Salient features :-
An additional profit machine :-
* Designed to open raw cotton bolls by air turbulence and clean lower grades of cotton by separating dust, leaves immature bolls etc.
* Most efficient for cleaning Zoda, Leafy and other lower grades of raw cotton as well as Collection from pre-cleaners.
* Reduces manpower required for sorting, by allowing dust, leaves and immature bolls to fall below through grids with holes of different sizes for separate collection.
* Opened and Cleaned raw cotton delivered at the discharge-end
* Recovers useful raw cotton from trash cotton collections.
* No damage to cotton fibre in the process.
Robust construction :-
* A large capacity fan is provided before inlet to create sufficient air pressure to aerate raw cotton by air turbulence.
* Large diameter Beaters are provided to separate dust, leaves and immature bolls etc. and push the clean raw cotton towards the discharge- end.
* The grids are made of heavy- gauge steel sheets.
* The round holes of different- size grids do not get clogged easily.
* The top cover of the machine is of painted CR sheets to make the machine weather- resistant.
* The main shaft runs on three heavy-duty ball bearing encased in dust- proof housing to Give trouble free service for number of years, with lower power consumption.
Safe and trouble free :-
* Guarding at the feed-end as well as at the discharge-end has been provided for safety purpose.
* Totally enclosed by sheet metal with door to collect trash & pre-matured Bolls separately.
* Suitable base for fitting electric motor has been provided to eliminate slide rails.
* The covers of the machine are tightened by fly-nuts to enable the operator to attend the machine without using spanner.
* Driving arrangement is totally enclosed.
Salient features :- * Protects fibre quality * Cleans gently and efficiently * Optimizes ginning performance * Robust construction; longer life * Protects gin from damage by impurities * Made with superior technical know-how * Reduces maintenance of ginning machines. * Removes yellow/ pre-matured bolls, trash, stones and others impurities from raw cotton, there by improving the quality of raw cotton prior to ginning. * Increases productivity of ginning machines * Reduces load on ginning machines * Auto feeding made easy and trouble-free * Auto feeder maintenance reduced to minimum * Better quality of lint yields higher returns * Considerable saving in labour cost * Available in different models with different feeding systems for specific requirements. * All models can also be wheel-mounted for easy mobility.
Salient features:- * High capacity / Medium Capacity * Fully Automatic * High/universal Density Bales * Most Profitable * International Specifications * Highest Work Safety * Lowest Cost Per Bale * Lowest Power Consumption Per Bale * Lowest maintenance * Lowest packing material cost * Lowest manpower requirements * Very heavy duty structure for longer life * High pressure power pack of German Technology * Door less mechanism * Down packing, no underground pit
Features :- * Lowest power consumption per quintal lint ginned * Fully machined fly wheel / machine pulley * All rotating parts are precision machined using advanced manufacturing process on CNC machines providing best finish & Tolerances to provide enhanced life of the machine & zero down time Free accessories:- Box Spanner, + x 5/8 , T. Spanner 3/8, 1/8 BSP Threaded T Spanner , Beater Adjustment Gauge. Optional supply :- Templates, Foundation Bolts, Motor rails, Motor pulley, Guard for pulley, V-Belts, Seed Screw Conveyor, Roll Press, Roll Cutting stand, Cotton bag, Weighing stand, Lint Filling Platform, Bus bar Panel with all required Fittings, Platform Structure, Complete range of spares, Doffer Roller Assembly, Electrical Motor & Electricals.
