Shovel Plate Ledge

Supplier: Non sparking tools, strikng wrench, slogging spanner, hammer, shovel, tools set, pliers, screwdrivers, testing plate, socket, wrench, spanner, axe, file
Buyer: Hand tools

String box wrench, slogging ring spanner Material: carbon steel Standard: din7444 Size:17mm, 19mm, 22mm, 24mm, 27mm, 30mm, 32mm, 34mm, 36mm, 38mm, 41mm, , 46mm, 50mm, 51mm, 55mm, 60mm, 65mm, , 70mm, 75mm, 80mm, 85mm, 90mm, 95mm, , 100mm, 105mm, 110mm, 120mm, 115mm, , 125mm, 130mm, 135mm, 140mm, 145mm, , 150mm, 155mm, 160mm, 165mm, 170mm, , 175mm, 180mm, 185mm, 190mm, 195mm, , 200mm, 210mm. All products are passed iso9001/ukas. Plastic bags, carton.

Bean dregs dryer mainly consists of the heat source(hot blast stove or gas producer furnace), material feeder(beater), rotary drying roller, discharger, induced draft fan, driving device, unloader, and power distribution cabinet. After a certain degree of dehydration and scattering, wet bean dregs enters into the drying roller through the material feeder. Under the stirring of the lifting plates and shoveling plates that distribute evenly inside the roller, the bean dregs scatter evenly and contacts with hot air sufficiently in the drying area. This speeds up the drying heat transfer and mass transfer. Wet air is pumped by air-inducing device, which avoids material from being wet again.

Product Description Bean dregs, the by-product of producing soy milk or tofu, is a kind of material with big water and oil combining performance. After being processed, it has the following advantages: fresh bean dregs' water content is about 90%, its nutritional ingredient is higher than many inferior dregs; the crude protein content is high, especially in hot summer and high temperature, it is easily rotted and mildewed. Dry bean dregs' crude protein content is three times higher than that of the unhulled rice. It is suitable for nutrition feed for pig, chicken, duck, etc. Bean dregs dryer mainly consists of the heat source(hot blast stove or gas producer furnace), material feeder(beater), rotary drying roller, discharger, induced draft fan, driving device, unloader, and power distribution cabinet. After a certain degree of dehydration and scattering, wet bean dregs enters into the drying roller through the material feeder. Under the stirring of the lifting plates and shoveling plates that distribute evenly inside the roller, the bean dregs scatter evenly and contacts with hot air sufficiently in the drying area. This speeds up the drying heat transfer and mass transfer. Wet air is pumped by air-inducing device, which avoids material from being wet again.

Sand dryer is also known as the three layers of drum dryer, three return cylinder dryers, on the basis of the single-cylinder dryer, developed and manufactured, which is an industrial dryer on non-viscous, liquid material. At present three-cylinder dryer made by Dingli company, with mature technology, through the drying of the sand, fly ash, coal, mineral materials, slag and other material, the effect is very good. Principle The sand is conveyed to silo by belt conveyor or bucket elevator, and transport to the feed end by the feeder of the silo. The inclination of the feeding pipeline should exceed the natural inclination of materials so that to facilitate sand flowing into the dryer smoothly. The rotating cylinder of the dryer is slightly inclined to the horizon. To feed the material from the higher end and the heat carrier enter from the lower end, such produce adverse contact between them .sometimes, they can be fed to the cylinder together. As the cylinder running, the sand carried to the lower side by gravity. In the process of moving forward, the wet raw material being roasted by the heat directly or indirectly to make the raw material to dry quickly, the final products discharge out by belt conveyor or screw conveyor. There is a shoveling plate installed in the dryer with the function of shoveling the materials up and down, to enlarge the contact area between airflow and materials and to enhance the efficiency and make the material running quickly. The heat carrier is hot air, the flue gas, etc. After the dryer process, It needs a cyclone dust collector to catch the items in the airflow. You should use a bag type or wet-type dust collector and afterward discharge the waste gas if you intend to further reduce the dust load of the exhaust.

Product Description Paddle stirring rotary dryer is as know as the paddle-harrow rotary dryer. The paddle rotary dryer sets high-speed spinning paddles, strengthening the crushing, and separating function. The crushing effect enlarges the contact surface of particles, which largely increases the heat transfer rate and vaporization rate. According to the practical test, the unit vaporization capacity per hour of paddle rotary dryer is as much as 25-60kg/m2, which is 1-2 times of traditional rotary dryer. The output is raised by 50% and fuel consumption is reduced by 30%. At the same time, the footprint and drying efficiency is raised by 40%. It is applicable for the drying process of high-moisture materials with 50%-85% moisture, such as sludge, bean dregs, starch residue, and sauce residue, spray corn bran, cassava dregs, brewer's grains, distiller's grains, straw, grass, organic fertilizer, chicken beef feces. We also help optimize the drying process according to the property of different biomass materials, production scale, application requirements, cost control, automation level, and site condition. Principle The crushed materials of which the moisture is about 50%-85% are sent into the roller conveyor to realize downstream drying. Under the effect of the inner shoveling plate, materials are taking and scattered constantly, and move in the spiral forward method. Through three layers (inner, middle and outer layer). The heat exchange is realized between material and hot air.

Product Description Paddle stirring rotary dryer is as know as the paddle-harrow rotary dryer. Zhengzhou Dingli New Energy Technology Co., Ltd according to the requirement of the market, and problems of traditional rotary dryer designs and manufactures paddle stirring rotary dryer. It solves the problem that the traditional dryer is not suitable for high humidity materials with MC higher than 50% and relatively low viscosity. Meanwhile since the black hole phenomenon occurring in the drum lowers the drying capacity and raises the energy consumption. The paddle rotary dryer sets high-speed spinning paddles, strengthening the crushing, and separating function. The crushing effect enlarges the contact surface of particles, which largely increases the heat transfer rate and vaporization rate. According to the practical test, the unit vaporization capacity per hour of paddle rotary dryer is as much as 25-60kg/m2, which is 1-2 times of traditional rotary dryer. The output is raised by 50% and fuel consumption is reduced by 30%. At the same time, the footprint and drying efficiency is raised by 40%. It is applicable for the drying process of high-moisture materials with 50%-85% moisture, such as sludge, bean dregs, starch residue, and sauce residue, spray corn bran, cassava dregs, brewer's grains, distiller's grains, straw, grass, organic fertilizer, chicken beef feces. We also help optimize the drying process according to the property of different biomass materials, production scale, application requirements, cost control, automation level, and site condition. Principle The crushed materials of which the moisture is about 50%-85% are sent into the roller conveyor to realize downstream drying. Under the effect of the inner shoveling plate, materials are taking and scattered constantly, and move in the spiral forward method. Through three layers (inner, middle and outer layer). The heat exchange is realized between material and hot air.