Front Pdc Harness

Front and Rear PDC sensor harness for most of the car brands. All made in Poland, very high quality.

Jining Debons Construction Machinery Co., Ltd. is located in Jining City, Shandong Province. Debons is specialized in KOMATSU track adjuster assembly, cylinder, yoke, final drive, swing machinery, pins and bushings, electronic parts,excavator bucket,,radiator operatorâ??s cabin , hydraulic parts and CATERPILLAR/HITACHI travel gear box , track adjuster assembly and so on... We are provding 7x 24 hours of technical support and equipment warranty. From the date of availability year, the equipment warranty period is 6 months after sale. After the warranty expires , we will provide technical support for life.Scientific management,great technique,advanced machine and perfect quality guarantee system ensure the high quality. We expect to cooperate with our friends all over the world and make a better future together.

Original /oem shroud 20y-03-31131 can be offered with competitive price . Jining debons construction machinery co., ltd. is located in jining city, shandong province. debons is specialized in komatsu track adjuster assembly, cylinder, yoke, final drive, swing machinery, pins and bushings, electronic parts, excavator bucket,, radiator operatorâ??s cabin, hydraulic parts and caterpillar/hitachi travel gear box, track adjuster assembly and so on.

Original /oem shroud 20y-03-31131 can be offered with competitive price . Jining debons construction machinery co., ltd. is located in jining city, shandong province. debons is specialized in komatsu track adjuster assembly, cylinder, yoke, final drive, swing machinery, pins and bushings, electronic parts, excavator bucket,, radiator operatorâ??s cabin, hydraulic parts and caterpillar/hitachi travel gear box, track adjuster assembly and so on.

Jining Debons Construction Machinery Co., Ltd. is located in Jining City, Shandong Province. Debons is specialized in KOMATSU track adjuster assembly, cylinder, yoke, final drive, swing machinery, pins and bushings, electronic parts,excavator bucket,,radiator operator�¢??s cabin , hydraulic parts and CATERPILLAR/HITACHI travel gear box , track adjuster assembly and so on... We are provding 7x 24 hours of technical support and equipment warranty. From the date of availability year, the equipment warranty period is 6 months after sale. After the warranty expires , we will provide technical support for life.Scientific management,great technique,advanced machine and perfect quality guarantee system ensure the high quality. We expect to cooperate with our friends all over the world and make a better future together.

Supplier: Construction parts 1) undercarriage spare parts: track shoe, track link, bolt, track roller, carrier roller,sprocket, front idler, idler cushion 2) engine spare parts: cylinder head, cylinder block, turbocharger, piston, piston ring, metal, crankshaft, oil pump, fuel injection pump, water pump, alternator,starting motor. 3) hydraulic spare parts: main valve, main pump, solenoid valve, boom/arm/bucket cylinder, final drive, travel motor, swing machinery, swing motor. 4) operator�¢??s cab spare parts: cab ass�¢??y, monitor, controller, engine controller, wiring harness, seat, air conditioner, air compressor. 5)final drive assembly, track adjuster, track gear box and swing gear box,swing circle..

Excellent quality 81NA-01021 R360LC-7 excavator slewing bearing used for excavator part Features of Slewing Bearings  Slewing bearing is also called:Slewing ring bearing/Turnable bearing/Slewing ring etc. Slewing Ring Bearings can accommodate axial, radial and moment loads acting single or incombination and in any direction.  They are not mounted in a housing or on a shaft, but directly to a seating surface.  The inner and outer ring are supplied with mounting holes. Both rings may have integral gears They are also referred to as slewing rings and tabletop bearings. Slewing ring bearing can perform oscillating (slewing) as well as rotating movements.  They may be used without gears or with internal or external ge Other Products : 1) Undercarriage spare parts:Track shoe,Track Link,Bolt,Track roller,Carrier Roller,Sprocket,Front Idler,Idler Cushion 2) Engine spare parts:Cylinder Head, Cylinder Block, Turbocharger, Piston, Piston Ring, Metal, Crankshaft, Oil Pump, Fuel injection Pump, Water Pump, Alternator, Starting Motor 3) Hydraulic spare parts: Main Valve, Main Pump, Solenoid Valve, Boom/Arm/Bucket Cylinder, Final Drive, Travel Motor, Swing Machinery, Swing Motor 4) Operator’s Cab spare parts:Cab Ass’y, Monitor, Controller, Engine Controller, Wiring Harness, Seat, Air Conditioner, Air Compressor  5)Cooling parts:Radiator,heat sink,air conditioner,compressor,after cooler,water cooler,hydraulic oil cooler etc.  6)Other parts:Service kit,swing circle,engine hood,swivel joint,fuel tank,filter,boom,arm,bucket ect.  Rexroth  A2F A2FO A7V A6VM series A4VSO45/71/125/180/250/500, A4V40/56/71, A4VG28/40/45/50/56/71/90/125/140/180/250, A10VSO16/18/28/45/63/71/85/100/140,  A10VG28/45/63,A10V63,A11VG50,A11V060/075/095/130/145/160/190/190/250,A11V260  kawasaki:  K3SP360,K5V80/140/160/200,K3V63DT/140DT/180DT/280,K3VG280,  NV64/84/111DT/137/172/270,NX15,NVK45,KVC925,KVC930,KVC932  M2X63/96/120/146/150/170/210,M5X130/150/173/180/500,MAG150/170  GM05VL/06VL/05VA/07VA,GM08/09/10/17/18/23/30H/35VA/35VL/38VB

ROCK REAMER There is no fixed tooth shape and bearing for the rock reamer, so it is necessary to select appropriate tooth shape and bearing structure according to different stratum structure. It adopts the palm back tilt, cold inlaid anti - ruin gold design, with the roller anti-peeling structure, mainly to prevent the roller falling off after the roller bearing is damaged, resulting in the accident in the hole. The roller reamer is suitable for horizontal directional drilling construction, with high design strength, good wear resistance, long service life and good safety performance. The reaming size is 220~1600mm. Types Of Rock Reamer Roller Cone Reamer It means that the teeth using the roller are milled teeth, that is, the teeth milled out on the matrix of the roller, whose wear resistance is relatively poor. In order to improve its wear resistance, it is often coated with a hard alloy layer. What Are Rock Reamer Made Of? 01 The Structure Of The Rock Reamer Is Shown In The Figure The rock reamer mostly uses the single tooth palm of the cone bit and the cone as one cutting edge, 02 With The Number Of Cutting Edges At Least 3 The cone reamer is composed of a rear centering plate, a rear baffle. 03 A Mandrel A front baffle, a front centering ring, a front centering plate, a cone, and a tooth palm. 04 The Reamer Uses Welding Process To Connect And Fix The Components. In the process of hole reaming, the screw drill provides torque and the drill provides tension. As a drill bit supplier, we will do our best to meet all the needs of customers. If you want to know more types of oem pdc bit, please visit our website.