Original ZTE Rectifier Module ZXD1500 V4.0
ZTE Rectifier Module ZXD1500 V3.0 Supply
Flatpack2 380V Rectifier Doc 241119.825.DS3 v4 Model Flatpack2 380/3000 HE (UI) Part number 241119.825 INPUT DATA Voltage (nominal) 176 - 277 VAC / 260 - 400 VDC1) Voltage (range) 85 - 305 VAC / 260 - 410 VDC1) Frequency 45 - 66 Hz / 15 - 18.5 Hz2) / DC1) Current (maximum) @ nominal input, full load 18.2 ARMS Power Factor > 0.99 at 50% load or more Protection Fuse in L & N Varistor Disconnect when VIN is out of range OUTPUT DATA Voltage (default) 381 VDC Voltage (adjustable range) 300 - 400 VDC # Pb cell supported 156 - 168 3) Power continuous (maximum) 3000 W Power @ 85 VAC / 85 VDC 1200 W Current continuous (maximum) 9 A (@VOUT < 336 VDC) / 7.9 A (@ VOUT = 381 VDC) Current sharing (10 - 100% load) ±5% of maximum current from 10 to 100% load Static Voltage regulation (10 - 100% load) ±0.5% Dynamic Voltage regulation ±2.0% for 10-90% or 90-10% load variation, regulation time < 10 ms 5) Hold up time > 20 ms; output voltage > 300 VDC at 1500 W load Ripple < 1000 mVP-P , 30 MHz bandwidth Protection Overvoltage shutdown, Hot plug-in - Inrush current limiting, ORing diode, Fuse5), Short circuit proof, High temperature protection, Overload shutdown4) OTHER SPECIFICATIONS Efficiency @ 230 VAC / 380VDC input 96.2% / 96.6% Isolation 3.0 kVAC input to output, 1.5 kVAC input to earth, 1.5 kVDC output to earth, 3.0 kVAC CAN to primary, 3.0 kVAC CAN to secondary Alarms (Red LED) Low mains shutdown, High and low temperature shutdown, Rectifier Failure, Overvoltage shutdown on output, Fan failure, Low voltage alarm, CAN bus failure Warnings (Yellow LED) Rectifier in power derate mode, Remote battery current limit activated, Input voltage out of range, flashing at overvoltage Normal (Green LED) Input and output ok Acoustic noise, at nominal input and full load < 40dBA @Tambient< 25C / 40C MTBF (Telcordia SR-232 Iss.3 Meth. II Case L1) 2 291 210h (@ Tambient = 25 C) Operating temperature -40 to +75C (-40 to +167F), humidity 5 - 95% RH non-condensing Output power de-rates linear from 3000W @ 50C (122F) to 980W @ 7C(167F) Storage temperature -40 to +85C (-40 to +185F), humidity 0 - 99% RH non-condensing Dimensions[WxHxD] / Weight 109 x 41.5 x 327 mm (4.25 x 1.69 x 13) / < 1.95 kg (4.3 lbs) DESIGN STANDARDS Electrical safety EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013, IEC 60950-1:2013, UL 60950-1:2014, CSA C22.2 No. 60950-1-07 EMC EN 61000-6-1:2007, -6-2:2005, -6-3:2007 + A1:2010, -6-4:2007 + A1:2010, IEC61000-6-5: 2015, EN 300 386:v1.6.1, FCC CFR 47 Part 15:2013 Environment Tested according to: ETSI EN 300 019: 2-1 (Class 1.2) & 2-2 (Class 2.3) Normal operating conditions as per IEC 62040-5-3:2016 clause 4.2. Other operating conditions as per IEC 62040-5-3:2016 clause 4.3, must be advised 2011/65/EU (RoHS) & 2012/19/EU (WEEE)
clients can order from our website directly online by paypal. 0-100mA/0-1A/0-500mA Large current signal output isolators(output power 5W,please check our DIN11D IAP series. Features: >> Optical Isolation >> Accuracy grade: 0.1/0.2/0.5. Factory calibrated, the user can use directly >> Auxiliary power supply: 5V/12V/15V/24VDC or 220VAC (± 10%) >> One standard signal input: 0-5V / 0-10V/1-5V, 0-10mA / 0-20mA/4-20mA >> One standard output signal: 0-100mA/0-500mA/0-1A current signal or 0~1V(max 1A)/0~10V(max 500mA) voltage signal >> High linearity (nonlinearity > DIN35 rail mounting >> Size: 106.7x79.0x25.0mm >> Strong anti-electromagnetic interference and high-frequency signal interference capability Application: >> Analog signal data isolation, collection and transformation >> Isolated 4-20mA or 0-20mA signal transmission >> Signal isolation and conversion of industrial site >> Long-term signal transfer without distortion >> Instrument signal transceiver >> Power monitoring, medical equipment isolation Samples: 1: Input: 4-20mA Power Supply:24V Output: 0-10V ,20 ohm Type No.: DIN11L IAP A4-P1-V2(20 ohm) 2: Input: 4-20mA Power Supply: 24V Output: 0-500mA,20 ohm Type No.: DIN11L IAP V4-P1-Azï¼?Az:0-500mA,20 ohmï¼? DIN11L IAP - V(A)â?¡ - Pâ?¡ â?? V(I)â?¡ Input Signal Power Supply Output Signal Voltage Code Current Code Power Code Current Code Voltage Code 0-5V V1 0-1mA A1 24VDC P1 0-20ma A3 0~5V V1 0-10V V2 0-10mA A2 12VDC P2 4-20ma A4 0-10V V2 0-75mV V3 0-20ma A3 5VDC P3 user-defined Az 1-5V V6 0-2.5 V4 4-20mA A4 15VDC P4 user-defined Vz user-defined Vz user-defined Az
