Customized size, drawing and quotation according to customer needs.
Hongchang Aluminum supplies aluminum sheets and coils for the manufacture of bottle caps, which are ideal materials for PP caps for whiskey bottles and other beverage bottles. It has excellent moisture-proof, anti-seepage and anti-counterfeiting properties, making it truly safe, healthy, fast and environmentally friendly, increasing the added value of the product. The production of PP bottle caps has strict requirements on the strength, elongation and dimensional deviation of the material, otherwise cracks or creases will appear during the processing. In order to ensure the convenience of printing after the bottle cap is formed, the surface of the bottle cap material is required to be smooth. No roll marks, scratches and stains. Commonly used alloys include 8011-H14, 8011-H16, etc. Aluminum bottle cap materials can be produced by hot rolling, continuous casting, continuous rolling or cold rolling. 8011 aluminum closure plates are used to manufacture screw cap systems for bottles and other containers and are one of the main products in the aluminum packaging market. Aluminum's airtight and light-tight properties and ease of shaping and decoration make it the material of choice for enclosed applications. Aluminum PP lids are used for glass containers including mineral water, natural water, non-alcoholic and alcoholic beverages, health supplements and juice products.
5052 aluminum coils is Aluminum-magnesium alloy aluminum coils. Mg is the main alloying element in 5052 aluminum coils. It is the most widely used rust-proof aluminum. The alloy is high in nature, especially fatigue resistance, plasticity and corrosion resistance, with high strength. It can not be heat-treated, the plasticity of it is good in semi-cold hardening. It s low in plasticity during cold hardening, and good in corrosion resistance with good weldability, poor machinability and polishing. The main alloying element of 5052 aluminum sheet is magnesium, and aluminum-magnesium alloy also contains a small amount of Mn, Cr, Ni, Ti, etc. Most of the Mn in the alloy forms MnAl6 except for a small amount of solid solution. In the interior of the 5052 aluminum coils, the effect of Cr is similar to that of Mn, which improves the resistance to stress corrosion cracking, improves the strength of the base metal and weld, and reduces the tendency of weld cracking, but its content generally does not exceed 0.35%. Surface Advantages of 5052 Aluminum coils: 1. surface of 5052 aluminum coils is not allowed to have cracks, corrosion spots and traces of nitrate. 2. The surface is allowed to have peeling, air bubbles, surface roughness. and it is also allowed to have local mechanical damage with a depth not exceeding 8% of the nominal thickness of the part where the defect is located. But the maximum depth of the defect shall not exceed 0.5 mm, and the total area of the defect shall not exceed the total area of the coils 5%. 3. Allow the supplier to illuminate the profile longitudinally to a smooth surface. 4. Other requirements: There are demanders and suppliers to draw up their own. Application of 5052 Aluminum coils: 5052 aluminum coils is mainly used for high plasticity with good weldability. It is also commonly used in transportation vehicles, ship sheet metal parts, instruments, street lamp brackets and rivets, hardware products, electrical enclosures, etc. It can also be used to manufacture aircraft fuel tanks, oil pipes, aerospace aluminum alloy materials, and is a typical rustproof alloy material. The atates of 5052 aluminum coils includes F, O, H12, H14,, H16, H18, H19, H22, H24, H26, H28, H32, H34, H36, H38, H111, H112, H114.
