Mercury Marine 200Xl Fourstroke Outboard

The Mercury Verado 250 is a high-performance outboard motor known for its power and reliability. Here are some key specifications: Engine Type: 4.6L V8 Horsepower: 250 hp Steering: Digital Throttle & Shift (DTS) Starter: Electric Shaft Length: Available in 25" (X-Long) and 30" (XX-Long) Power Trim & Tilt: Yes Fuel System: Electronic Fuel Injection (EFI) Alternator: 115-amp Weight: Approximately 600 lbs (272 kg) Cooling System: Water-cooled with thermostat & pressure-controlled The Verado 250 also features the Advanced MidSection (AMS) for reduced vibration and noise, and Adaptive Speed Control (ASC) for maintaining engine RPM despite changes in load or conditions12.

Description by Manufacturer ENGINE Engine Type V6 Bore x Stroke 3.63 x 3.00 in. (921 x 762 mm) Displacement 186 CID (3,046 cc) DIMENSIONS Shaft Length 25 in. (635 mm) Weight 528 lb. (240 kg) GENERAL Propshaft Horsepower 175 HP (131 kW) Full Throttle Operating Range 5000-6000 RPM Gear Ratio / Shift F-N-R Cooling Water-cooled with thermostat & pressure-controlled The Mercury Diesel Outboard is a diesel two-stroke designed for light duty commercial patrol boat applications. The EPA certified engine joins the U.S. Department of Defense spec diesel outboard Mercury Marine released in May 2015. The Mercury Diesel Outboard features exclusive spark ignition, direct fuel injected 2-stroke technology which enables it to run on readily available ultra-low sulfur diesel fuel. SPECIFICATIONS HP: 175 HP (131 kW) Engine type: V6 Displacement: 186 CID (3,046 cc) Displacement: 3.0 L Full throttle: 5000-6000 RPM Shaft length: 25 in. (635 mm) Gearcase ratio: 2.08:1 Dry weight *Lightest model available: 528 lbs (240 kg) Bore and stroke: 3.63 x 3.00 in (921 x 762 mm) Fuel system: 2-stage Direct Fuel Injection (DFI) Cooling system: Water-cooled with thermostat & pressure-controlled Gear shift: F-N-R Exhaust system: Through prop KEY FEATURES Available with a 25â?? (635 mm) center section and the 2:1 Fleet Master gearcase in both right-hand and left-hand rotation. Industry-exclusive spark ignition diesel engine. Glow plug ensures consistent, reliable cold starting. Commercial patrol boat models meet EPA emissions standards. Cylinder heads designed specifically for combusting diesel fuel. High performance cylinder liners for maximum horsepower and optimal engine running quality. Fuel/air mixture is injected into the combustion chamber at 95 psi for enhanced high rpm running quality.

Used MTU Amrine Engine of The specification: Type: 20V538TB91 Rated Power: 3300 kW Speed at Rated Power: 1900 RPM Number of Cylinders: 20 Bore: 185 mm Stroke: 200 mm Total Displacement: 107.5 liters Fuel Consumption: 1150 liters/hour Dimensions (L x W x H): 3790 x 1640 x 2505 mm Weight: 9080kg 2units

The Volvo Penta TAMD41M-A is a reliable and powerful marine diesel engine. Here are some key specifications and features: Engine Type: 6-cylinder, 4-stroke, direct-injected, turbo-charged marine diesel engine with aftercooler1. Power Output: 147 kW (200 hp)1. Cooling System: Freshwater cooled exhaust manifold and oil cooler1. Alternator: 14 V/50 A1. Other Features: Flexible front engine mounting, wet type exhaust elbow, lubrication oil filter, and turbo-charger

We have a great range of new and used marine accessories. We are also main dealers for outboard engines . Outboard Services and Marine Ltd are based on the south coast of Cornwall. We have a great range of new and used marine accessories. We are also main dealers for outboard engines, OUTBOARD BOAT ENGINE WHOLESALE We got OUTBOARD MOTOR ENGINES for sale at VERY VERY CHEAP affordable prices. Varieties of them. WE ARE SUPPLIERS OF HIGH QUALITY OUTBOARD ENGINES BOTH USED AND NEW. EXTREME OFFSHORE PERFORMANCE AND DURABILITYâ??NOT TO MENTION STRIKING GOOD LOOKS. item value Condition New Engine 4 Stroke Fuel Type Gasoline Cylinders 6 Engine Position OUTBOARD Dimensions (L x W x H) (mm) 1266 x 729 x 1179 Brand Name Outboard Engine Boat Motor Model Number Outboard Engine Boat Motor Engine type 4 Stoke Product Name Outboard 4 Stroke Displacement 52cc Starting system Manual Warranty 1 Year Type 4 Stroke Model Control System Tiller Control Color Black Application Marine SHIP Engine Model CM6D28C engines, OUTBOARD BOAT ENGINE WHOLESALE, We got OUTBOARD MOTOR ENGINES for sale at VERY VERY CHEAP affordable prices. Varieties of them. WE ARE SUPPLIERS OF HIGH QUALITY OUTBOARD ENGINES BOTH USED AND NEW. EXTREME OFFSHORE PERFORMANCE AND DURABILITYâ??NOT TO MENTION STRIKING GOOD LOOKS. OUTBOARD 4 STROKE Mileage one to two hours used Fuel Gasoline and Diesel Gears Manual and Authomatic Engine 4,6 and 8 Shaft long shaft 25 Colour gray and white Colour Choice of colours

