Radial Drilling Machines

Mechanical transmission Mechanical clamping Mechanical speed Automatic take-off and landing Automatic feed SPECIFICATIONGS ZQ3050++-16 Max.drilling dia(mm) 50 Distance from spindle nose to table surface(mm) 260-1150 Distance between spindle axis and column surface(mm) 360-1600 Spindle travel (mm) 220 Spindle Cone 5 Spinde speeds range(r.p.m) 78++++ 135++++240++++350++++590++++1100 Spinde speed step 6 Spinde feeding range(r.p.m) 0.10-0.56 Spinde feeding step 6 Rocker rotary angle 360 Main motor power(KW) 4 Movements motor power(KW) 1.5 N.W/G.W(Kg) 2800 Overall dimensions(mm) 2170++-950++-2450.

Model Z3032 x 7 Drilling capacityú¿mm) 32 Max.tapping dia.(mm) M16 Distance spindle axis to column generating line(mm) 300-700 Columm diameterú¿mmú¬ 150 Spindle taper MT3 Spindle travelú¿mm) 150 Spindle speed range(50Hz)(RíñPíñM) 100-1600 Spindle speed serier 8 Rotary angle of rocker in hirizontable plane(íp) 360 Distance between spindle nose to working(mm) spindle of base(mm) 275-680 Dimension of worktableú¿mmú¬ 250í-250í-250 Dimension of baseú¿mmú¬ 1050í-550í-120 Motor(kw) 0.75 or 1.1 N.G./G.W.(kg) 380/475 Packing dimension(cm) 122í-61í-138 In cartons or wooden cases The dimension is 122X61X138mm

25 To 38 mm Universal Radial Drill Machine Specification Model Drilling Capacity (in Mild Steel) 25 mm Pillar Diameter 125 mm Spindle nose to table distance 410 mm Spindle nose to base distance 660 mm Distance from Spindle centre to Pillar face 670 mm Taper in Spindle MT.3 Number of Speed 8 Speed Range of Speed 90 to 2300 RPM Table Size 250 x 200 x 200 mm Base Size (Machined Area) 500 x 600 mm Overall Base Size 925 x 600 mm Spindle Travel 220 mm Pillar Length 1220 mm Overall height with pulley Guard 1425 mm V. Belt Section B. 43" & A. 23" Weight (Approx) 500 Kgs Motor 1440 RPM 3 Phase 440 Volts 1 HP & 0.5 HP

Feature 1. ííThe spindle speed and feed change are affected by their eparate machine levers, and therefore easily and accurately conrtrolled. 2. ííThe cutting depth is controlled by the drill depth stop. Thus the drill can automatically stop. 3. ííThe spindle head and the arm as well as column are reliable clamped by means of clamping mechanism, which makes easy maintenance possible. 4. ííThe spindle head movement and the arm rotationg are light and quickíú 5. ííThe arm is raised and lowered by a couple of gears. The arm elevating unit is provided with mechinical and eletrical safety. 6.ííThe guideways of the arm, the outer and inner cloumns are wear-resistant for long service life.

DRILLING (M.S) 50 DRILLING (C.I) 60 BORING 80 TAPPING (M.S) 25 TAPPING (C.I) 30 DRILLING HEAD SPINDLE NOSE MT-5 SPINDLE NOS OUTSIDE DIA-METER 80 SPINDLE SLIVE DIA-METER 85 TRAVEL OF SPINDLE 240 NO SPINDLE SPEED â?? MIN/MAX 10 30-1500 NO POWER FEED 6 RANGE OF POWER FEEDS 0.08-0.6 POWER DRILLING HEAD 5 - HP MOTOR 1440 â?? 2800 RPM ELEVATING MOTOR FOR ARM 2-HP 1440 â?? RPM HYDRAULIC CLAMPING MOTOR -------- WORKING RANGE COLUMN DIAMETER 300 DIST. FROM SPINDLE TO BASE MIN/MAX 300x1200 DIST FROM COLUMN TO CENTER MIN/MAX 450x1250 DRILLING HEAD TRAVELS 680 DRILLING RADIUS 400x1400 TRAVELS OF ARM 900 BASE PLATE HEIGHT OF BASE PLATE 200 WORKING SURFACE 700x1100 NUMBER OF T-SLOT 3 WIDTH OF CAST SIDE 20 MM OVER ALL DIMENSION (L*W*H) 1790x1000x2300 WEIGHT APPROXIMATE 3000 KG.

Drilling cap. In Steel 40mm Drilling cap. C. I. 45mm Tapping in M. S. 30mm Spindle center to col. 890 / 387 mm Spindle travel 235 mm Spindle nose to base 900 / 185 mm Dia. of column 165 mm Dia. of RAM 72 mm Size of table 380 x 280 x 275 mm Overall base size 1270 x 745 x 200 mm No. of spindle speed (8 speed) 90 to 2630 RPM Taper in spindle base MT-4 Machine area of base 1200 x 605 mm Drill motor (gear drive) 1.5 HP & 1 HP Total height 1900 V-Belt size A-24, B-46 Net Weight 890 Kgs

40 mm capacity Radial type Drilling machine (Back Geared Drive) with S.G.I Steel Gears, Molded Coolant Tank in Base and fully Oil bath Lifting Gear box. With 2 Electric Motor, 2 R/F Switch and 2 V-Belts. With Box Table. Drilling Capacity 40 mm In Mild Steel Drilling Capacity 45mm in Cast Iron Tapping Capacity 25mm in Mild Steel Tapping Capacity 30mm in Cast Iron SGI Steel Gears Heavier than ordinary Cast Iron Gears. Spindle Tapper MT-4 Dia. of Ram 78 mm Dia. of Column 165 mm Spindle Travel 260 mm Working Area of Base 870 x 760 mm Machine Base LxBxH 1290 x 760 x 190 mm Max. Min. Distance Spindle Nose to base 925 mm to 230 mm Max. Min. Distance Spindle center to column 875 x 360 mm

25mm capacity Radial Drilling Machine. Max. Drilling Capacity in Mild Steel (MS) 25mm Max. Drilling Capacity in Cast Iron (CI) 30mm Max. Drilling Stroke/Spindle Travel 225mm

Mechanical transmission Electricity clamping Mechanical speed Automatic take-off and landing Automatic feed. Specificationgs z3050f+16/ii Max.Drilling dia(mm) 50 Distance from spindle nose to table surface(mm) 260-1050 Distance between spindle axis and column surface(mm) 360-1600 Spindle travel (mm) 220 Spindle cone 5 Spinde speeds range(r.P.M) 78f= 135f=240f=350f=590f=1100 Spinde speed step 6 Spinde feeding range(r.P.M) 0.10-0.56 Spinde feeding step 3 Rocker rotary angle 360 Main motor power(kw) 4 Movements motor power(kw) 1.5 N.W/g.W(kg) 2800 Overall dimensions(mm) 2170f+950f+2450 .