Aluminum alloy part Material ADC12 Weight 0.9kg Manufacture Process Die Casting Description Engineering Parts
Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
Material : aluminum alloy(3003al) Interior : nonstick coating Exterior: heat resistant coating Rim thickness : 4.0mm Bottom : spiral with logo Handle: similar stainless steel handle Package : color box Moq: 1500pcs per each 7.87 forged fry pan: $5.68 9.45 forged fry pan: $6.76 7.09 forged sauce pan with lid: $8.19 7.87 forged sauce pan with lid: $8.86 9.45 forged deep fry pan with lid: $9.09 9.45 forged stockpot with lid: $9.5
The third-generation Hastelloy alloy alloy20 is one of the more commonly used components in the C series. Due to its low nickel content, low cost, excellent mechanical and corrosion resistance, it is widely used in pump flow components where corrosion and wear coexist. The solubility of hardness in the ferrite phase reaches its maximum at 850, and as the temperature increases, the solubility increases rapidly and is much smaller than that of the austenite phase. The Cu content in c-276 has exceeded the high solubility in the ferrite phase. The Hastelloy alloy alloy20, formed by a large amount of Ni element composition, is used in industries such as chemical engineering, pharmaceuticals, seawater, fertilizers, and other industries for projects with high corrosion resistance requirements due to its unique characteristics that lie between ferrite and austenite structures, and its resistance to intergranular corrosion. In recent years, the nuclear power industry has developed a corrosion-resistant ability in the operation of power station equipment, which cannot be replaced by other materials. Containing a large amount of Cr component, with high oxidation resistance. The molybdenum element in stainless steel materials is only about 2%, which is far less than the molybdenum content of Hastelloy alloy alloy20. Therefore, high concentration acidity requires the use of materials well. Mainly used, it has the following corrosion resistance properties in oxidation and reduction, and excellent corrosion resistance to most corrosive media. In this oxidizing environment, such as in sulfuric acid manufacturing and solutions containing a large amount of oxidizing ions, it has excellent resistance to pitting corrosion, crevice corrosion, and stress corrosion. Product name ALLOY 20 STAINLESS STEEL Thickness range 0.3mm-3.0mm, Width range 600mm-1500mm Length 2000mm, 2438mm, 3048mm Size 1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required Finish No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint Lead time 7 to 15 working days after the receipt Packing Wooden pallet or according to customer's request Application Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Use of INCOLOY Alloy 825: 1. The heater is generally used in the oil refining unit; 2. Chemical plant equipment pipeline; 3. Fast cooling cylinder for solid solution used in textile industry; 4. Seamless steel pipe for heat exchanger and condenser. 5. High pressure seamless steel pipe for food (gb-2000) is a high-quality carbon structural steel and alloy steel seamless steel pipe suitable for chemical equipment and pipes with working temperature of - 40~400 �° C and working pressure of 10~30ma. 6. Seamless steel pipes for geological drilling and oil drilling control. 7. Cracking pipe for petrochemical industry is used to transport high-temperature and high-pressure fluid on fertilizer equipment. INCOLOY Alloy 825 Standard Food Grade Sanitary Tube: JIS G3447, KS D 3585, ASTM A270, EN 10357(DIN 11850), AS 1528.1, ISO 2037(NF A49-249) Heat exchanger tube: ASTM A249 / ASME SA249, GB / T 24593-2009, HG 20537.2 Industrial pipe: ASTM A312, EN 10217-7, GB / T 12771-2008, HG 20537.3 Drinking water tube: GB / T 19228 Mechanical tube: ASTM A554, EN 10296-2 Size Outer Diameter Range: 9.5~2000mm Thickness Range: 0.5~20mm (Size can be customized.) Length: Up to 11.8 meters per piece. Shape Section Round, square, rectangular Usage Sanitary tubing: for food processing industry, beverage industry, sugar mill and so on; Heat exchanger tube: condenser, boiler, super heater, evaporator and so on; Industiral pipe: for petroleum delivery, gas delivery, petrochemical industry, wastewater treatment, drainage system, and so on; Mechanical tube: handrail, railings, balustrade, hence and so on. Features: 1.Our stainless steel tubes pipes are treated by bright annealing, inside weld bead removing, precise polishing. The roughness of tubes could be under 0.3�¼m. 2.We have the non destructive testing ( NDT ), eg. online eddy current inspection and hydraulic or airtightness testing. 3. Thick welding, good appearance.The mechanical properties of tube could be tested. 4. And Our tubes are certificated by AD 2000-W0, PED 2014/68/EU, ISO 9001 : 2015. 5. Full material traceability is guaranteed during the manufacturing process. 6. Polished tube is supplied in individual plastic sleeves with capped ends ensuring optimum cleanliness. 7. Internal Bore: Tubes have a smooth, clean and crevice free bore.
Supplier: All type clothes, urea, all type agriculture and food items, all personal and entertainment items, all industrial and automotive items, all construction household and furnishing, all computers electronics and electrical, handicraft, items, npk, fertilizers t shirt, blanket,dry fruits, animal feeds, towel, bedsheets, toys, all grocery, copper wire scrap, copper ore concentrate, zinc ore concentrate, lead concentrate, fly ash, a4 paper, a3 paper, craft paper, occ, ldpe, hdpe , pvc resin, petroleum products, jp54, jet a1, crude oil, blco , biodiesel, diesel, fuel, coal, d2, petcock, pulses, mustard oil, spices , sanitizer, gloves, medical products, cement, core sand, old ships lng, lpg, all groceries items, food products, hms1 and hms2, fish, chicken feet, chicken paws, agri & food processing agriculture products, fertilizers, seeds, farm products grains, fruits, vegetables, river sands, aggregates, pvc electrical wire, rice, charcoal, wheat flour
Services: Export, import, merchant export import
Buyer: All metals, minerals, petroleum products, food products and paper products