Type: Outboard Motor Year: Current Model: F40 HP Jet Drive Model Number: F40JEHA Series: Four Stroke Jet Drive HP: 40 Engine Type: 3 Cylinder Displacement: 45.6 ci (747 cc) Borex Stroke: 65 x 75 mm (2.56 x 2.95in) Prop Shaft Horsepower: 30 @ 5500 RPM Compression Ratio: 9.4 RPM Range: 5000-6000 Fuel Induction System: EFI (SOHC) Fuel Type: Unleaded gasoline (minimum pump octane 87) Exhaust: Thru prop Ignition System: TCI Microcomputer CARB Rating: 3-Star Alternator Outputat WOT: 16A Starting System: Electric Lubrication: Wet Sump Oil Capacity: 2.1 quarts Recommended Engine Oil: Yamalube 4M Gear Ratio: Direct Drive Control Type: Tiller Handle Trolling Throttle Adjustment: N/A Cooling: Water, Thermostatic Control Gear Shift: F-N-R Command Link System: No Enhanced Ultimate Corrosion Protection System UCP: Standard Feature Power Trim and Tilt: No Shaft Length: 20 inch Gearcase Rotation: Jet Drive Propeller: Jet Drive Tiller Handle Kit: Optional Freshwater Flush: Yes

Specifications Engine Type 16-Valve DOHC Direct-Action In-line 4 Displacement 2670 cc Bore x Stroke 94x6.2 mm Recommended Max RPM 5000-6000 Lubrication System Wet Sump Fuel Management EFI Ignition TCI Starter System Electric Alternator Output 12V - 37A with Rectifier Regulator Operation Method Remote Control Trim & Tilt Method Power Trim & Tilt Digital Network Gauges with Fuel Management Standard Gear Ratio 2.00:1 OEDA Emission Rating ???? Scavenging Double Overhead Camshaft Fuel Management EFI Oil Pan Capacity (litres) 5.8 Spark Plug LFR5A-11 Gear Shift F-N-R Exhaust system Through Propeller Hub (Jet) Prop. Engagement Spline

Specifications Engine Type 16-Valve DOHC Direct-Action In-line 4 Displacement 2670 cc Bore x Stroke 94x6.2 mm Recommended Max RPM 5000-6000 Lubrication System Wet Sump Fuel Management EFI Ignition TCI Starter System Electric Alternator Output 12V - 37A with Rectifier Regulator Operation Method Remote Control Trim & Tilt Method Power Trim & Tilt Digital Network Gauges with Fuel Management Standard Gear Ratio 2.00:1 OEDA Emission Rating ???? Scavenging Double Overhead Camshaft Fuel Management EFI Oil Pan Capacity (litres) 5.8 Spark Plug LFR5A-11 Gear Shift F-N-R Exhaust system Through Propeller Hub (Jet) Prop. Engagement Spline

2023 Yamahas 15hp 40hp 70HP 75HP 90HP 115HP 250HP 4 Stroke Outboard Motor / Boat Engine HIPPING AND DELIVERY : * We offer free shipping and delivery to all new customers, delivery is made directly to your doorstep. * Delivery takes just 3 working days, no custom troubles because the company takes care of all procedures. * We also offer wholesale and retail purchase, with good discounts the more you buy, the better your discount. * Tracking number is issued immediately after shipment is done.. Payments How To Order ? Specification Product Authentic Product Safe Packaging Shock-Resistant - Three layer of packaging Accessories Comes with complete accessories in Original Box Items Original Packing & Delivery SHIPPING AND DELIVERY : * We offer free shipping and delivery to all new customers, delivery is made directly to your doorstep. * Delivery takes just 3 working days, no custom troubles because the company takes care of all procedures. * We also offer wholesale and retail purchase, with good discounts the more you buy, the better your discount. * Tracking number is issued immediately after shipment is done.. Payments How To Order ? Step 1 : Please tell us what model and quantity you need. Step 2: We will make an Order Invoice for you to confirm the order details. Step 3: When we confirm everything, You proceed with the payment arrangement. Step 4: Finally we deliver the goods within the stipulated time. FAQ Q1: Can you accept small orders? A: Yes, we accepted a trial order for the first time, it is the start of business and our long-term cooperation in the future. Q2:.What's your payment terms? A: We accept Bank , Alibaba Payment Q3: What are the shipment terms ? A: Express( DHL, FEDEX, TNT, UPS). -- Takes 3-7 Days express delivery after receipt of payment. -- Tracking number will be sent to you after shipment, you will receive all important shipping updates by email Step 1 : Please tell us what model and quantity you need. Step 2: We will make an Order Invoice for you to confirm the order details. Step 3: When we confirm everything, You proceed with the payment arrangement. Step 4: Finally we deliver the goods within the stipulated time. FAQ Q1: Can you accept small orders? A: Yes, we accepted a trial order for the first time, it is the start of business and our long-term cooperation in the future. Q2:.What's your payment terms? A: We accept Bank , Alibaba Payment Q3: What are the shipment terms ? A: Express( DHL, FEDEX, TNT, UPS). -- Takes 3-7 Days express delivery after receipt of payment. -- Tracking number will be sent to you after shipment, you will receive all important shipping updates by email