The rod mill is decelerated and driven by the motor through the reducer and the surrounding large gear, or by the low-speed synchronous motor directly through the surrounding large gear to drive the cylinder to rotate. The cylinder body is equipped with appropriate grinding medium - steel rod. Under the action of centrifugal force and friction, the grinding medium is lifted to a certain height and falls in a throwing or discharging state. The ground material continuously enters the cylinder from the ore feeding port, is crushed by the moving grinding medium, and the product is discharged out of the machine through overflow and continuous ore feeding to carry out the next process [2].
When 80% of the product particle size is required to be less than 2.0% to 0.5mm, the rod mill is generally used. The product particle size of the rod mill is generally no more than 4.7MM and no less than 0.4mm. The ore feeding particle size of the rod mill is 80%, less than 20mm to 4mm, and the maximum ore feeding particle size can also be up to 50mm. Due to the material of the grinding rod and other reasons, the length of the grinding rod shall not exceed 6.1m, otherwise it will cause bad consequences such as disorderly rods. Therefore, the specification of the rod unloader has not exceeded specification 4.6 Ã?? 6.3m.
When the ore is fed into the rod mill, the coarse particles are at the feeding end and the fine particles are at the discharge end: therefore, the rod group cannot be completely parallel and inclined during operation, which is also a reason why the grinding rod cannot be too long.
Supplier: Mining equipments, hdpe pipes and geomembranes, industrial constructions, special vehicles. spanish ceramic tiles, electric cables and hdpe conduits. hotel equipment, as per kitchens, restaurants, industrial laundry, chemical products, irrigation material
Buyer: Chemical products.
Supplier: Fuel like diesel en590, jet fuel a1, lngg, lpg, copper cathode, a7 ingots, used rails, agri products like sugar, wheat, rice, soyabean etc, sunflower oil, valves & fasteners, spare parts for machineries. construction equipments like concrete machines, crushers, sand washing plants, material handling equipments, and construction materials, coal, diesel, machineries, tyres, generators, tyre shredder machines, fasteners, valves, epoxy, chemicals
Services: Exporter
Supplier: Liquid adblue, urea for agricultural, technical grade urea for adblue, anhydrous ammonia, base oils, lubricants, paraffin wax, labsa, rock phosphate, npk, ammonium nitrate, polypropylene, en590, jet a1, chemicals, construction materials
Supplier: Chemicals And Raw Materials, Food Products, Pulp And Paper Products, Construction Materials And Equipment, Pulse , Wheat And Barley
Swivel type lead-bronze bushed trunnion bearings are generally furnished on large diameter ball Mills. The bearing swivels are of Meehanite metal spherically turned outside and bored and faced inside to receive the removable bushing. The bushing is bored and scraped to fit the mill trunnion. The bushing is provided with end flanges thus assuring that the trunnion flanges run against a bronze face. On smaller mills rigid or swivel type bearings support the mill trunnions. The lower half of such bearings are lined with bronze or a special mill babbitt which is peened in place and bored to fit the trunnion. In all cases a low bearing pressure is maintained to assure freedom from overheating, long life and minimum maintenance. They are designed to provide support to the mill proper, its media and pulp load. Trunnion bearings are generally supplied with seals for use with a circulating oil lubrication system. They can be designed to accommodate block grease or oil with wool waste. For special applications trunnion bushings can be furnished constructed of Micarta to allow water lubrication or oil lubrication. In many dry grinding applications, or where heat is developed, the trunnion bearings can be furnished for water cooling. This system carries away the excess heat transmitted through bearings and protects them.
Vibration mill is a kind of ultra-fine grinding equipment with ball or rod as medium. Medium vibration in the mill can crush materials less than 2mm to several microns. It has the advantages of high efficiency, energy saving, space saving and uniform product particle size. It has important advantages in the field of ultra-fine grinding and has been widely used. The Palla tube type vibration mill developed in the 1970s in West Germany has entered more than 40 countries and regions around the world. From the ultra-fine grinding of industrial minerals and raw materials in the general metallurgy, building materials, non-metallic minerals, coal, chemical industry, light industry and other departments to the deep processing of new synthetic materials and magnetic materials, more than 100 kinds of materials have been processed. Classification According to the number of cylinders: single cylinder and multi cylinder; According to the excitation form, it can be divided into inertia type and eccentric rotation type; Grinding is divided into dry method and wet method according to whether water powder is added or not; According to the operation method, it is divided into intermittent type and continuous type.
Supplier: Drill rig, workover rig, oil extraction equipment, oil drilling tools, well head equipment, rig accessories, auxiliary tools, industrial chemicals
Supplier: Flour mills, dal mills, rice mills, feed mills, seeds cleaning plant, seeds processing plant, ball mills, raymond mills, dall processing plant, dust control plant, pulses processing plant, gypsum processing plant, plaster of paris making plant, single super phosphate fertilizer plant, coal burner, agricultural processing plant, mining machinery, food machinery, cleaning machinery, conveying machinery, milling machinery
Services: Turnkey project
Supplier: Detergent chemicals, mining chemicals food additives, feed chemicals, textile chemicals, leather chemicals, plastic additives, water treatment, fertilizers
Services: Export
