Infectious Disease Test

Fast results
Easy visually interpretation
Simple operation, no equipment required
High accuracy

The HAV IgG/IgM Rapid Test is for the qualitative detection of IgG and IgM antibodies to Hepatitis A virus (HAV) in whole blood, serum or plasma specimen as an aid in Hepatitis A diagnosis.

We can provide various infectious diseases test kits as listed.

Product name
Cat. No.
Specimen
Packing
Chlamydia Rapid Test Device
ICH-502
Swab/urine
Cassette: 10 or 40pcs/box or Customized
HBsAg One Step Hepatitis B Surface Antigen Test Device
IHBsg-302
Serum/plasma
Cassette: 10 or 40pcs/box or Customized

HBsAg Hepatitis B Surface Antigen Rapid Test Device
IHBsg-402
Whole blood/serum/plasma
Cassette: 10 or 40pcs/box or Customized
HBsAg One Step Ultra Hepatitis B Surface Antigen Test Device
IHBsg-302U
Serum/plasma
Cassette: 10 or 40pcs/box or Customized
HCV Hepatitis C Virus Rapid Test Device
IHC-302
Serum/plasma
Cassette: 10 or 40pcs/box or Customized
HCV Hepatitis C Virus Rapid Test Device
IHC-402
Whole blood/serum/plasma
Cassette: 10 or 40pcs/box or Customized
HIV 1/2 Antibody Rapid Test Device
IHI-402
Whole blood/serum/plasma
Cassette: 10 or 40pcs/box or Customized
H. Pylori Antigen Rapid Test Device
IHPg-602
Feces
Cassette: 10 or 40pcs/box or Customized
H. Pylori Antibody Rapid Test Device
IHPb-602
Serum/plasma
Cassette: 10 or 40pcs/box or Customized
Syphilis Ultra Rapid Test Device
ISY-402U
Whole blood/serum/plasma
Cassette: 10 or 40pcs/box or Customized
Dengue Fever Rapid Test Device
IDE-402
Whole blood/serum/plasma
Cassette: 10 or 40pcs/box or Customized
Malaria P. f. /P. v. Rapid Test Device
IMA-422
Whole blood
Cassette: 10 or 40pcs/box or Customized

Cheap Drug Metabolites Rapid Test
Accu-Tell® Multi-line Drug Cassette (Urine) is a rapid chromatographic immunoassay for the qualitative detection of multiple drugs and drug metabolites in urine at the cut-off concentrations.

TEST PROCEDURE of Saliva Rapid Test Cassette
Allow the test, urine specimen, and/or controls to reach room temperature (15-30 ºC) prior to testing.
1. Bring the pouch to room temperature before opening it. Remove the test cassette from the sealed pouch and use it within one hour.
2. Place the test cassette on a clean and level surface. Hold the dropper vertically and transfer 3 full drops of urine (approx. 120 �¼L) to the specimen well (S) of the test cassette, and then start the timer. Avoid trapping air bubbles in the specimen well (S). See the illustration below.
3. Wait for the colored line(s) to appear. Read results at 5 minutes. Do not interpret the result after 10 minutes.
 
LIMITATIONS
1. ACCU-TELL ®  Multi-line Drug Cassette (Urine) provides only a qualitative, preliminary analytical result. A secondary analytical method must be used to obtain a confirmed result. Gas chromatography/mass spectrometry (GC/MS) is the preferred confirmatory method.
2. There is a possibility that technical or procedural errors, as well as interfering substances in the urine specimen may cause erroneous results.
3. Adulterants, such as bleach and/or alum, in urine specimens may produce erroneous results regardless of the analytical method used. If adulteration is suspected, the test should be repeated with another urine specimen.
4. A positive result does not indicate level or intoxication, administration route or concentration in urine.
5. A negative result may not necessarily indicate drug-free urine. Negative results can be obtained when drug is present but below the cut-off level of the test.
6. This test does not distinguish between drugs of abuse and certain medications.
7. A positive test result may be obtained from certain foods or food supplements.
 We are Saliva Test Manufacturer.
Note: The above information is for reference use only. Please refer to the product insert provided with the products before use.

