75% Phosphorus (P) - 0.08% Sulphur (S)- 0.08% Moisture - 2%
LZ series sand recycling system has absorbed foreign advanced technology, and designed combined with sand field actual situation. It is widely used in mud purification, artificial sand production line, hydropower station, sand aggregate system, glass raw material processing system, coarse slime recovery, and recycle fine material. It can effectively reduce the loss amounts of fine material; solve problems of end product such as relatively high fineness modulus and relatively low stone powder content. The fine material can be recycled as high as 95%, with incomparable technical and economic advantages. Working principle Through rubber pipes sand and water mixture is extracted from cleaning tank into slurry pump. The fine sand is collected by the centrifugal force of cyclone, then fed to the polyurethane screen from the apex spray. The 0.16-3mm fine sand and water are efficiently separated through the vibration screen. The waste water will flow back to the return box, through weld chute or pipes flowing to a settling pond. Technology Advantages 1. Recycling 0.16-3mm fine sand. 2. Recycling rate reaches above 95%. 3. The water content of final sand is within 12%-15%. 4. Effectively reduce the loss of fine sand, solve the problem of sedimentation tank accumulates.
Introduction In last three years, we successfully make no.Sand recycling system machine as our lzzg brand, improve core technical, select new processing methods and absorb different sites working situation, we supply no.6 sand recycling system which also called as de-watering type sand recycling system. Working principle No.6 sand recycling machine, we still choose polyurethane screen as its main screening part, check its structure, we add recycling part on ts dewatering screen;sand after sand washer is fed onto polyurethane screen for dewatering waste sand water through steel chute or rubber pipe in water tank and extracted by slurry pump into high pressure sediment separator, fine sand 0.16-3mm is sprayed onto polyurethane screen also for de-watering, the waste water is back to return box and flowing out. Features 1.Sand quality is higher, lower moisture content 2.Recycled fine size 0.16-3mm sand, lower mud content 3.Compact structure and install easily 4.Sand water content can be reduced to 10-15%.
Magnesite MgO 43% to 50%
