Galvanized Alloy Steel Casting Zinc Alloy

Galvanized alloy steel casting zinc alloy casting zinc alloy die casting parts

Dongying vast precision casting Co., Ltd specialized in casting processing with various surface treatment. We produce marine supply, glass hardware, machined parts, mechanical products, pumps, valves and other customized casting part. Casting materials mainly include stainless steel, carbon steel, alloy steel. Just send us your CAD or 3D drawing to get the one-stop tailor made service.

Architectural hardware: glass fitting, glass hardware, staircase, handrail, glass fence, pool fence, railing, glass railing, balcony railing, balustrade, glass spigot, glass clamp, glass standoff, glass spider, pipe fitting, hinge, etc.

Marine hardware: marine supply, marine hardware, marine accessory, boat accessories, boat accessory, marine accessories, marine fittings, includes anchor, cleat, bollard, drinking cup holder, fishing rod holder, hinge, base, hasp, lift handle, lock, ladder, fuel filler, air vent, deck plate, drain cover, row lock, etc.

Investment casting: casting, castings, casting part, casting parts, sand casting, aluminium casting, steel casting, precision casting, carbon steel casting, lost wax casting, stainless steel casting, etc. Like wall mount bottle opener, and other kitchen tool.

The third-generation Hastelloy alloy alloy20 is one of the more commonly used components in the C series. Due to its low nickel content, low cost, excellent mechanical and corrosion resistance, it is widely used in pump flow components where corrosion and wear coexist. The solubility of hardness in the ferrite phase reaches its maximum at 850, and as the temperature increases, the solubility increases rapidly and is much smaller than that of the austenite phase. The Cu content in c-276 has exceeded the high solubility in the ferrite phase.
The Hastelloy alloy alloy20, formed by a large amount of Ni element composition, is used in industries such as chemical engineering, pharmaceuticals, seawater, fertilizers, and other industries for projects with high corrosion resistance requirements due to its unique characteristics that lie between ferrite and austenite structures, and its resistance to intergranular corrosion. In recent years, the nuclear power industry has developed a corrosion-resistant ability in the operation of power station equipment, which cannot be replaced by other materials. Containing a large amount of Cr component, with high oxidation resistance.
The molybdenum element in stainless steel materials is only about 2%, which is far less than the molybdenum content of Hastelloy alloy alloy20. Therefore, high concentration acidity requires the use of materials well. Mainly used, it has the following corrosion resistance properties in oxidation and reduction, and excellent corrosion resistance to most corrosive media. In this oxidizing environment, such as in sulfuric acid manufacturing and solutions containing a large amount of oxidizing ions, it has excellent resistance to pitting corrosion, crevice corrosion, and stress corrosion.



Product name

ALLOY 20 STAINLESS STEEL
Thickness range

0.3mm-3.0mm,

Width range

600mm-1500mm

Length

2000mm, 2438mm, 3048mm

Size

1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required

Finish

No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint

Lead time

7 to 15 working days after the receipt

Packing

Wooden pallet or according to customer's request

Application

Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate



Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Raw melting material - aluminum scraps, cans, engine waste etc.
Output capacity - 5-30 tons/h, customized
Automation - Full automatic/ half automatic (based on output requirement and investment budget
Ingot type - ADC12 (7.5kg/ 10kg / customized)

1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift;


2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing.

Every lot of production need to do testing .


3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water.


4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500


5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.

Aluminum-zinc alloy casting
Category:Aluminum alloy casting
Aluminum-zinc alloy casting has good processing performance, and there are common grades such as AC1A and ZA43.
The mechanical properties of aluminum-zinc alloy are similar to brass, and it has good machining properties and can be processed into small metal parts. Common grades are AC1A, ZA43, etc., and the surface treatment effect is good, can adapt to a variety of electroplating processes, and has good corrosion resistance.
The mechanical properties of aluminum-zinc alloy are similar to brass, and it has good machining properties and can be processed into small metal parts. Common grades are AC1A, ZA43, etc., and the surface treatment effect is good, can adapt to a variety of electroplating processes, and has good corrosion resistance.
The aluminum-zinc alloy alloy has excellent processing performance, the overall comprehensive performance is close to that of lead brass, the surface treatment effect is good, and it has good electrical conductivity. It can be widely used in electronic and electrical industries. The lower one is added, and it is an environmentally friendly material, which can meet most environmental protection requirements.