Accu-Tell ®  Multi-Drug Saliva Rapid Test Cassette for AMP/MET/COC/OPI/THC/PCP/MTD/MDMA/OXY/COT/BZO/KET/6-MAM is a lateral flow chromatographic immunoassay for the qualitative detection of multiple drugs and drug metabolites in saliva.

This assay provides only a preliminary analytical test result. A more specific alternate chemical method must be used in order to obtain a confirmed analytical result. Gas chromatography/mass spectrometry (GC/MS) and gas chromatography/tandem mass spectrometry (GC/MS/MS) are the preferred confirmatory methods. Professional judgment should be applied to any drug of abuse test result, particularly when preliminary positive results are indicated.

TEST PROCEDURE of Drug Metabolites Rapid Test
Allow the test cassette, specimen, and/or controls to reach room temperature (15-30 °C) prior to testing. Instruct the donor to not place anything in the mouth including food, drink, gum or tobacco products for at least 10 minutes prior to collection.
1. Bring the pouch to room temperature before opening it. Remove the test from the sealed pouch and use it within one hour.
Remove the collector from the sealed pouch and insert the sponge end of the collector into the mouth. Actively swab the inside of the mouth and tongue to collect oral fluid for a total of 3 minutes until the sponge becomes fully saturated. Gentle pressing the sponge between the tongue and teeth will assist saturation. No hard spots should be felt on the sponge when saturated.
2. Remove the collector from the mouth. Place saturated oral fluid collector into chamber and press sponge fully against the strainer to collect oral fluid.   Discard the collector.   Snap the cap shut on the collection chamber.
3. Place the test cassette on a clean and level surface.   Unscrew cap cover from the collection chamber.   Invert the collection chamber and transfer 3 drops of oral fluid (approximately 120 µL) into specimen well of the test cassette and start the timer.   Avoid trapping air bubbles in the specimen well. Place screw cap on the collection chamber. See illustration above.
 We are Drug Of Abuse Rapid Tests Supplier.

Accu-Tell ®  Multi-Drug Saliva Rapid Test Cassette for AMP/MET/COC/OPI/THC/PCP/MTD/MDMA/OXY/COT/BZO/KET/6-MAM is a lateral flow chromatographic immunoassay for the qualitative detection of multiple drugs and drug metabolites in saliva.

This assay provides only a preliminary analytical test result. A more specific alternate chemical method must be used in order to obtain a confirmed analytical result. Gas chromatography/mass spectrometry (GC/MS) and gas chromatography/tandem mass spectrometry (GC/MS/MS) are the preferred confirmatory methods. Professional judgment should be applied to any drug of abuse test result, particularly when preliminary positive results are indicated.

TEST PROCEDURE of Drug Metabolites Rapid Test
Allow the test cassette, specimen, and/or controls to reach room temperature (15-30 °C) prior to testing. Instruct the donor to not place anything in the mouth including food, drink, gum or tobacco products for at least 10 minutes prior to collection.
1. Bring the pouch to room temperature before opening it. Remove the test from the sealed pouch and use it within one hour.
Remove the collector from the sealed pouch and insert the sponge end of the collector into the mouth. Actively swab the inside of the mouth and tongue to collect oral fluid for a total of 3 minutes until the sponge becomes fully saturated. Gentle pressing the sponge between the tongue and teeth will assist saturation. No hard spots should be felt on the sponge when saturated.
2. Remove the collector from the mouth. Place saturated oral fluid collector into chamber and press sponge fully against the strainer to collect oral fluid.   Discard the collector.   Snap the cap shut on the collection chamber.
3. Place the test cassette on a clean and level surface.   Unscrew cap cover from the collection chamber.   Invert the collection chamber and transfer 3 drops of oral fluid (approximately 120 µL) into specimen well of the test cassette and start the timer.   Avoid trapping air bubbles in the specimen well. Place screw cap on the collection chamber. See illustration above.
 We are Drug Of Abuse Rapid Tests Supplier.

Alcohol Urine Rapid Test Strip
Accu-Tell® Alcohol Rapid Test Strip (Urine) is intended for use as a rapid method to detect the presence of alcohol in urine greater than 0.04%(40mg/dL). To confirm the concentration of positive specimens, an alternate, non-enzymatic technology such as headspace gas chromatography should be used.

