Specification
This product mainly consists of alloy electric heating wires and silicone rubber high temperature insulating cloth,it generates heat rapidly with even temperature,high heat efficiency &good toughness,it conforms to American UL94-V0 grade flammability standard, it is easy to use,safe and water-proof,the aging life can be as long as 5 years.
Technical Parameters
1) The maximum temperature resistance of the insulating material:250C
2) Highest service temperature:250 C-300C
3) Insulating resistance:5M
4) Compressive strength:1500v/5s
5) Power deviation rate:±8%
6) High voltage resistance:>5KV
7)Maximum 1000mm 8000mm minimum 20mm, 20mm thickness1.5mm (thinness 0.8mm,thickness 4mm)lead wire length: Standard 200mm, in case
that the above dimensions are exceeded, please contact with our company.
Features
1) Designed according to actual shape and dimensions, including three-dimensional
geometry to meet the requirement of your equipment
2) Moisture-proof and non-slip silicone rubber material offers longer working life of heaters
3) Simply sticking to your components through sulfuration, adhesive or fixer
1. Temprature range:-60~250 degrees 2. Standard thickness: 1.5mm(can custome) 3. Size: can be customize 4. No moq 120x240mm 220v 200w
silicone rubber heater is a kind of thin film which heats upon electrified, in a standard thickness of 1.5mm, Adopting nickel chrome wires or 0.05 mm~0.10mm thick nickel chrome foils etched to some certain shapes, the heating component is wrapped with heat conducting and insulating materials on both sides, and completed in high-temperature die forming and aging heat treatment. Due to its high reliability, the product is highly competitive when comparing with other electric heating film products which normally have paste materials such as graphite paste or resistor paste, etc. coated on insulation materials. As a kind of soft red film which can be applied closely on different curved surfaces, the silastic heater can be fabricated in varies shapes and powers.
Our company can provide "m" type, "u" type, "h" and straight-type silicon carbide rod type, you can buy various types of furnaces according to the actual situation, different specifications of silicon carbide, if there are special needs, It can be resolved through consultation.research, etc. Silicon-carbon rods have the characteristics of high temperature resistance, oxidation resistance, corrosion resistance, fast heating, long service life, small high temperature deformation, convenient installation and maintenance, and good chemical stability. Matched with the automatic electric control system, the accurate constant temperature can be obtained, and the temperature can be adjusted automatically according to the curve according to the needs of the production process. Heating with silicon-carbon rods is not only convenient, but also safe and reliable. It has been widely used in high temperature fields such as electronics, magnetic materials, powder metallurgy, ceramics, glass, semiconductors, analytical testing, scientific research and so on. it has become the electric heating element of tunnel kiln, roller kiln, glass furnace, vacuum furnace, muffle furnace, smelting furnace and all kinds of heating equipment.
Current Specifications for Silicone Heaters Maximum Watt Density: 60 W/in Maximum Operating Temperature: 482 F Minimum Operating Temperature: 40 F Wattage Tolerance: 10% Dielectric Strength: 1000 VAC
Silicon rubber electric heating plate is mainly consists of nickel-chromium alloy heating wire and silicon rubber high-temperature insulation cloth. It has advantages of short heating time, uniform temperature, high thermal efficiency, high strength, convenient operation, long service life (4 years), and slow aging. Generally, the output power range is 0.4-0.8w/cm2. Since the output power varies with different installation and temperature regulation conditions of the heating sheet, please contact with us when placing an order. Technical parameters 1. Highest temperature resistance of insulation material: 250 degreesc 2. Highest service temperature: 250 degreesc 3. Insulation resistance: 5 m ohms 4. Compressive strength: 1500v/5s5, power deviation: +/-8% 5. Damp resistance: end face plates are used for basic damp proofing, the product will be out of use, after being placed in water or covered with frost for a long period of time.