Use of INCOLOY Alloy 825: 1. The heater is generally used in the oil refining unit; 2. Chemical plant equipment pipeline; 3. Fast cooling cylinder for solid solution used in textile industry; 4. Seamless steel pipe for heat exchanger and condenser. 5. High pressure seamless steel pipe for food (gb-2000) is a high-quality carbon structural steel and alloy steel seamless steel pipe suitable for chemical equipment and pipes with working temperature of - 40~400 �° C and working pressure of 10~30ma. 6. Seamless steel pipes for geological drilling and oil drilling control. 7. Cracking pipe for petrochemical industry is used to transport high-temperature and high-pressure fluid on fertilizer equipment.



INCOLOY Alloy 825




Standard

Food Grade Sanitary Tube: JIS G3447, KS D 3585, ASTM A270, EN 10357(DIN 11850), AS 1528.1, ISO 2037(NF A49-249)

Heat exchanger tube: ASTM A249 / ASME SA249, GB / T 24593-2009, HG 20537.2

Industrial pipe: ASTM A312, EN 10217-7, GB / T 12771-2008, HG 20537.3

Drinking water tube: GB / T 19228

Mechanical tube: ASTM A554, EN 10296-2

Size

Outer Diameter Range: 9.5~2000mm
Thickness Range: 0.5~20mm (Size can be customized.)
Length: Up to 11.8 meters per piece.

Shape Section

Round, square, rectangular





Usage

Sanitary tubing: for food processing industry, beverage industry, sugar mill and so on;

Heat exchanger tube: condenser, boiler, super heater, evaporator and so on;

Industiral pipe: for petroleum delivery, gas delivery, petrochemical industry, wastewater treatment, drainage system, and so on;

Mechanical tube: handrail, railings, balustrade, hence and so on.



Features:
1.Our stainless steel tubes pipes are treated by bright annealing, inside weld bead removing, precise polishing. The roughness of tubes could be under 0.3�¼m.

2.We have the non destructive testing ( NDT ), eg. online eddy current inspection and hydraulic or airtightness testing.

3. Thick welding, good appearance.The mechanical properties of tube could be tested.

4. And Our tubes are certificated by AD 2000-W0, PED 2014/68/EU, ISO 9001 : 2015.

5. Full material traceability is guaranteed during the manufacturing process.

6. Polished tube is supplied in individual plastic sleeves with capped ends ensuring optimum cleanliness.

7. Internal Bore: Tubes have a smooth, clean and crevice free bore.

We also have interest in selling Bulk Ferro Alloys and especially Low/Medium Carbon Silico Manganese and we are already exporting these product/s. We have tied up with a manufacturer bin , Bhutan to sell their products.

Products are:-

Low Carbon Silico Manganese. Typical Specifications are:

Mn: 55 % Minimum
Si: 25-28%
C: 0.2% Maximum
P: 0.15% Maximum
Size: 10-150 MM (90%)

Medium Carbon Silico Manganese. Typical Specifications are: -

Mn: 55%-60%
Si: 22%-25% Max
C: 0.5% Max
Si: 0.05% Max
P: 0.2%-0.40%
Size: 10-150 MM (90%)

For sure, we will be able to meet the requirements, once we get your reply

We offer a wide plethora of Zinc in many forms including LME registered
and non registered Special High Grade Ingots and Jumbos, cathodes,
dust, foil, granules, powder, pieces, anodize activated powder, shot,
and a mossy form.
Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is
malleable at 100 to 150°C. It is a reasonable conductor of electricity, and burns in air
at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc
on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.

Carbon Steel Wire Rod, Bright, Hex, Round, Flat, Hexagon, Triangle, Square Bar :: ASTM / ASME A 105.

Alloy Steel Wire Rod, Bright, Hex, Round, Flat, Hexagon, Triangle, Square Bar :: ASTM / ASME A 182 GR F 5, F 9 , F 11 , F 12 , F 22 , F 91. ASTM / ASME A 729 GR B 11 & B 22.

Nickel-based shape memory alloy casting
Category:Nickel alloy casting
Nickel-based shape memory alloy casting is mainly used in aerospace and biomedical fields. Common grades are N06600 etc.
Nickel-based shape memory alloy casting usually uses a vacuum induction furnace to smelt the master alloy to ensure the composition and control the gas and impurity content.Shape memory alloys are made of springs and other devices, and can also be used as fire prevention devices. It can also be used in various sensors.
Nickel-based shape memory alloys usually refer to nickel-titanium alloys. By changing the proportion of titanium in the alloy, the recovery temperature of the alloy can be different. Because of the characteristics of shape memory alloys, it is widely used in the fields of aerospace and biomedicine. important role.
Shape memory alloys have a shape memory effect, which can restore the shape before deformation at a specific temperature. At present, it plays an important role in the aerospace field and is used as an interface sealing function in pipeline transportation. In addition, it also plays a role in medicine, and can be used as artificial bones, spectacle frames and so on.