CATALOG
Product Name Specimen Catalog No. Quantity per box
Alcohol Strip Urine ABT-ACH-A188 100T/50T

KEY POINTS
Detection for:  Ehyl alcohol in human urine greater than 0.04%(40mg/dL);
Reading time:  3 minutes;
Relative Sensitivity:  96%;
Relative Specificity:  100%;
Agreement:  98%.
 
INTRODUCTION of Hot Sale Urine Rapid Test Strip
Alcohol intoxication can lead to loss of alertness, coma, death and as well as birth defects. The BAC at which a person becomes impaired is variable. The United States Department of Transportation (DOT) has established a BAC of 0.02%(20mg/dL) as the cut-off level at which an individual is considered positive for the presence of alcohol. Determination of ethyl alcohol in urine, blood and saliva is commonly used for measuring legal impairment, alcohol poisoning, etc. Gas chromatography techniques and enzymatic methods are commercially available for the determination of ethyl alcohol in human fluids. ACCU-TELL ®  Alcohol Rapid Test Strip (Urine) is designed to detect ethyl alcohol in urine specimens.
 
INTENDED USE
ACCU-TELL ®  Alcohol Rapid Test Strip (Urine) is intended for use as a rapid method to detect the presence of alcohol in urine greater than 0.04%(40mg/dL). The ACCU-TELL ®  Alcohol Rapid Test Strip (Urine) is intended for the detection of ethyl alcohol in human urine. To confirm the concentration of positive specimens, an alternate, non-enzymatic technology such as headspace gas chromatography should be used.
 
TEST PROCEDURE
1. Open the pouch package and remove the test strip.
2. Dipping the strip into the urine specimen for at least 20 seconds.
3. After wetting the reaction pad by urine specimen, immediately remove the strip from the urine specimen.
4. Read the alcohol test results at 3 minutes. Compare the color of the reaction pad with the color card to determine the relative urine alcohol level.

Product Name Specimen Catalog No. Quantity per box
Alcohol Strip Saliva ABT-ACH-A187 100T/50T

KEY POINTS
Detection for:  Alcohol in human saliva at a cut-off concentration of 0.02% (20mg/dL);
Reading time:  2 minutes;
Agreement:  98%.
 
INTRODUCTION of Drug Of Abuse Rapid Tests
Two-thirds of all adults drink alcohol.1However, alcohol intoxication can lead to loss of alertness, coma, death and birth defects. The blood alcohol concentration (BAC) at which a person becomes impaired is variable. The United States Department of Transportation (DOT) has established a BAC of 0.02%(20mg/dL) as the cut-off level at which an individual is considered positive for the presence of alcohol. Determination of ethyl alcohol in urine, blood and saliva is commonly used for measuring legal impairment, alcohol poisoning, etc. Gas chromatography techniques and enzymatic methods are commercially available for the determination of ethyl alcohol in human fluids. ACCU-TELL ®  Alcohol Rapid Test Strip (Saliva) is designed to detect ethyl alcohol in saliva specimens.
 
INTENDED USE
ACCU-TELL ®  Alcohol Rapid Test Strip (Saliva) is a One Step method for the detection of Alcohol in human saliva at a cut-off concentration of 0.02% (20mg/dL).
This assay provides only a qualitative, preliminary analytical test result. An alternate, non-enzymatic technology must be used in order to obtain a confirmed analytical result. Headspace gas chromatography is the preferred confirmatory method.
 
Allow the pouched strip to equilibrate to room temperature (15-27 °C) prior to testing.
Abstain from placing anything in the mouth for fifteen (15) minutes prior to beginning the test. This includes non-alcoholic drinks, tobacco products, coffee, breath mints and food, etc
1.         Open the pouch package and remove the test strip. Observe the reactive pad on the end of the test strip. If the reaction pad has a blue color before applying saliva sample, do not use.
2.         Saturate the reactive pad with saliva from collection cup or by applying saliva directly to the pad. (It usually takes 6-8 seconds to be saturated.) Start timer immediately after saliva application.
3.         Read result at two (2) minutes. Compare the color of the reaction pad with the color card to determine the relative blood alcohol level.