Anterior Cervical Plating System

Packing list: A gasoline duplicating cutting torch·+ An explosion suppression gasoline tank(no duplicating machine, the userf+s original acetylene duplicating machine can still be used); 10 meters oil-resistant rubber hose·+longer hose optional·¼; 4 cutting nozzles: QZ30-1#- can cut steel sheet 3~10mm thickness·+optional·¼ QZ30-2#- can cut steel sheet 10~20mm thickness·+optional·¼ QZ30-3#- can cut steel sheet 20~30mm thickness·+optional·¼ QZ100-1#- can cut steel sheet 20~40mm thickness·+optional·¼ QZ100-2#- can cut steel sheet 40~60mm thickness·+optional·¼ QZ100-3#- can cut steel sheet 60~100mm thickness·+optional·¼ QZ300-1#- can cut steel sheet 100~150mm thickness QZ300-2#- can cut steel sheet 150~200mm thickness QZ300-3#- can cut steel sheet 200~250mm thickness QZ300-4#- can cut steel sheet 250~300mm thickness A set tip drills; A set o-ring·+spare parts·¼; Instruction; A set certification. Mark: CNC flame cutting machine combustion system reform Existing acetylene or propane CNC cutting machine can be to carry out technological transformation; combustion material feeding system will be changed to gasoline supply system, become gasoline CNC Cutting Machine. Performance Overview Thank you for your identify purchased the TONGTAI gasoline welding & cutting machines by your talents, the products have significant energy-saving effects and excellent cutting performance, itf+s magic laminated cutting, underwater cutting, drilling on the thick plate and other features are no matched by other flame cutting: =+ Easy operation: No electricity, no pressure in gasoline tank, overcome the tedious work before using. =ª Good cutting quality: The cutting slotted smooth, no undercut and burning sink in upside, no nodulation and no hung bits in downside. =ª Small heat-affected zone: Particularly for carbon steel, itf+s cut surface will not appear hardening phenomenon, so greatly reduced processing difficulties of under procedures. =+ It can cut layers, a dozen stacked with the plate, the cutting speed is same with the same thickness of the plate and can cut 10 mm thickness laminated steel which is the product of a magical function, but need to choice bigger a size than the normal cutting nozzle, it is because gasolinef+s weight is four times than acetylene gasf+s. The secondary combustion was generated on the lower surface of the plate when cutting. =+ As long as the bigger preheating flame was choice, this product can smoothly cut the plate even which was very dirty on the surface (rust, paint, concrete, etc.). =- The thick steel sheet can be punched security and fast, the most depth is up to250 mm thickness. =- The combustion tube is not backfire. =ª Can press the igniting torch nozzle on the plate surface and immerse in water, it will not be extinguished. =- Itf+s normal working temperature range is -40 f¦ to 50 f¦. =+ A cutting torch and cutting nozzle with cooling water can cut high temperature steel plate. Weight: 10kg/package Dimensions: length 610mm, width 380mm, high 350mm.

Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Price And Quantity: Minimum Order Quantity 1 Unit Price Range 2500000.00 - 3000000.00 INR/Number Product Specifications: Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Product Type Other Power Source Electricity Power 420 Volt (v) Usage/Applications Casting, Forging, Sheet metal etc Color Dark Blue Technology Other Operating Type Automatic Surface Treatment Painted Pressure 6-7 Bar Product Description: The Tunnel type/ roller conveyor shot blasting machine is best suitable for the shot blasting of I/H-Beam /Structural Steel Components etc. It consists of inlet and outlet side Roller conveyors as material handling systems. The components to be blasted are placed on inlet side of the roller conveyor, from where it travels forward and enters into the inlet tunnel. After passing through the inlet tunnel components enters into the blast zone which consists of 4 nos. of Blast Wheels. All these Blast wheel units are strategically placed around the Blast cabinet. The arrangement of the blast wheel ensures optimum blast cleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity onthe forward moving components & blast cleans them thoroughly. Blasted material moves forward and enters into the outlet tunnel. The spent abrasive from blasting operation after passing through the perforated floor plates will get collected in to the cabinet's bottom storage hopper. From where it is transferred to the bucket elevator, which elevate the abrasive vertically and discharges the same into a media separation unit where dust and fine abrasives are cleaned ensuring that only clean abrasive will re-circulate to the blast wheel units for effective and better cleaning. A Dust collection system is provided with the machine which will continuously remove the dust and fine particles, thus keeping the inside of the machine and the nearby environment dust & pollution free.

Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Price And Quantity: Minimum Order Quantity 1 Unit Price Range 2000000.00 - 2500000.00 INR/Number Product Specifications: Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Pressure 6-7 Bar Weight (kg) 3.5-4 Metric Ton Color Dark Blue Product Type Other Power 420 Volt (v) Usage/Applications Casting, Forging, Sheet metal etc Operating Type Automatic Surface Treatment Painted Technology Other Power Source Electricity Product Description It consists of inlet and outlet side Roller conveyors as material handling systems. The components to be blasted are placed on inlet side of the roller conveyor, from where it travels forward and enters into the inlet tunnel. After passing through the inlet tunnel components enters into the blast zone which consists of 4 no's of Blast Wheels. All these Blast wheel units are strategically placed around the Blast cabinet. The arrangement of the blast wheel ensures optimum blast cleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity on the forward moving components & blast cleans them thoroughly. Blasted material moves forward and enters into the outlet tunnel. The spent abrasive from blasting operation after passing through the perforated floor plates will get collected in to the cabinet's bottom storage hopper. From where it is transferred to the bucket elevator, which elevate the abrasive vertically and discharges the same into a media separation unit where dust and fine abrasives are cleaned ensuring that only clean abrasive will re-circulate to the blast wheel units for effective and better cleaning. A Dust collection system is provided with the machine which will continuously remove the dust and fine particles, thus keeping the inside of the machine and the near by environment dust & pollution free.

Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Price And Quantity: Minimum Order Quantity 1 Unit Price Range 1200000.00 - 1500000.00 INR/Unit Product Specifications: Power Source Electricity Surface Treatment Painted Product Type Other Technology Other Power 420 Volt (v) Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Pressure 6-7 Bar Color Dark Blue Usage/Applications Casting, Forging, Sheet Metal Operating Type Automatic Product Description: The diabola conveyor shotblasting machine is best suitable for the shot blasting of round BARS. Itconsists of inlet and outlet side diabola conveyors as material handling systems. The components to be blasted are placed on inlet side of the rollerconveyor, from where it travels forward and enters into the inlet tunnel. Afterpassing through the inlet tunnel components enters into the blast zone which consists of 1 no. of Blast Wheel. This Blast wheel unit is strategicallyplaced around the Blast cabinet. The arrangement of the blast wheel ensures optimum blast cleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity onthe forward moving & rotating components & blast cleans them thoroughly. Blasted material moves forward and enters into the outlet tunnel. The spent abrasive from blasting operation after passing through the perforated floor plates will get collected into thecabinet's bottom storage hopper. From where it is transferred to the buck etelevator, which elevate the abrasive vertically and discharges the same into a media separation unit where dust and fine abrasives are cleaned ensuring that onlyclean abrasive will re-circulate to the blast wheel units for effective and better cleaning. A Dust collection system is provided with the machine whichwill continuously remove the dust and fine particles, thus keeping the inside of the machine and the nearby environment dust & pollution free.

