Ct/pt Calibrator

product brief introduction Product Introduction Intelligent instrument calibrator for PT CT error and impedance admittance test.It meets the requirements of jjg313-94 current transformer verification regulation and jjg314-94 voltage transformer verification regulation.

CT PT load box Please use an appropriate power cord for this product. Only the power cord dedicated to the machine or a suitable gauge can be used. Connect and disconnect properly. Please do not connect or disconnect the test lead if it is connected to the charging terminal. Ground the machine. The grounding pole of the machine enclosure must be grounded, unless the product is grounded through the power ground wire. To avoid electric shock, the grounding conductor must be connected to the ground. Before connecting the input or output terminals, make sure that the machine is properly grounded.

Product Introduction Transformer Tester is new product created after widely adopt customers advices and deep theoretical study. It is based on the automatic FA Series Transformer Tester General which is produced by our company that is widely acclaimed and applied. The adoption of high-performance DSP and ARMadvanced manufacturing technology ensure a stable and reliable product performance full-featured high degree of automation high efficiency in the domestic leading level they are the professional testing equipments for transformer check in power industry. Product namesï¼?CT parameter analyzer CT analyzer frequency CT analyzer CTPT analyzer transformer tester frequency transformer characteristic tester transformer transient characteristic analyzer current transformer tester CT characteristics analyzer current transformer current transformer parameters analyzer features analyzer CT parameter tester tester current transformer current transformer parameters characteristics tester Comprehensive instrument for the transformer Recommended products

Applications: Tests for current transformer: 1) Excitation curve and parameters test 2) Turns ratio test 3) Ratio and phase error test 4) Polarity mark check 5) Winding resistance measurement 6) Secondary loop burden measurement 7) Error line curve test for protection CT 8) Transient CT parameters test 9) CT nameplate guess 10) Saturation hysteresis loop curve measurement Tests for voltage transformer: 1) Turns ratio test 2) Ratio error and phase angle error test 3) Polarity test 4) Secondary burden test 5) Winding resistance test Features: 1. Make evaluation for test results according to selected standards. 2. Make word report for test result. 3. Make word reports one time for multi-group test records on the PC. 4. Calculate the ratio errors and phase angle errors at rated burden and working burden in one time test. 5. Compare excitation curves with saved excitation curves in the same window.

Product Introduction Designed for automatic testing of protective and metrological CT/PT suitable for laboratory and field testing. The product names PT volt-ampere characteristic tester transformer volt-ampere characteristic integrated tester CT voltage-current characteristic integrated tester CT voltage-current characteristic tester PT volt-ampere characteristic tester transformer volt-ampere characteristic tester volt-ampere characteristics of variable polarity than integrated tester volt-ampere characteristic tester volt-ampere characteristics integrated tester volt-ampere characteristic tester features comprehensive tester

GF106 CT/PT TESTER is mainly used for field testing, it can finish the measurements (M) and protection (P) class CT, PT and TYP class CT. Adopt LCD, self-equipped mini type printer supporting field printing; supporting to use USB flash disk to dump data, with simple and convenient operation.

APG Clamping Machines factory 1.high quality clamping mould 2.Supply APG moulds 3.Experienced engineers 4.Long life service Main Technical Parameters 1.Volmet China supplier Automatic pressure epoxy insulator hydraulic APG injection machine 2.APG machine Application: APG machine is applicable for small-sized products such as transformer, bushing, post insulator, contact cover, sensor, various supports, etc. Products 1:Good product quality, fine surface finish of products without bubbles. 2:High efficiency and high automation,only need 1/2 workers operate APG machine,efficiency greatly raised but the intensity of labor is decreased. 3:Chemical resistance,electrical insulation,strength resistance greatly improved.

It is mainly used for field testing of P class CT and PT. The test items mainly include excitation characteristic, transformation ratio, polarity, degauss, 5% and 10% error curves, secondary circuit check, withstand test of power frequency alternating current and secondary load. Adopting LCD, self-equipped mini type printer supporting field printing; supporting to use USB flash disk to dump data, with simple and convenient operation.

GF1061 portable CT PT analyzer is mainly used for field or lab testing, it can finish the measurements (M) and protection (P) class CT, PT and TYP class CT. Adopt 7 inch touch TFT LCD, self-equipped mini type printer supporting field printing; supporting to use USB flash disk to dump data. The CT PT Analyzer is the most complete and easy-to-use testing system for protection and metering CTs according to IEEE and IEC standards. Accuracy 0.05% Power supply AC 220V±10% or AC 120V±10%, 50/60Hz or Battery Output voltage 0-100Vrms Output current 0-5Arms (20A peak-value) Output power 0-400 VA (1500 VApeak) Automatic frequency variation range 0.1-60Hz Equivalent excitation voltage 5000V Accuracy 0.5% Secondary winding DC resistance measurement Range 0.1-1000�© Accuracy â?¤0.05% Secondary actual load measurement Range 5VA-1000VA Accuracy â?¤0.5%�±0.1VA CT/PT phase error measurement Accuracy �±1min (typical) / 3 min (guaranteed) Resolution 0.1min CT ratio error measurement Range 1-50000 Accuracy .05% PT ratio error measurement Range 1-10000 Accuracy 0.05%