Product Description Condenser is commonly used for the opening flow. Use blower and card pipe transmitting raw cotton or chemical fiber and the original cotton is condensed at the surface of dust cage with the suction of the blower and then stripped from it by beater, and go through the trash extraction of dust cage. Rich specifications for selection. Different power for different position in the flow. There are bypass devices at the top of this condenser and the raw cotton can be straightly transmitted to the next platform through this path. Technical Specifications Production kg/h: 800 Dust cage diameter mm: 500 Beater type: 6-Wing Blower diameter mm: 500 Blowing rate: Around 4500 General Power Kw: 4 Size (LxWxH) mm: 1721x800x1000 Machine weight kg: 600
Product Description Multi Mixer is the mixing process of blow room. It is suitable for mixing cotton especially for synthetic fibers whose mixing evenness is highly demanded. As this Multi Mixer is equipped with a beater at the outlet, the mixed fiber can be further opened before feeding to next machine. Technical Specifications Capacity: 800 Kg/h Number of trunks: 4-6 Air volume of conveying fan: 1.1 m3/s Power: 10.85 Kw Dimensions: 250 mm x 1600 mm x 4400 mm Net weight: 4800 Kg
Product Description Fine Opener is suitable for further opening and impurities removing of all classes of raw cotton, cotton chemical fiber and the middle to long chemical fibers shorter than 76mm. It mainly consists of cotton store and feeding construction that features strong opening and good effect of impurity removing. Technical Specifications Machine Type: TMI 60.5.1.200412a Production: 800 Kg/h Width: 1060 mm Beater type: Hedgehog Beater diameter mm: 610 Beater rotating speed r/mm: 480 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(LÃ??WÃ??H): 1810Ã??1650Ã??3875(including Condenser) Machine weight: 1800 Machine Type: TMI 60.5.1.200412b Production: 600 Kg/h Width: 1060 mm Beater type: Card wire roller Beater diameter mm: 600 Beater rotating speed r/mm: 540 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(LÃ??WÃ??H): 1810Ã??1650Ã??3875(including Condenser) Machine weight: 1800 Machine Type: TMI 60.5.1.200412c Production: 600 Kg/h Width: 1060 mm Beater type: Sawblade Beater diameter mm: 600 Beater rotating speed r/mm: 600 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(LxWxH): 1810x1650x3875(including Condenser) Machine weight: 1800
TMI 45.35.2.200426 - Mushroom Shape Laundry Press Product Description This mushroom shape Laundry Press is ideal for finishing tapered areas,yokes,small areas of dresses,short sleeves,and other hard-to-reach parts. Two separate cylinders:one is to close the top portion,and another is to apply pressure.This keeps the efficiency of each cylinder at maximum for the longest possible time.Adopting the hydraulic buffer makes to close or open the die head smooth and reduce noise and vibration.The integral design of the gas circuit is very simple and easy. Pressing part is especially big and made of iron fiber and durable cotton cover as well as with colour coded push-button switch.Its features are beautifully designed, strong, high stability and providing ease of operation and maximum operator convenience.
Product Description Mixing opener is suitable for all classes of raw cotton (usually for those with high maturity and higher class). These are placed in the front of the automatic plucker, and transmitted them to a small block brought by the automatic plucker raw cotton into the machine with the aid of Condenser add on (additional item), open and remove some impurities and dusts, then suck the raw cotton into the platform with its condenser. Technical Specifications Production Kg/h: 800 Kg/h Width in mm: 1060 Trash extraction efficiency: Trash extraction 3.5/hour, usually about 30-35% Spiked apron speed: 1, 1.25, 1.5, 1.75 m/min Bales speed: 60x 70x 80 100 m/min Press apron speed: 1x 1.25x 1.5x1.75 m/min Evening roller diameter/rotating speed: 260mm\200r/min Spike beater diameter/rotating speed: 400mm\400r/min Knife beater diameter/rotating speed: 400mm\430r/min Small hedgehog beater (1) diameter/rotating speed: 400mm\700;800;900r/min Small hedgehog beater (2) diameter/rotating speed: 400mm\745;850;960r/min Grid bars type/interval space: Flat steel grid bar spike knife double beater 12-22Small hedgehog beater (1) First group 12-22mm Second group 10-22mm Small hedgehog beater (2) 10-22mm Spike, knife beater and grid bar: Entrance10-15mm Exit12-20mm Hedgehog beater (1) and grid bar interval space: Entrance10-14mm Exit13-17mm Hedgehog beater (2) and grid bar interval space: Entrance10-15mm Exit15-20mm Press apron and spiked apron interval space: 60-80mm Spiked apron and evening roller interval space: 40-80mm Spiked apron and spike beater interval space: 5mm Motor specification: Rotating beater 6-4kw (left) 1430r/min Rotating spiked apron 2-21-6 0.6kw 930r/min Rotating Spiked apron 0-100 0.37kw 14r/min Size (LxWxH) mm: 5358x1430x3696 including Condenser Machine weight: 4200 Kg
Supplier: Double roller ginning machine, cotton boll opener, cotton baling press, pre-cleaner, lint cleaner, auto feeder for ginning machine, conveyor belt, CNC lathe