Roller Conveyor Shot Blasting Machine for Bright Bars Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 1 Unit Per Month Price And Quantity Price Range 100000.00 - 300000.00 INR/Unit Minimum Order Quantity 1 Unit Product Specifications: Product Type Other Warranty All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Power Source Electricity Operating Type Automatic Usage/Applications Casting, Forging, Sheet Metal Pressure 6-7 Bar Power 420 Volt (v) Color Dark Blue Surface Treatment Painted Technology Other Product Description: TheTunnel type/ roller conveyor shot blasting machine is best suitable for the shotblasting of Round steel Pipes..etc. It consists of inlet and outlet side Rollerconveyors as material handling systems. The components to be blasted are placedon inlet side of the roller conveyor, from where it travels forward and entersinto the inlet tunnel. After passing through the inlet tunnel components entersinto the blast zone which consists of 4 no�?�¢�?â?¬�?â?¢s of Blast Wheels. All these Blast wheel units are strategically placedaround the Blast cabinet. The arrangement of the blast wheel ensures optimum blastcleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity onthe forward moving components & blast cleans them thoroughly. Blastedmaterial moves forward and enters into the outlet tunnel. The spent abrasivefrom blasting operation after passing through the perforated floor plates willget collected into the cabinet�?�¢�?â?¬�?â?¢s bottom storage hopper. From where it istransferred to the bucket elevator, which elevate the abrasivevertically and discharges the same into a media separation unit where dust andfine abrasives are cleaned ensuring that only clean abrasive will re-circulateto the blast wheel units for effective and better cleaning. A Dust collectionsystem is provided with the machine which will continuously remove the dust andfine particles, thus keeping the inside of the machineand the nearby environment dust & pollution free.

Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Price And Quantity: Price Range 1200000.00 - 1500000.00 INR/Unit Minimum Order Quantity 1 Unit Product Specifications: Color Dark Blue Product Type Other Pressure 6-7 Bar Power 420 Volt (v) Power Source Electricity Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Technology Other Usage/Applications Casting, Forging, Sheet Metal Operating Type Automatic Surface Treatment Painted Product Description: It consists of inlet and outlet side Rollerconveyors as material handling systems. The components to be blasted are placedon inlet side of the roller conveyor, from where it travels forward and entersinto the inlet tunnel. After passing through the inlet tunnel components entersinto the blast zone which consists of 4 nos of Blast Wheels. All these Blast wheel units are strategically placedaround the Blast cabinet. The arrangement of the blast wheel ensures optimum blastcleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity onthe forward moving components & blast cleans them thoroughly. Blastedmaterial moves forward and enters into the outlet tunnel. The spent abrasivefrom blasting operation after passing through the perforated floor plates willget collected into the cabinets bottom storage hopper. From where it istransferred to the bucket elevator, which elevate the abrasivevertically and discharges the same into a media separation unit where dust andfine abrasives are cleaned ensuring that only clean abrasive will re-circulateto the blast wheel units for effective and better cleaning. A Dust collectionsystem is provided with the machine which will continuously remove the dust andfine particles, thus keeping the inside of the machineand the nearby environment dust & pollution free.

Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Product Specifications: Operating Type Automatic Technology Other Product Type Other Color Dark Blue Pressure 6-7 Bar Usage/Applications Casting, Forging, Sheet Metal Surface Treatment Painted Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Power Source Electricity Power 420 Volt (v) Product Description: It consists of inlet and outlet side Rollerconveyors as material handling systems. The components to be blasted are placedon inlet side of the roller conveyor, from where it travels forward and entersinto the inlet tunnel. After passing through the inlet tunnel components entersinto the blast zone which consists of 4 nos of Blast Wheels. All these Blast wheel units are strategically placedaround the Blast cabinet. The arrangement of the blast wheel ensures optimum blastcleaning and maximum utilization of the abrasive energy.Blast wheels fires the abrasive at high velocity onthe forward moving components & blast cleans them thoroughly. Blastedmaterial moves forward and enters into the outlet tunnel. The spent abrasivefrom blasting operation after passing through the perforated floor plates willget collected into the cabinets bottom storage hopper. From where it istransferred to the bucket elevator, which elevate the abrasivevertically and discharges the same into a media separation unit where dust andfine abrasives are cleaned ensuring that only clean abrasive will re-circulateto the blast wheel units for effective and better cleaning. A Dust collectionsystem is provided with the machine which will continuously remove the dust andfine particles, thus keeping the inside of the machineand the nearby environment dust & pollution free.

Product Description - Paper Mill & Steel Plant Price of product ( USD price or FOB price) - RS 60000.00

Product Description - Billet Cutting Price of product ( USD price or FOB price) - RS 350000.00