Wetting - Scouring - Stain Removing Agents

Ginger root Botanical name: Zingiber officinale Linn. Family: Zingiberaceae. Ginger oil and oleoresins are the volatile oil derived by steam distillation of ginger and oleoresin. It is obtained by percolating the powdered rhizomes of Ginger, Zingiber officinale with volatile solvents. Ginger contains 1-2 percent of volatile oil, 5-8 percent of pungent acrid oleoresin and starch. Zingiberene is the chief constituent in the oil of ginger. Oil is employed for flavoring all kinds of food products and confectionary and finds limited use in perfumery. Oleoresin, commercially called Gingerin contains pungent principles viz. gingerol and shogaol apart from the volatile oil of ginger and is used as an aromatic, carminative, stomachic and as a stimulant. Oleoresin from ginger is obtained conventionally by extraction of dried powdered ginger with organic solvents like ethyl acetate, ethanol or acetone. Commercial dried ginger yields 3.5-10.0 per cent oleoresin. Ginger oleoresin is a dark brown viscous liquid responsible for the flavour and pungency of the spice. Ginger of commerce or `Adrak` is the dried underground stem or rhizome of the plant, which constitutes one of the five most important major spices of India, standing third or fourth, competing with chillies, depending upon fluctuations in world market prices, world market demand and supply position. Ginger, like cinnamon, clove and pepper, is one of the most important and oldest spices. It consists of the prepared and sun dried rhizomes known in trade as `hands` and `races` which are either with the outer brownish cortical layers (coated or unscraped), or with outer peel or coating partially or completely removed. Ginger requires a warm and humid climate. It is cultivated from sea level to an altitude of 1500 meters, either under heavy rainfall conditions of 150 to 300 cm or under irrigation. The crop can thrive well in sandy or clayey loam or lateritic soils. The composition of dry ginger is given below: Dry Ginger rootMoisture:6.9 % Protein:8.6 % Fat:6.4 % Fiber:5.9 % Carbohydrates:66.5 % Ash:5.7 % Calcium:0.1 % Phosphorous:.15 % Iron:0.011 % Sodium:0.03 % Potassium:1.4 % Vitamin A:175 I.U./100 g Vitamin B1:0.05 mg/100 g Vitamin B2:0.13 mg/100 g Niacin:1.9 mg/100 g Vitamin C:12.0 mg/100 g Calorific value:380 calories/100 g. Ginger Oleoresin is obtained by extraction of powdered dried ginger with suitable solvents like alcohol, acetone etc. Unlike volatile oil, it contains both the volatile oil and the non-volatile pungent principles for which ginger is so highly esteemed. Concentration of the acetone extract under vacuum and on complete removal of even traces of the solvent used, yields the so called oleoresin of ginger. Ginger oleoresin is manufactured on a commercial scale in India and abroad and is in great demand by the various food industries.

Capsicum Oleoresin is prepared by extracting the crushed capsicum (Capsicum Annum Linn) with volatile solvents by percolation method. It contains the pungent principles, capsicin not less that 8 percent. It also contains the red colouring matter called Capsanthin. This product is a powerful irritant and a carminative, which is also used as a counter irritant in lumbago and neuralgia. It can also be used to treat stomach ache that involves poorly functioning stomach muscles and as an antibacterial agents. Extraction of oleoresin capsicum from peppers involves finely ground capsicum, from which capsaicin is extracted in an organic solvent such as ethanol. The solvent is then evaporated, and the remaining wax like resin is the oleoresin capsicum. An emulsifier such as propylene glycol is used to suspend the OC in water, and pressurized to make it aerosol in pepper spray. The high performance liquid chromatography (HPLC) method is used to measure the amount of capsaicin within pepper sprays. Scoville Heat Units (SHU) are used to measure the concentration or "heat" of pepper spray. A synthetic analogue of capsaicin, pelargonic acid vanillylamide (desmethyldihydrocapsaicin), is used in another version of pepper spray known as PAVA spray which is used in the United Kingdom. Another synthetic counterpart of pepper spray, pelargonic acid morpholide, was developed and is widely used in Russia. Its effectiveness compared to natural pepper spray is unclear. Pepper spray typically comes in canisters, which are often small enough to be carried or concealed in a pocket or purse. Pepper spray can also be bought concealed in items such as rings. There are also pepper spray projectiles available, which can be fired from a paintball gun. It has been used for years against demonstrators. Derived from chilli peppers, oleoresin capsicum is the active ingredient in pepper spray and in some topical pain relievers.

