At OMM Seals, We develop and design any kind of engineered elastomeric molded parts and component with our varied molding option including compression , injection molding, extruded or calendered. We manufacture custom-molded parts from Synthetic Rubber, Natural Rubber, Silicon, Viton, Fluorelostomeres, EPDM, Polyurethane, H-Nbr, Nitrile etc.
Cold Shot Nitrogen Deburring Machine Introduction Automatic deburring is a process for removing flash from molded rubber parts. We use liquid nitrogen, high - speed rotation and shot blasted plastic media in varying combinations to remove the flash in a highly precise, economical and expedient manner. Parts that have thin flash can be quickly and thoroughly cryogenically deflashed. This process is exceptionally good at removing the inner dimensional and complex flash that cannot be removed by any other method. Application O - rings, gaskets and other rubber sealings Insulators and other electric / electronic components Valve stems, washers and fittings Short tubes and flexible boots Rubber absorbers and bumpers for automobile Face masks & goggles Mobile phone housing and intelligent watch strap Zinc and mag alloys like door lockers for auto cars SPECIFICATIONS NS - 120C Size: L1400mm * W1300mm * H2300mm Weight: 1500kg Power Supply: AC380V 50HZ Electrical Capacity: 8KW * 3PH Design Temp: - 130Deg. C Design Pressure: 0.5 - 0.7 Mpa Outer Wall Material: SUS Frame Material: 100% SUS304 Barrel Capacity: 120L Wheel Speed: 6, 000 rpm Max Barrel Speed: 0 - 16rpm Media Throw wheel Size : 350 Operation Mode: Press Button
Plastic Auto Rubber Mud Guard Mould The mudguard is a plate structure installed behind the outer frame of the wheel. It is usually made of high-quality rubber material, but also engineering plastics. The mudguard is usually installed on a metal baffle behind the wheel of a bicycle or motor vehicle, a cowhide baffle, a plastic baffle, and a rubber baffle. The effect after installation is that the mudguard is about 5cm protruding from the body. This 5cm effectively prevents flying stones and gravel from damaging the paint surface of the body. Processing technology: The specific processing technology of the fixed core is: material preparation (the material is P20, pre-hardened) rough milling six sides grinding benchmarks punching and tapping CNC rough machining CNC finishing (precision is used at the peripheral corners of the fixed core Engraving) â??Fine milling benchmark diagonal â??Deburring â??Rough polishing â??Fine polishing. Absorb the lessons of the past, before the fixed mold core is subjected to CNC finishing, the workpiece should be subjected to stress relief treatment to prevent deformation and cracking of the workpiece. The specific processing technology of the movable core is: material preparation (the material is P20, pre-hardened) rough milling six sides grinding benchmarks drilling and tapping â?? CNC rough machining CNC finishing EDM wire cutting Finish milling reference diagonal deburring rough polishing fine polishing. The specific process of the core is: material preparation (the material is P20, pre-hardened) rough turning grinding reference and finishing turning fine milling (with mold). The processing technology of other parts can be carried out according to the conventional technology.
We customize plastic injection mold with standard mold base per customers' requirements. Mold base steel, cavity, runner can be customized.
Our company have more than 10 years experience within plastic manufacture , injection moulding, rubber , diecasting in china.With advanced CNC milling machine, electric discharge machining, wire-cutting machine, drilling machine, injection machine and skilled engineers. Depend on customers.
We are the leading manufacturers of Antivibration Machine Rubber Pads & Industrial Rubber Products and Parts
Product Content Description: OEM LSR mould making/LSR tool making 1. Purpose: for producing baby pacifier chain 2. Be suitable for: plastic mateiral 3. Mould working theory: plastic material melt in hot injection barrel, liquid plastic material from injection barrel go into cold plastic mould to mold solid plastic parts. Product Name: plastic baby pacifier chain mould Material: S136 for mould core, HRC48-52, #50 steel for mould base or based on clients' requests. Model: Medium Cavities: 1 cavity Mould structure : big injection gate Suggest Machine: 120T plastic injection molding machine Mould life: 100 0000 shots Mould delivery time: 35 working days
OEM LSR mould making/LSR tool making 1. Purpose: for medical use 2. Be suitable for: LSR machine and LSR mateiral 3. Mould working theory: two components LSR material A and B, mixed in the dynamic and static mixer as the proportion of 1:1:, then the mixed material go to injection barrel, then to injection nozzle, then to hot LSR mould (the mould temperature is between 90 degree to 180 degree), in the mould the mixed LSR material is cured and solidified to solid silicone parts. Product Name: liquid silicone negative pressure balloon mould Material: S136 for mould core, HRC48-52, #50 steel for mould base or based on clients' requests. Model: 100ml, 200ml, 400ml Cavities: 1, 2 and 4 cavities Mould structure: cold runner which can save lots of material Suggest Machine: 130T or 150T LSR injection molding machine Mould life: 100 0000 shots Mould delivery time: 35 working days
Supplier: 1) plastic injection molded parts
2) mould design and development
3) automotive plastic parts
4) auto electrical parts
5) industrial/automotive battery parts
6) plastic household products
7) gear moulding
8) over moulding
9) insert moulding
Buyer: 1) copper plated/tin plated terminals for auto electrical parts.
Supplier: PVC rubber moulds
