Gimbal Expansion Joint

Hinged Gimbal type expansion joints are also called Angular Expansion joints or Dilatation&Earhquake Expansion joints. Gimbal type expansion joint absorbs the movements in three dimension has ability to absorb large movements. These expansion joitns are designed according to EJMA standards. Flange connection, Weld Neck connection and Grooved connection types are available. Gimbal type expansion joints are designed from DN25(1") to DN1000 (40").

Expansion joint,Expansion joint Supplier Size : DN50~DN1000  Pressure : Max 4.0 Mpa  Bellows : Carbon Steel / Stainless Steel  Other parts : Carbon Steel / Stainless Steel

Expansion joint Expansion joint can also be called pipe expansion joint, compensator, expansion. Expansion joint is divided into: corrugated expansion joint, sleeve expansion joint, square natural compensation expansion joint and other major types, 1. Compensation for expansion deformation caused by heating of absorption pipeline in axial, lateral and angular directions. 2. Absorb equipment vibration to reduce the influence of equipment vibration on pipeline. 3. The amount of deformation of pipelines by absorbing earthquake and subsidence. Because of the heat expansion and cold contraction of the pipe, so for the pipe, it is necessary to produce the stress and push tension of the pipe wall; The stress on the wall of the pipe affects the strength of the pipe, and the push and pull force increases. The fixed bracket of the pipe should be made large to withstand the push and pull force generated by the pipe expansion. Therefore, the variable opening method compensated by the ductile iron pipe mechanical joint fittings is used to reduce the stress and thrust of the pipe wall. The expansion joint is mainly used to compensate the expansion deformation caused by the temperature change of the pipeline, and also to compensate the length of the pipeline due to the installation and adjustment. It is mainly divided into three structural forms: wholesale elbow expansion joint, bellows expansion joint and casing expansion joint.

Product Features of Rubber Expansion Joint To provide stress relief in ducting system by absorbing any difference in dimension caused by thermal change. To protect equipment by reducing equipment vibration. To provide simple connection of misaligned pipes. Accommodate expansion and contraction movement in axial, lateral and angular direction. Prevent the propagation of electricity Dampen sound transmission Materials Rubber : Neoprene, Nitrile, EPDM, Natural, Butyl, Hypalon, Silicone, SBR, Flurocarbon rubber Fabrics : Canvas, Rayan, Polyester, Nylon, Glass Fabric Metal Flanges : Stainless Steel, MS, Aluminium Type, Size and Pressure Rating Type : Single arch type, multi arch type, sleeve, Joint type, Enlarge Flange type, wide arch type. Size : 50 to 3000 mm Pressure (base on dia) : Upto 25 kg/cm2 Permissible movement : Axial (compression) - upto 200 mm Axial (elongation) - upto 75 mm Transverse - upto 75 mm Face to Face length : 50 to 700 mm

PE (Polyethylene) Expansion Joint Filler Board is a pre-moulded, high performance joint filler board. It has a closed cell and cross linked structure. It has an excellent recovery of 95% (after compression upto 50% of original thickness), which makes it the most suitable product for the said usage. It is an exclusive product specially designed to be used as expansion joint filler in concrete, brick, block work and isolation joints. It is also rot free and has no bitumen. What are the features and advantages of filler board? Resilient â?? Our EJF boards delivers 95% compression recovery after deflection (compression), that it is the most important and excellent attribute for any expansion joint filler boards. Weathering Effect â?? Joint filler board is resilient and additionally absolutely does not distort under less load transfer from wet concrete. Closed cellular composition â?? Very low water absorption consequently non deteriorating and also resilient Bitumen free â?? Non-staining and easy to apply. Chemically Resistant â?? to almost all types of acids, alkalies and hydrocarbon group materials. Simple â?? Easy to handle, carry, load/unload, install. Load absorption is higher and transfers to the structures very little. What is the use of filler board? Expansion joints at airport runways and taxi tracks The next usage are in mall parking lots as well as structures Furthermore these are applied to Isolation Joints to infill sections In addition to water-proofing also used in concrete flooring. Water retaining as well as water eliminating structures Inter-connecting pathways between buildings Basements, flyovers as well as subways. These kind of boards used in concrete roads as well as toll plaza flooring. Bridges, verandas, abutments and pier hinge joints For more details please visit: https://www.kampun.com/expansion-joint-filler-boards-kampun-hd100-board/

The auto punch bellow forming machine is divided into several ranges: DN100-1200mm, DN100-1600mm, DN1500-5000, customized. Auto expansion joint machine adopts our patent technology of rotating salver and the cones retract system; FUGE bellow forming machines use Siemens PLC and German Balluff sensors and servo motors to be more precise; the punch bellow forming machine owns 3 working positions and can form 3 bellows at the same time. The mechanical expansion joint forming machine is powerful enough for multiple layers of bellow and different materials, such as SS, Inconel.

Type: Single Type, Double Type, BSP/NPT Thread Type Size Range: DN25-DN1600 Material of Rubber ball: CR, NBR, EPDM, HYPALON, VITON Material of flange: Galvanized Steel, Stainless Steel Working temperature: -20â?? to +115â?? Ball length for Single Sphere: 130mm, 150mm, 95mm-300mm Ball length for Double Sphere: 175mm-345mm Ball length for Union Type: 200mm for DN15-DN50, 240mm for DN65-DN80. Thread End Connection: BSP or NPT thread Flange End Connection: EN1092-1 PN10/PN16, ANSI150, BS4504, AS2129 Table D/E. Working Pressure: PN6, PN10, PN16, PN25 Application: water, warm water, seawater, weak acids, alkalis, etc... Easy installation and remove; absorbs vibration, noise and shock -

Types: Single Sphere, double-sphere; Flange Type, Union Type Flange drilling: ANSI class 125/150, DIN PN 10/PN16, JIS 5K/10K Working pressure: 1.6mPa (16 kgf/cm2) Working degree: -15 to +115 degrees Celsius Working medium: Vapour, compressed air, cold & hot water, seawater, oil, weak acid, alkali Material list: Body: Neoprene, EPDM, NBR Lining: Chinlon Cord Fabrics Frame: Hard Steel Wires Flange: Carbon Steel.

Parts Standard Material Flanges Carbon Steel Tube EPDM, NBR, NR, PTFE Size 2"-12" Packaging Details Inner plastic film, outer carton case or wooden case