10g 850nm mm 300m lc xfp transceiver Specification: Data rate:10g Wavelength:850nm Distance:300m Interface:lc Fiber:mm Place of origin:made in china Port:shenzhen Working temperature: commercial:0°c to +70°c;industrial:-40°c to +85°c Optical module used in ethernet, sdh, sonet, can be compatible with cisco 2900 series, cisco 4000 series, cisco 5000 series, huawei, the pole into, d-link, zte, hp, juniper and other equipment. Our products require strict testing standards, standard packing form, to provide customers with quality service and timely delivery cycle. Function:photoelectric conversion module Scope of application: switch, ethernet, data center, sdh, sonet, atm
155m 1550nm sm 80km lc sfp transceiver Specification: Data rate:155m Wavelength:1550nm Distance:80km Interface:lc Fiber:sm Ddm:yes Place of origin:made in china Port:shenzhen Working temperature: commercial:0°c to +70°c;industrial:-40°c to +85°c Optical module used in ethernet, sdh, sonet, can be compatible with cisco 2900 series, cisco 4000 series, cisco 5000 series, huawei, the pole into, d-link, zte, hp, juniper and other equipment. Our products require strict testing standards, standard packing form, to provide customers with quality service and timely delivery cycle. Function:photoelectric conversion module Scope of application: switch, ethernet, data center, sdh, sonet, atm -
155m 1310nm mm 2km lc sfp transceiver Specification: Data rate:155m Wavelength:1310nm Distance:2km Interface:lc Fiber:mm Ddm:yes Place of origin:made in china Port:shenzhen Working temperature: commercial:0°c to +70°c;industrial:-40°c to +85°c Optical module used in ethernet, sdh, sonet, can be compatible with cisco 2900 series, cisco 4000 series, cisco 5000 series, huawei, the pole into, d-link, zte, hp, juniper and other equipment. Our products require strict testing standards, standard packing form, to provide customers with quality service and timely delivery cycle. Function:photoelectric conversion module Scope of application: switch, ethernet, data center, sdh, sonet, atm -
155m 1310nm sm 40km lc sfp transceiver Specification: Data rate:155m Wavelength:1310nm Distance:40km Interface:lc Fiber:sm Ddm:yes Place of origin:made in china Port:shenzhen Working temperature: commercial:0°c to +70°c;industrial:-40°c to +85°c Optical module used in ethernet, sdh, sonet, can be compatible with cisco 2900 series, cisco 4000 series, cisco 5000 series, huawei, the pole into, d-link, zte, hp, juniper and other equipment. Our products require strict testing standards, standard packing form, to provide customers with quality service and timely delivery cycle. Function:photoelectric conversion module Scope of application: switch, ethernet, data center, sdh, sonet, atm
40g cwdm sm 10km qsfp+ optical transceiver Specification Data rate: 40g Channel: 4*10 cwdm Distance: 10km Interface: lc Fiber: sm Ddm: yes Place of origin: made in china Port:shenzhen Applications 40gbase-lr4 40g ethernet links Infiniband qdr and ddr interconnects Client-side 40g telecom connections Working temperature: commercial: 0°c to +70°c;industrial:-40°c to +85°c Optical module used in ethernet, sdh, sonet, can be compatible with cisco 2900 series, cisco 4000 series, cisco 5000 series, huawei, the pole into, d-link, zte, hp, juniper and other equipment. Our products require strict testing standards, standard packing form, to provide customers with quality service and timely delivery cycle. Scope of application: switch, ethernet, data center, sdh, sonet, atm Package type: individual package or 10pc/package
