among non-ferrous and ferrous metallurgy, iron, aluminum, copper, zinc, tin, nickel, tungsten, chromium, burrs and so on metals, use rotary kiln as smelting equipment, sinter, roast and direct return the ore, concentrate and intermediate. For example, during aluminum production, this is used to roast aluminum hydroxide to produce alumina; during iron making this is used to produce pellets for blast furnace.
boiler system, steam turbine system, generator system, dedusting system, and water treatment system. Surplus coal gas is used as fuel, with a small part of lignite, to generate electricity with surplus gas, which saves cost and reduce emissions of carbon monoxide.
Introduction The features of the equipment are advanced technology, reliable performance, rational structure, flexible layout, simple application and maintenance. The PLC control system is applied to realize mechatronics integration system. At present, there are 16 series, more than 80 kinds of production for the regeneration production line. Clay sand processing production line Vibration conveyor, cast hanging conveyor, belt conveyor, magnetic separation machine, winding machine, hexagonal mesh, sand library, two-way cooling bed, hoisting machine, belt machine, boiling reclaimer, belt conveyor, hoist, discharger, belt machine, sand library, the disc feeder, belt conveyor, hoist, belt conveyor, exhaust ventilator, accessories, two-way feeder, screw feeder, accessories electronic scale sand mixing machine, belt machine, the disc feeder. 1. Flask shaker Exciting fore of vibration motor make the falling sand along the chute to the bucket machine, with advanced and reasonable structure, shakeout of high efficiency, smooth and steady, low noise. 2. Belt conveyor This conveyor is a new type designed according to the special application of casting plant. It is mainly used for conveying the new sand, used sand, molding sand, coat and lime stone as well as the construction material, chemical industry and food processing for all granular or block shape material.
Supplier: Lime kiln plant lime hydrated plant dolomite plant pcc plant, gcc plant
Supplier: Quick, hydrated lime
Calcium silicate board production plant Calcium Silicate Board Equipment Design scale Annual output: 5 million sqm According to the index, according to the annual production of 300 days, equipment availability to 90% plan, the rate 95% plan, daily output for 5000 M , with long x width thick = 2440 x 1220 x 6 mm standards Board plan, nissan 1800 pieces, 2-2 product specifications Products: long x width thick = (2400, 2440) x (1200, 1220) x (4 -10) mm using Exterior wall, interior wall, condole top, cinemas, theaters and have special use sound-absorbing board, all sorts of adornment With the board, central air-conditioning and ventilation with board and so on. Density: 900-1200kg/m3 thisis a new type of building decoration material, which is mainly made from high-grade siliceous materials and lime refractory with the mixture of natural fiber as reinforcing material Suggested using place: widely applied in the suspended ceiling system of business building, entertainment facility, supermarket, hotel, restaurant, hospital, theater, warehouse, apartment building and so on. Chief introduction and usage: This production line is used to making calcium silicate board continuously with high technology and high automatic degree. At present, no asbestos calcium silicate board (including temperature asbestos calcium silicate board) is still in production and sales of emerging exuberant sell well, not only in China, but also in abroad. The basic reason is: this plank raw material origin is widespread, the price is low, advanced production technology, equipment availability is high, the product is very superior performance, especially energy saving, seismic, fire prevention, high strength, light, very suitable for various kinds of building the internal and external wall panels, sound insulation board, the ceiling and all kinds of adornment with board, and construction is convenient, and construction speed is quick, accord with national energy saving, environmental protection, economy applicable principle. advantage Configuration dust collector, eliminate dust flying, collecting dust to used for production In order to prevent various kinds of dust on the dangers of the body and the environment, the design in the beating, board again in processing dust point set dust collector, make the air HanChenLiang standards. Collection of powder Dust to press the certain proportion of direct join ingredients, continue to used for production.
Introduction CITICHL is one of the largest design and manufacture enterprises for rotary kilns in China, which started producing in 1950s. We have totally produced more than 250sets of rotary kilns including dry, semi-dry and wet ones used widely in cement, metallurgical, chemical industry, refractory, active lime, paper-making etc. Specifications are from Φ1.2 to Φ6.1m. They have been exported to Thailand, Pakistan, Indonesia, Vietnam etc. Our company has absorbed technologies from famous international companies such as Smidth, Polysius, KHD, etc. In recent years along with the advances in cement producing, cooperated with design institutes in Tianjin, Nanjing etc, developed new large serial products of dry processing rotary cement kilns, matching 1000-5000t/d large and 8000-10000t/d extra-large cement production line. There have been nearly hundred sets put into operation in the cement plants of Anhui, Hailuo, Jilin Shuangyang, Indonesia Kupang etc. Our company has the first-rate group on rotary kiln development, study and design, perfect experiment and testing measures, and superior manufacturing equipment and technology for large rotary kiln, while has formed the complete technical and producing system on the design, manufacture, installation, commissioning service for the equipment. Application and operating principle: The rotary kiln is central equipment for cement clinkering system in the new large dry processing cement production, which can be used with unit-or-twin-stream preheater, calcining combustor. 90%-95% of the raw material which has been pre-calcined feeds into the slow rotating, inclining installed rotary kiln from the rear. Under the composite effect of circumferential tilting and axial movement, the material slowly flows through the whole drum, the fuel (coal dust, oil or natural gas) sprays from kiln head into high temperature zone for burning, which produces the required heat for physical and chemical reaction of combination and crystallization of material inside the kiln. Under the function of rear blower, the burning gas stream and material counter flow the whole kiln, completing heat exchange and physical/chemical reaction. The clinkered cement is discharge to the cooler. Characteristics: The kiln body is made of high-quality killed carbon steel or alloy steel plate and welded; The supporting type and rollers is of ZG35CrMo and 42CrMo steel; The sliding bearing is of non-scraping liner one with large clearance; The driving device adopts hard-toothed reducer, flexible sheet coupling, driven by DC motor; Hydraulic thrust roll is used; The kiln head and rear seal is of pneumatic or scaled type; With slow speed drive.
Supplier: Industrial machines, agriculture machines, clay brick plant, lime/sand brick plant, recycling plant, agriculture lab equipment, milk plant, generators, tractors, cranes, reapers, combine harvester, packing machines, agriculture machine lines
Peripheral Burner Vertical lime kiln, shaft kiln, vertical kiln, vertical lime, vertical shaft kiln MER high efficiency and energy saving gas burned single shaft kiln, its body structure adopts advanced scientific design of ANSYS software stress analysis. The patent structure has a stable strength of masonry structure, compact structure, reasonable stress, reliable operation, less wear and tear. The kiln lifetime is more than 10 years for one-time. The kiln covers small area, flexible arrangement.We are the best Pfr Kiln suppliers in China. MER Has a strong ability for supplying a complete set of kiln equipment, and owns independent intellectual property rights of new energy-efficient gas burned single shaft series products. The capacity includes: 80 t/d, 100 t/d, 200 t/d, 250 t/d, 300 t/d. The raw material size is 40~80mm, the product activity is~320ml. The fuel is gas.
