Susceptibility Of Solid By Gouys Method

What is Frit?

The mixture of silica and fluxes which is fused at high temperature to make glass. A frit is a type of ceramic glass that predominantly consists of silica, di boron trioxide and soda. This combination of raw materials are industrially melted and rapidly cooled. Frits form an important part of the batches used in compounding enamels and ceramic glazes. Not all glasses that is fused and quenched in water is frit, as this method of cooling down very hot glass is widely used in glass manufacture.



What are the Classifications?



Opaque Frit: It has lower or higher coefficient of thermal expansion, water anti- penetration ability, wide firing range, low softening point, resist to crazing.


Transparent Frit: Excellent gloss & color development frit, often used in single fast firing wall and floor tiles, High Transparently glossy glaze suitable for rustic or homogeneous tiles.




How does a Ceramic Frit make?



Ceramic frits are obtained by fusing raw materials in a melting kiln at higher temperature. The melt is cooled quickly, either by quenching in water which transforms it into a fragmented solid that is practically insoluble in water.



What are the Uses in ceramics?

Because of their various applications, there are numerous types of frits, each with specific uses. Despite the diversity, manufactured frits typically all contain more than one kind of flux (for melting) and are stabilized with alumina and silica. This causes the frits to be more reliable in consistently reproducing glazes

Basic Characteristics
Appearance: slightly yellow to colorless viscous liquid
Ionicity: Cationic
PH value: 4.5-6.5
Solubility: dissolved in water at any ratio
Active content: 42 �± 1%
Hand feeling: instantly hydrophilic, comprehensive feel better
Features And Advantages
Hand feeling: instantly hydrophilic, comprehensive feel better
1, This product is a cationized amino and polyether-modified multi-copolymer block silicone oil emulsion, especially suitable for processing all kinds of chemical fiber, cotton, wool, and blended fabric, does not affect the fabric itself hydrophilic; no yellowing, suitable for bleaching or light-colored fabric;
2, Itis particularly suitable for processing cotton and polyester-cotton fabric, can achieve the instantaneous hydrophilic effect, but also has a certain soft, smooth hand feel;
3, It can be used as an antistatic agent for chemical fiber fabric; cationic strong, it with anion may occur coagulation, please make a trial or test a sample before application, or add our company's specialty products anion and cation anti-coagulation, agent;.
4, Suitable for continuous processing of the process, will not bring sticky roll; also suitable for padding method, high suction rate; without APEO.
Usage Method
5, This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning, the recommended use ratio can be diluted 1: 2.5 (20% solids) or 1: 5 (10% solids), do not need to adjust the pH value, the appearance of colorless transparent liquid;
6, After thinning, you can use the exhausting method and continuous padding method,
Exhausting method: the dosage (20% solids) 0.6-2% (owf), temperature 30-40 â??, 15-30min, bath ratio 1: 20-40;
Padding method: the dosage (20% solids) 6-20g / l, 120 â?? pre-bake, 150-180â??stereotypes baking;
Packaging and storage
50kg or 120kg of plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, the storage period for half a year.

Solid liquid separating machine introduction
The separation unit is a kind of effective and continuous separation and dehydration equipment, which adopts the method of first rapid solid-liquid coarse filtration and then screw extrusion. The principle of fast solid-liquid primary filter is centrifugal separation technology. The main parts are: transmission part, body, screen and other components. The principle of solid-liquid separator is screw extrusion solid-liquid separation technology. The main components are: body, screen, extrusion winch, reducer, discharge device and other components. It is widely used in livestock manure, slaughtering sewage, distiller's grains, potato dregs, wood processing enterprise sewage, biogas dregs liquid-solid separation, Chinese medicine dregs dehydration, food industry materials and so on. It is an ideal equipment for solid-liquid separation of blister manure.

This machine has the characteristics of small area, simple operation and convenient maintenance, which makes its feeding more stable. At the same time, it can process liquid materials and high water content solid materials. Our company has experienced more than ten years of production experience, and has carried out many technical improvements on the spiral extrusion solid-liquid separator.

waste recycle organic fertilizer making machine advantages
1. The liquid material can be directly used for crops as organic fertilizer.
2. The solid manure can be shipped to regions that the lack of fertilizer to improve the soil structure. What's more, mix in the grass, bran stirring, adding strain fermentation, can be made of organic compound fertilizer granulation.
3.Can be made into granular feed, fish feed for good.
4.For flowers/special economic crop fertilization, can improve soil organic matter.
5.The sale of organic fertilizer can acquire additional economic benefits.

Cathodic Arc PVD Coater

http://www.pvd-metallizer.com


Cathodic Arc PVD Coater adopts a method of arc discharge to evaporate directly metal from solid cathode targets and the evaporated material is ions from cathode substance released from the cathode arc glow, thereby deposit films on the surface of the substrate.

This equipment is designed to use advanced plasma technology, combining technique of electric arc discharging with magnetron sputtering coating technique by reactive coating method, for achievement of imitation of golden film, gold saturated film as well as other superior decorating films.

Name 4,7-Dichloroquinoline

CAS 86-98-6
Structure Form
Quality Standard Item
Standard

Appearance : pale yellow crystal solid
Content: 98.5%£¨GC£©
4,5-Dichloroquinoline: 1.0
Moisture: 2%

Synthetic method 4,7-dichloroquinoline is produced with quantitative quinolinic acid as raw material through dehydrogenation and chlorination.

Storage store at dry warehouse, 25kg/hard paper board drum lined with plastic film.