Silicone Heating Plates beneficial to take out liquid and coagulum from drums easily by heating, such as adhesive, oil, asphalt, paint, paraffin wax, oil and various resin raw materials in the drum. It can make viscosity of materials descending and uniform by heating the drum, and reduce the power of pump. Therefore, the heater does not be restricted by seasons, and can be used throughout the year. The heating element is a Nickel-Chromium or Copper-Nickel alloy wire, this resistance is embedded between two layers of silicone impregnated glass cloth, making drum heater. A fitted stainless steel spring makes the mounting easy. A dial thermostat graduated from 30°C to 150°C allows the temperature maintenance adjustment. Or digital thermostat 0--280 degree C can adjust and display temperature as your need.The drum heater is weatherproof.
This commercial hot water heat pump is the best solution for hot water supply of commercial project, and can work with advantages of high safety, stability, much convenience, energy saving, and environment friendly, which assures 24 hours comfortable hot water using. It is widely used in hot water project of school, hotel, hospital, supper market and other large building, which needs large water volume supply. Commercial hot water heat pump series Model YINI-050S-RS Heating mode Circulating+Direct heat Ambient temp.range Rated heating capacity 18KW COP 4W/W Max. Running Current 9.7A Power supply 380V 3N 50Hz IP Code IPX4 Safety function High and low pressure protection, Overload protection, Temperature protection, Power phase sequence protection, etc. Refrigerant type/weight R407C/2.0kg Compressor QTY 1 PCS Compressor type Scroll Max. outlet water temperature 60 Water side heat exchanger type Casing/high efficiency tank Direct heat waterpipe nozzle G1 Internal thread (inch) Circulating waterpipe nozzle G1 Internal thread (inch) Air out type Top discharge Fan motor QTY 1 PCS machine dimension Packing dimension Net weight 130KG Gross weight 150KG Detailed Images Main Features 1) Copeland scroll compressor, quiet and high efficiency. 2) High efficiency heat exchanger. 3) 600 stage adjustment precision electronic expansion valve. 4) Schneider electrical components. 5) Intelligent controlling system. 6) Intelligent EE valve, excellent efficiency at different ambient temp. 7) Easy installation and LCD operation. 8) Automatically defrosting. Optional: R410a, R22, R407c refrigerant is available.
Supplier: Sic heating element,sic heater,silicon carbide heating element,mosi2 heating element,mosi2 heater,molybdenum disilicide heating element
Swimming Pool Heat pump are specially designed and engineered for pool or spa water temperature control. Intelligent control system are let the units high efficiency and stable working performance. The COP could be 6.8 which saves at least 80% energy compared with traditional electric swimming pool heating equipments. Suitable for large pools in hotel, public parks, schools, sport center, gyms, etc. enter, gyms, etc. Wholesale Constant Temperature Heater Swimming Pool Heat Pump Main Features 1) PVC Titanium heat exchanger with full resistance against corrosion, more durable. 2) Compact structure, easy demountable for access. 3) High efficiency compressor, saving energy. 4) Flow switch for water flow protection. 5) Intelligent controller and adjustment by quick mind microprocessor. 6) Intelligent LCD display wired controller. 7) Air exchanger (fins-coil )with hydrophilic coating. 8) Automatic defrosting function included. Optional: R410a, R32, R407c refrigerant is available. Model YINI-010-YC Heating mode Circulating Ambient temp.range Rated heating capacity 7.8KW COP 6.7W/W Rated input power 1.15KW Max. Running Current 5.9A Power supply 220V-240V 1N 50Hz IP Code IPX4 Safety function High and low pressure protection, Overload protection, Temperature protection, Power phase sequence protection, etc. Refrigerant type R32 Compressor QTY 1 PCS Compressor type Scroll outlet water temperature 28 Heat Exchanger Titanium Air Flow Direction Horizontal Automatic defrosting by 4 way valve Casing Material ABS plastic Rated water flow 2.5 mh Air out type Top discharge Fan motor QTY 1 PCS Noise 56 dB(A) machine dimension Packing dimension Net weight 44kg Gross weight 55kg