CURIA YG is a Vegan, Gluten-Free, Plant-based and Non-GMO starch used as curdling and thickening agent in Yogurt and Lassi. No addition of preservative and Mono sodium Glutamate in the starch. APPLICATIONS 1. First add 2% to 10% of CURIA- YG based on the Protein Content of the Milk in cold (40C to 360C) condition. Dissolve it well without Lump formation. 2. Heat the milk mixer to 850 c & hold it for 12 minutes with continuous stirring. 3. Cool the pasteurized milk to 43 0c to 45 0c with slow stirring and then add required quantity of Culture and stir it slowly for even mixing of culture. 4. Then keep it in an incubator @ 430c for 6 hours and transfer it to chiller. OR 1. Add 2% to 10% of CURIA- YG based on the Protein Content of the hot milk at 800C to 850C and stir continuously for 2 minutes without lump formation 2. Cool the milk to 43 0c to 45 0c with slow stirring and then add required quantity of Culture and stir it slowly for even mixing of culture. 3. Then keep it in an incubator @ 430c for 6 hours and transfer it to chiller. DOSAGE For excellent results, use 2 to 10% CURIA-YG of total batch size, based on the Protein Content of the Milk. For Lower Protein Content in the Milk higher Curia-YG NEED TO BE USED.

FryShine is a Physically Modified starch, Vegan, Gluten-Free, Plant-based, Non-GMO starch. It is produced by Physical modification of starch with functional food ingredients to enhance the textural properties and expansion of fryum related products. As starch based glazing agent: FryShineTM acts as starch based glazing agent in fryums and improves the appearance of the product. It gives improved shiny appearance to the product. It can be used for different types of fryums such as pipe fryum, wheel fryum, alphabet fryum, 3D pellet snacks. It can also be used for Pappad and appalam

CURIA YG (P33) is a special curdling and thickening agent for yogurt and lassi. It has no added preservative and Mono sodium Glutamate. FEATURES AND BENEFITS â?¢ 100% Natural. Protein and carbohydrate derivative. â?¢ Improves thickness. â?¢ Improves smooth texture. APPLICATIONS 1. First add 2% to 3 % of CURIA- YG(P33) to the milk in cold (40C to 360C) condition. Dissolve it well without Lump formation. 2. Heat the milk mixer to 850 c & hold it for 12 minutes with continuous stirring. 3. Cool the pasteurized milk to 43 0c to 45 0c with slow stirring and then add required quantity of Culture and stir it slowly for even mixing of culture. 4. Then keep it in an incubator @ 430 c for 6 hours and transfer it to chiller.

Chikmat Coating Agent Chikmat is a white to cream color fine fluffy powder. It is partially soluble in cold water. It helps to serve the dish tastier. Features: It adds extra taste while mixing with masala. It gives Mouth feel while eating. Acts as a less oil observant. Application: Coating agent in Non Vegetarian Dishes Coating agent in Vegetarian Dishes Hotels, fast foods and in Homes

Oxidized starch - TS is a Chemically Modified, Vegan, Gluten-Free, Plant-based, Non-GMO tapioca starch. Oxidized starch is characterized by its exceptional functional properties such as low viscosity, high stability, clarity, film forming, low temperature stability and binding properties. Oxidized starch is widely used in bakery products, frozen foods, dairy products, confectioneries, breading and coating applications, etc., It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG). FUNCTIONAL PROPERTIES Oxidized starch forms highly thixotropic pastes with stiff texture, which is related to its gelling capability Low gelatinization temperature and viscosity, clarity, and soft gel texture are attributes of oxidized starch used in breading and related applications When heated in water, Oxidized starch form clear fluid sols. On cooling, however, the sols made by cooking oxidized starch are more stable or resistant to thickening and forming gels or pastes Oxidized starch is used in formulated products. They also are used in starch batters and in breaded foods, where they improve adhesion of the batter to meat and fish Gum confections made with oxidized starch have longer shelf life, better gelling characteristics, increased clarity, better taste, and quicker drying Used in batters and breading for coating various food stuffs, in confectionery as binders and film formers, in dairy products as texturizers Oxidized starch is often used for coating, sealing, batter binding, emulsification, and dough conditioning in baking and other food products.

Las 3NF- Lactose Substitute Non- Fat Solid is an Enzymatically Modified, Vegan, Gluten-Free, Plant-based, Non-GMO starch used as a Texturizing agent, Taste Improver, Bulking Agent, Volumising, Emulsifier, Fat Replacer, Stabilizer & Thickener and in Milk and Milk products. It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG).

LAS 3 NF is popularly used in biscuits baking, milk cookies, cakes, muffins, cupcakes or pastries. They are effective spray-drying aids for cheese powders, coffee whiteners, flavours and other hard-to-dry products. It ensures even flavour distribution. The functional properties of LAS 3 NF we export are flavour enhancement, emulsification, gelling & heat setting, nutritional enrichment, solubility, water binding and viscosity building and whipping, foaming & aeration.