Products
Petroleum Oil Refining EquipmentAtmospheric Distillation Column And Vacuum Distillation UnitAsphalt Oxidation UnitUsed Oil Re-refining PlantVessel Type Waste Motor Oil Recycling PlantColumn Type Furfural Treatment Used Oil Re-refining EquipmentShort Path Evaporation Car Engine Oil Regeneration UnitUsed Motor Oil Cracking Process For Diesel Production Waste Tyre And Plastic Cracking For Pyrolysis Oil Steel Structures And Oil StationLaboratory Testing Equipment For RefineryDe-sufurization TowersPetrochemical Industry Related EquipmentPetroleum Transportation Wagons Oil Tanks ConstructionOur Supplies
Inquiry Basket
0 item in basket
Online Service
skype
Contact Us
Tel: 0086-138-966-84003
Fax: 0086-23-68418554
Mail: info@engineeringoil.com
Web: www.engineeringoil.com
Supplying different scale oil refinery plants from 50 tons to 5000 tons per day,
including desing, equipment, installation, construction service. We have advantages
on medium and small scale oil refining units, they're flexible, sustainable,
able to meet customers high standard expections.
Atmospheric distillation unit and vacuum distillation unit
Process introduction
First heat up the crude oil to 90-130 â?? through heat exchanger then add purified water and demulsifier, after mixing and then send in to electrical desalting and dewatering device to have the tiny droplets gradually extended to larger ,and then form a water layer to have water, dissolved salt, impurity ect removed.
After desalting treatment, crude oil is heated up to 220-250â?? to enter in to pre-fractionator, light gasoline is extracted from top of pre-fractionator, topped crude from tower bottom through heat exchanger and atmospheric furnace to be heated up to 360-370 â??, then enters in to atmospheric distillation tower, to separate out gasoline, kerosene ,light diesel, heavy diesel fractions, after
electrochemical treatment, theyâ??re product oil for supply.
Atmospheric bottom heavy oil will be heated up to 380-400
â?? and then flow in to vacuum distillation tower, to separate out different vacuum fractions, these fractions will be used as raw materials for catalytic treatment or lubricating oil. Vacuum residue after heat exchanged and cooled to be fuel or heat exchanged to make raw materials for coking, catalytic cracking, oxidation asphalt.
Main products from atmospheric distillation unit
1. Fraction from initial boiling point to
REBCO (Russian Export Blend Crude Oil) is a sort of Russian Export Crude Oil with a mixture formed in the system of pipeline Transneft by mixing heavy sour crude Ural from the Volga region and low-sulfur oil in Western Siberia, the relevant characteristics to the brand Urals. Urals brand oil is supplied through the Baku-Novorossiysk pipeline system and the Druzhba pipeline. Components of petroleum are separated using a technique called fractional distillation, i.e. separation of a liquid mixture into fractions differing in boiling point by means of distillation, typically using a fractionating column. Petroleum includes not only crude oil, but all liquid, gaseous and solid hydrocarbons. Our company exports to contries such as Malasia, Singapore, China, Taiwan and all countries in Europe and parts of Africa We'll be glad to have a deal with you.
Naphtha Hydrotreatment Unit
62 meters high 4.5 meters in diameter.
Fuel Oil is a fraction obtained from petroleum distillation either as a distillate or a residue Broadly speaking oil is any liquid petroleum product which is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power except oils having a flash point of approximately 40 C 104 F Oil is made of long hydrocarbon chains particularly alkanes cycloalkanes and aromatics The term Fuel Oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil heavier than gasoline and naphtha Fuel oils are used as fuel for power generation marine bunkers and large industrial heating plants Fuel oil 180 CST also known as Bunker Fuel or Residual Fuel Oil is characterized by its viscosity which is measured in centistokes CST The number 180 indicates the maximum viscosity of the oil at 50 degrees Celsius This specification makes it a relatively thick and viscous fuel compared to lighter fuel oils Both CST 180 and CST 380 fuel oils are considered heavy fuel oils and are commonly used in the shipping industry They are often referred to as bunker fuels and are used in vessels like cargo ships container ships and oil tankers
ESPO Crude Oil - The Gateway to Unmatched Energy! Sourced from the vast, pristine reserves of Eastern Siberia, ESPO Crude Oil is a light, sweet grade favored for its low sulfur content and superior refining qualities. Ideal for producing high-demand light distillates such as gasoline and jet fuel, it's the preferred choice for leading refineries aiming for efficiency and environmental compliance. Tap into the power of Siberia with ESPO Crude Oil, your solution for a cleaner, more sustainable energy future.
Crude oil is a naturally occurring unrefined petroleum product that is made up of a mixture of hydrocarbons and other organic compounds It is the raw material that is used to produce a variety of refined petroleum products including gasoline diesel fuel and heating oil Crude oil is extracted from the earth through drilling and is transported to refineries where it is processed and refined into various products Crude oil has a wide range of physical properties Crude oil is made up of 845 carbon 13 hydrogen 13 sulfur and less than 1 each of nitrogen oxygen metals and salts REBCO is a specific type of crude oil that is produced in Russia and the surrounding regions It is a highquality crude oil that is known for its low sulfur content and low viscosity The middle east light crude oil is also highquality crude oil The GOST 51 8582002 specification refers to the Russian standard for REBCO which outlines the crude oils characteristics and performance requirements Gost 51 858 2002 offers from exporters manufacturers suppliers wholesalers and distributors globally by price and quality of the oil REBCO is an important commodity in the global energy market and it is carefully regulated to ensure that it meets the necessary standards for safety and performance Maximum Sulfur Content 18 Paraffin Content 60 Maximum Water Sediment Content 12 Distillation Weight 21 Up to 200 N min 21 Up to 300 N min 41 Up to 350 N min 50 and Maximum salts content MGL 100
Bitumen a black viscous mixture of hydrocarbons obtained naturally or as a residue from petroleum distillation. It is used for road surfacing and roofing. Bitumen is a mixture of Organic Liquids that are highly Viscous, Black, Sticky, Entirely Soluble in Carbon Disulfide, and composed primarily of highly condensed Polycyclic Aromatic Hydrocarbons. Naturally occurring or crude bitumen is a sticky, tar-like form of petroleum which is so thick and heavy that it must be heated or diluted before it will flow. At room temperature, it is much like cold molasses. Refined Bitumen is the residual (bottom) fraction obtained by fractional distillation of crude oil. It is the heaviest fraction and the one with the highest boiling point, boiling at 525 C (977 F). Petroalliance are involved in import and the supply and trade of Bitumen Oil. This oil is a dark and viscous liquid which is sticky in texture. It is widely used in road construction, waterproofing, paints, enamels etc. It is available to clients in different types of settings at highly affordable prices. It is widely acclaimed amongst our client base for its supreme quality. Uses of Bitumens Bitumen is primarily used for construction and paving of roads. Its other uses are for Bituminous Waterproofing Products, including the use of bitumen in the production of roofing felt and for sealing flat roofs.
Base Oil SN 350 is a medium stock base oil produced from the vacuum distillates and residual components using the traditional refining methods. It has viscosity 8-9,5 cSt at 100C and 67-70 cSt at 40C. SN 350 is used in lubricant and lubricant additives production, mainly for industrial applications. The main benefits of SN 350 base oils are low sulphur content, high viscosity index, high oxidation stability and good susceptibility to the additives.