Foaming Agent

FA-3 Foaming Agent Product Description 1. Technical Parameter Type FA-3 Appearance Dark Brownish viscous Liquid Density 1.045kg/L PH Value 7�±0.5 Fomaldehyde 0 Half Consumption Rate 95 minutes Foam Density 35g/L 2. Performance and Features a) FA-3 is compounded by a wide range of active components. b) Closed-cell, dry and stable c) Hydrophobic d) Evenly dispersed porous foam concrete, e) 1 liter FA-3 can generate 800 liters foam. f) Non-perishable, not harmful, slight odor. Applicable for all kinds of cement g) Not flammable, no chemical/toxic emission 3. Use: This foaming agent is viscous and concentrated liquid. It must be diluted with 30 times water before using. FA-3 does not generate satisfactory result without a foam generator. 4. Storage: cool place 5. Packing: 200kg/drum, MOQ: 1 Ton

known to be the best thermal, fire-resisting, sound-proof insulator, used for ceiling, roofs, walls, partitions, roads, water and petroleum tanks, whether underground, or on the surface, etc. a light-weight cellular foam concrete made of fine sand, cement, water, and a special chemical which causes air cells to spread evenly. This resulting mixture can be prepared mechanically on the spot, and to the requested density. can be produced at several densities varying between 300 Kg. and 1400 Kg/cu.m. (between 19 lbs. and 90 lbs./cu.ft.) to which corresponds a variation of mechanical resistance, as well as thermal conductivity

Magnesium cement has low alkaline (PH 8-9). Large chloride content, large modifier content, fast consolidation characteristics. Magnesium cement needs foaming agent adaptive to low alkalinity, chloride-resistant, not effected by modifier, as well as large output. Magnesium Oxide foaming agent is developed to meet magnesium cement characteristics. Water Diluent: 30 times Output: 1L Magnesium Oxide foaming agent generates 800-1000L foam. PH: 8-9 Density: 1.05 Color: light brownish liquid Packing: 200kg/barrel, 1000kg/barrel Storage: 12 months. Cool place, no direct sun Application: fireproof door, door fill-in, light weight Magnesium Oxide wall board.

SN- Defoamer 577 (Anti Foaming Agents) is liquid foam breaking/ anti- foaming agent for paper making process and shows good anti- foaming ability and foam breaking ability => SN- Defoamer 577 has excellent foam breaking ability at wide range of temperature (10-45°C) => SN- Defoamer 577 has little or no effect on size fastness

AC Foaming agent , azodicarbonamide chemical name, English name Azobisformamide or Azodicarbonamide, ABFA, ADCA. AC blowing agent is one of the most commonly used in the rubber industry blowing agent, when it exploded releasing N2, CO2 and small amounts of NH3, residue decomposition is white and odorless decomposition. AC blowing agent not combustion, there is self-extinguishing, non-toxic, soluble in alkaline solution, not soluble in common solvents. AC Foaming Agent has good stability, non-combustion and self-extinguishing. It should be placed in a dry, well-ventilated place, away from heat, open flame. Processing establishments should be well ventilated to avoid inhaling dust andprolonged contact with the skin. Applications: AC Foaming agent is widely used foamed polymer also applies to polyethylene, polystyrene, ABS resin foam plastic. With this foaming agent to obtain a uniform, fine cell structure, the products feel comfortable, good elasticity, leather and strong sense of superiority. It can be used to make tool handles, furniture, auto parts, leather obturator, flooring, seals and soles.

N-Pentane 95% N-Pentane 99% Mixed Pentane (Common Index Ration)80:20 70:30 60:40 50:50 Specially:we can mixed N-pentane and Iso-pentane as per customer requirement. Company Profile: Occupied 80 percentage market in China,and supplier to the Internationg Enterprise as SABIC ,etc. Packaging:Iso tank

MJ-EP77/11 Product Description MJ-EP77/11 is a highly efficient and stable foaming agent, commonly used in water borne polyurethane resins and water borne synthetic leather, to soften the artificial leather or polyurethane coating after curing. Product Characteristics Fast foaming speed with high efficiency, can reach as low as 200 g/ L foam density (about five times the foaming rate); Fine, smooth and even foam with high stability; It can withstand more stringent process conditions, especially in higher drying temperature, to make applied products not prone to cracking or produce other surface defects; Adapted to a wide range of pH and salinity, and is not affected by water hardness; Compared with other commercially available ionic foaming agent, MJ-EP77/11 has a higher molecular weight and significantly reduces the probability of migration in the finished product. Typical Properties Appearance: White to light yellow opaque paste PH 1%, Aq.sol,20 6 Product Application The recommended dosage of the product is 2-8% (per 100 parts PUD), but it depends on the type of water borne resin and customer specific formulation. It is recommended to add MJ-EP77/11 before mechanical foaming, which has a certain thickening effect on foam, so the ideal viscosity range can be achieved by reducing or even without using thickening agent. Packaging Information 50KG/drum Shelf Life One year under normal temperature sealed package Storage Recommendations This product does not belong to hazardous goods and is not flammable. Store sealed in a cool, ventilated and dry indoor place. The container should be strictly sealed after each use.

MJ-EP77/11 Product Description MJ-EP77/11 is a highly efficient and stable foaming agent, commonly used in water borne polyurethane resins and water borne synthetic leather, to soften the artificial leather or polyurethane coating after curing. Product Characteristics Fast foaming speed with high efficiency, can reach as low as 200 g/ L foam density (about five times the foaming rate); Fine, smooth and even foam with high stability; It can withstand more stringent process conditions, especially in higher drying temperature, to make applied products not prone to cracking or produce other surface defects; Adapted to a wide range of pH and salinity, and is not affected by water hardness; Compared with other commercially available ionic foaming agent, MJ-EP77/11 has a higher molecular weight and significantly reduces the probability of migration in the finished product. Typical Properties Appearance: White to light yellow opaque paste PH 1%, Aq.sol,20 6 Product Application The recommended dosage of the product is 2-8% (per 100 parts PUD), but it depends on the type of water borne resin and customers specific formulation. It is recommended to add MJ-EP77/11 before mechanical foaming, which has a certain thickening effect on foam, so the ideal viscosity range can be achieved by reducing or even without using thickening agent. Packaging Information 50KG/drum   Shelf Life One year under normal temperature sealed package Storage Recommendations This product does not belong to hazardous goods and is not flammable. Store sealed in a cool, ventilated and dry indoor place. The container should be strictly sealed after each use.