Quality Specifications X WW WG N M K
Color Slightly Yellow PaleYellow Yellow DeepYellow Yellow Brown YellowRed
Correspond to the standard glass color piece of rosin
Appearance Transparent Solid
Softening point, (¡æ)(by ball and ring method),min. 76 75 74
Acid No. (mgkoh/g), min. 166 165 164
Unsaponifiable material (%), max. 5 5 5
Alcohol Insoluble material (%), max. 0.03 0.03 0.04
Ash (%) max. 0.02 0.03 0.04



225 KG net, 231 KG gross packed in new galvanized iron drums

Polyaluminium chloride

1. Its dosage lower than aluminum sulfate (based on Al2O3) and water treatment cost is lower than other inorganic flocculants.
2. The product can cause quick formation of flocs, big flocs formation and rapid precipitation. Its treatment capacity is 1.3-3.0 times of other inorganic flocculants.
3. It enjoys wide-range adaptability for different-temperature source water and a good solubility.
4. It is slightly corrosive and easy for operation.
5. The liquid product is suitable for automatic dosing. Furthermore, it will not block pipes over long-time usage.
GRADES
PAC-01,White powder, spray dryer type, for drinking water treatment or paper production.
PAC-02,Yellow powder, spray dryer type, for drinking water treatment or wastewater treatment.
PAC-03, Yellow powder, drum dryer type, for drinking water treatment or waster water treatment.
APPLICATION METHODS
1. The liquid product can be dosed directly or dosed after dilution. As for the solid product, dilution is necessary before being dosed. Water amount for dilution shall be determined based on the amount of the chemical to be dosed and the quality of water to be treated. Dilution proportion for solid product is 2%-20%, and for liquid product, 5%-50%(based on weight percentage).
2. The dosage of the liquid product is 3-40g/MT and the dosage of the solid product is 1-15g/MT. The specific dosage is based on the flocculation test and on the trial.
3. Its acidity is lower than other inorganic coagulants.
PACKAGE AND STORAGE
1. The solid product is packaged in 25kg polypropylene woven bagswith inner plastics bags.
2. The liquid product can be stored for one year without losing its effect, while the solid product, for two years. The product should be stored in a dry and ventilative room, but the effect will not be affected even if it gets wet.

Pack in 25kg PP woven bags with inner plastic bags

Properties
The polymer body contains strong cationic group radical and activated-adsorbent group radical which can destabilize and flocculate the suspended solids and the negative-charged water soluble matters in the waste water through electro-neutralization and bridging adsorption. It is very effective in flocculating, decolouring, killing algae and removing organics. The product enjoys small dosage but can cause big flocs, rapid precipitation and low turbidity residue, and it can also produce small amount of sludge. It is adaptable to wide range of pH value, between 0.5 and 1.4. This product is smelless, tasteless and harmless. It can be widely used to treat source water and sewage water.

Application field

1ú¬Water clarification--improves influent, process and effluent water quality by reducing color, suspended solids and turbidity
2ú¬Dissolved air flotationí¬result in clearer subnatants, increased float solids, and greater throughput
3ú¬Belt filter, centrifuge, screw press dewateringí¬for use as the primary coagulant in dual polymer programs to increase production rates, cake solids and solids capture
4)Filtrationí¬improve filtered water quality and plant throughput.

SPECIFICATIONS
1. Appearance: colorless, transparent colloid
2. Molecular weight: í¦ 4í- 105
3. Solid content: í¦ 40%
4. pH, 30% solution: 4-8
5. Ionic nature: cationic

Grades:
PD LS 20: 20% conc., PD LS 20L :viscosity 100-300cps , PD LS 20H:viscosity 1600cps min., for fixing agent in paper or textile dyeing
PD LS 35: 35% conc, viscosity 200-100cps, fixing agent in textile dyeing
PD LS 41: 40% conc, viscosity 1000-3000cps, fixing agent in paper
PD LS 45: 40% conc, viscosity 2500-5000cps, fixing agent or floculant for water treatment
PD LS 49: 40% conc., viscosity 8000-13000cps, for water treatment
DADMAC monomer: 60% or 65% conc., for polydadmac production.

APPLICATION METHODS
When used alone, it should be diluted to the concentration of 0.5%-0.05% (based on solid content). When used to treat different source water or waste water, the dosage is based on the turbidity and the concentration of the water. The most economical dosage is based on the trial. The dosing spot and the mixing velocity should be carefully decided to guarantee that the chemical can be mixed evenly with the construction chemicals and materials in the water and the flocs can not be broken. It is better to dose the product continuously.


PACKAGE AND STORAGE
1. It is harmless, no-flammable and non-explosive, it can be stored at room temperature, it can not be placed in the sun.
2. It is packaged in plastic drums with each containing 125kg and 1000kg.

igh End Full Automatic biochemistry analyzer
Specification:
Throughput constant 180 T/h or 300T/h,best for middle or small size hospital
Closed integrated photovoltaic systems, no mechanical parts,maintenance free
Minimum reaction volume is 150ul,cost saving
Discrete,random access,automatic
Random choice of method, the real discrete automatic chemistry analyzer
This automatic chemistry analyzers have gained a lot of national patents during the researching.

Analyze Unit
l Throughput: constant 180 T/h, 81 reaction cuvette positions,multi-channel testing together.
l Minimum reaction volume is 150�¼l, cost saving.
l Determined by the sample sequence, inserted at any time emergency.
l Heating method: Direct thermal solid thermostat closed.

Optical Unit
l Closed integrated photovoltaic systems, no mechanical parts,maintenance free.
l Light Source:Halogen-tungsten lamp;
l Lifetime2000 h.
l 8 Wavelength,support single or dual wavelength.