Combo melamine polishing pad has strong cleaning power and can be micro-polished. Using the principle of micro-grinding, the micro-fiber filaments with fine particles and hard texture, which are suitable for micro-grinding, polishing, dewaxing, repairing small scratches, and will not damage ceramic tiles, marble, VCT and other floors. Keep the floor as bright as new.
Micro-grinding, polishing and scratches repairing
Deep cleaning, no detergent needed
Combo melamine polishing pad is mixed together by melamine foam and special materials, which can significantly improve the wear resistance and durability. Equipped with polishing machine or self-adhesive sanding board, used for polishing and cleaning the counter tops, small space floors and walls, and stairs. Used for deep cleaning and restoration of floors walls, as well as general polishing and dewaxing.
Application
For cleaning all kinds of ceramic tiles, marble and wood floors and removing scratch marks. It is also used for deep cleaning and polishing the aircraft and yachts.
Supplier: Vinyl rolling floor, sports floor, rubber floor, luxury vinyl floor tile, stone plastic floor (spc plank), anti static floor and raised access flooring
Tufkote W8731PT Floor Clear Satin Tufkote W8783HGP Floor Clear Gloss
Supplier: Rubber granules, sports flooring, gym floor, acoustic underlay, sports underlay indoor & outdoor, horse mat, cow mat. skin care products (dead sea minerals natural products soaps, bath gel, shampoo, hand soap) and organomed products for skin care
OR-E800W Ride-on Sweeper is the automatic cleaning all-in-one machine integrated with the vacuuming, sweeping and spraying functions. The enlarged wheels offer better trafficability. Characteristics : ·Designed with enlarged chassis, the sweeping width is 1,860mm, which offers high work efficiency. ·Solid enlarged tire increases the product trafficability. ·Large dust filter can completely clean up the dust; the electric vibrator can automatically clean the filter screen. ·Use of advanced high-performance maintenance-free batteries, featured by no leakage, no harmful gases and optional. ·The machine is featured with advanced cleaning and throwing-off technology, the theoretical value of waste hopper utilization rate is up to 100%. ·High-quality electric control system with overcurrent and undervoltage protection; offers safer and anti-slip slope experience. ·Full LED headlights,high-pressure spray and dust suppression system to avoid secondary dust re-entrainment. ·User-friendly design, the seats can be adjusted to the most comfortable state.Optional PFC charger, optional model free of windshield.
OR-I800W Ride-On Sweeper is the automatic cleaning all-in-one machine integrated with the vacuuming, sweeping and spraying functions. The enlarged wheels offer better trafficability. Characteristics : ·Designed with enlarged chassis, the sweeping width is 1,760mm, which offers high work efficiency. ·Large dust filter can completely clean up the dust; the electric vibrator can automatically clean the filter screen. ·Use of advanced high-performance maintenance-free batteries, featured by no leakage, no harmful gases and optional. ·The machine is featured with advanced cleaning and throwing-off technology, the theoretical value of waste hopper utilization rate is up to 100%. ·High-quality electric control system with overcurrent and undervoltage protection; offers safer and anti-slip slope experience. ·Full LED headlights, high-pressure spray and dust suppression system to avoid secondary dust re-entrainment. ·User-friendly design, the seats can be adjusted to the most comfortable state. ·Optional PFC charger, optional model free of windshield.
The ride-on floor scrubber V8 is powerful, and capable of cleaning requirements in the industrial environment of heavy oil. Besides, it has enough compactness and flexibility to deal with the large area of cleaning task quickly and effectively. It is mainly used in shopping center, departure hall, factory and logistics warehouse. Characteristics : - Automatically plus liquid system can select the most appropriate cleaning efforts under the ground dirty degree. - Long running time, up to 8 hours. Industrial structure design strong and dependable. - One Touch control panel, make the operation more easy. - Capacity water sensing system fully protect the brush and the suction system. - Up to 5950m2/h cleaning efficiency, provide efficient and cost-effective cleaning mode to the large ground. -The low volume and good vision of the work improve the operator's comfort and safety.
The square pressure polishing machine strength controlled by four angle, thus the pressure is more precise to control and the final products has higher precision. For pc terminations above 95% could pass 3d interferometer test, while for apc terminations this rate keep 90%. Each polishing jig for this machine is available as lc, sc, st, fc, mtrj, e2000 pc connector as well as angle polishing Made by high quality, hardened steel s136 imported from germany Using the good motors imported (ensuring the movement stable under ultra long time) Using the japanese nsk bearing ( ensuring the internal structure to be stable in the high-speed operation, extending the working life) The electron primary device is imported from omron (ensuring the electrical specification stable) Ferrule diameter: 2.5 mm (0.0984 inch)1.25mm(0.0492 inch). Ferrule material: Zirconia (zro2), quartz capillary, glass materials, colophony material stainless steel and titanium alloy Main parameter: Machine working voltage: ac220v(ac110v can be offered) Polishing chassis diameter:127mm Polishing chassis beating:¡¡§15um Machine net weight:23kg Machine size:250l*220w*300h Polishing time setting:0~99 hours 99 minutes 99 second Foam carton
Abrasive sponge for nail arts and industrial usage. Carton box 350x350x500 About 5kgs.
*100% Made in Italy bridge sawing machine now available with a rich variety of optional features and accessories. (* production and components are fully made in Italy) CNC control unit for cuts programming. Extended software functions to also perform slab leveling and surface profiling. Outstanding cutting capacity (3.7m on the X-axis by 3.7m on the Y-axis). Table turning from 0¦ to 355¦ with positive locks every 45¦ or free hydraulic brake positioning. Head tilt up to 45¦ for bevel cutting. Superior cutting accuracy thanks to the special tensioned and chrome plated beam design. Powerful 15HP main motor to satisfy any working requirements. Wide variety of optional features and accessories including: Tilting table û Motorized and, CNC-controlled, hydraulic tilt of the worktable. Laser alignment device. Variable speed main motor to meet any cutting conditions. More powerful 20HP main motor to meet the need for extra cutting strength. Hydraulic pop-up rollers with motorized, CNC-controlled lift for easy slab positioning. Corded or wireless pendant control to facilitate head positioning operations
