Electronic Rotary Latches

Using a rotary design, this automotive wire harness tape wrapping machine can wind different wire harnesses to achieve various winding modes, including spot winding, full winding, and pattern winding. It features high speed, reliable movement, and eliminates the drawbacks of unstable braking, easy wear and tear, and high noise levels found in older machines. This machine is suitable for industries that require peripheral tape winding for wire harnesses, such as automobiles, motorcycles, and electronic wires. Operating mode: Touch screen, foot switch Working mode: Full winding, point winding, multi-segment winding, fixed-point winding Power supply:AC210V-AC240V Air pressure: 4P Winding length: Unlimited Winding combination wire diameter:3mm-40mm Tape specifications: Inner diameter 38mm, outer diameter

High speed extrusion lines Features: The extrusion machine is designed for producing pp/hdpe flat yarn. Maximum pp melting output. Capacity is 150350 kg.Hr, and the unit is equipped with a tube filter and rotary blade slitting system. The machine has less down time and prevents production loss. The pressure rollers of the take-off unit are pneumatically controlled, and have synchronized control electronic system. European screw, gearbox, static mixer, auto screen filter changer and human machinery interface fibrillator are available to meet special requirements Tensile strength 4.5kg-5kg per 1.000 denier Special request 6.5kg per 1.000 denier Flat yarn denier : 700-1.500 denier Special request : 1.000-6.000 denier Stretching ratio : 3-9 times Quenching system : water bath or chill roll

High speed extrusion lines Features : the extrusion machine is designed for producing pp/hdpe flat yarn. Maximum pp melting output. Capacity is 150-350 kg.Hr, and the unit is equipped with a tube filter and rotary blade slitting system. The machine has less down time and prevents production loss. The pressure rollers of the take-off unit are pneumatically controlled, and have synchronized control electronic system. European screw, gearbox, static mixer, auto screen filter changer and human machinery interface fibrillator are available to meet special requirements Tensile strength 4.5kg-5kg per 1.000 denier Special request 6.5kg per 1.000 denier Flat yarn denier : 700-1.500 denier Special request : 1.000-6.000 denier Stretching ratio : 3-9 times Quenching system : water bath or chill roll

FEATURES: The extrusion machine is designed for producing PP/HDPE flat yarn. Maximum PP melting output. Capacity is 100-150&200-300 kg.hr, and the unit is equipped with a tube filter and rotary blade slitting system. The machine has less down time and prevents production loss. The pressure rollers of the take-off unit are pneumatically controlled, and have synchronized control electronic system. European screw, gearbox, static mixer, auto screen filter changer and human machinery interface fibrillator are available to meet special requirements. Tensile strength 4.5kg-5kg per 1.000 Denier Special request 6.5kg per 1.000 Denier Flat yarn denier : 700-1.500 Denier Special request : 1.000-6.000 Denier Stretching Ratio : 3-9 Times Quenching system : water bath or chill roll

High speed extrusion lines Features: The extrusion machine is designed for producing pp/hdpe flat yarn. Maximum pp melting output. Capacity is 150~350 kg.Hr, and the unit is equipped with a tube filter and rotary blade slitting system. The machine has less down time and prevents production loss. The pressure rollers of the take-off unit are pneumatically controlled, and have synchronized control electronic system. European screw, gearbox, static mixer, auto screen filter changer and human machinery interface fibrillator are available to meet special requirements Tensile strength 4.5kg-5kg per 1.000 denier Special request 6.5kg per 1.000 denier Flat yarn denier : 700-1.500 denier Special request : 1.000-6.000 denier Stretching ratio : 3-9 times Quenching system : water bath or chill roll

0.3-4.0mm Wire Rotating Spring Forming Machine 1. US-520R transfer spring forming machine adopts computer control system from Taiwan and servo motor imported from Japan, with convenient and fast operation, high speed, and high precision 2. It is divided into camshaft, feed spool, transfer spool, rotary spindle, take-up (optional accessories), five-axis synchronous operation 3. There are eight groups of sliders in the cam section, crank arm and cam rotation axis. The cam plate is fixed on the rotating shaft and can be screwed forward and backward, and used to push the movement of the slider. There are three ways of mechanical action: extrusion, stamping and forming 4. The feeding line system is installed behind the machine horizontally. There are 2 sets of feeding bobbins, each of which is a pair of feeding reels. US-520R reeling machine requires only one pair of feeding reels with 1.0 thread diameter and 1.0 or more available On the delivery line. Computer control wire length, the minimum wire feed unit is 0.01mm. Features: wear, minimal noise, high accuracy with the camshaft, rotating shaft. 5. The rotary shaft can control the rotation of the wire, and it is more simple and quick to realize the high-risk special-shaped spring adjusting machine speed. 6. The rotating mandrel can rotate forward and backward, and the curling device is installed on the slide, which can achieve multi-rotation positive/negative rotation 7. The position of each axis, the length of the feeding line, the production speed and the production quantity are all displayed on the screen. Editing and modifying program data, debugging is very convenient and quick 8. US-520R machine can produce all kinds of tension spring, pressure spring, tower spring, double torsion spring, flat spring and other opposite springs. Can be used in lighting, electronics, toys, home appliances, sports equipment, automotive and other industries need precision springs.

1. US-520R transfer spring forming machine adopts computer control system from Taiwan and servo motor imported from Japan, with convenient and fast operation, high speed, and high precision 2. It is divided into camshaft, feed spool, transfer spool, rotary spindle, take-up (optional accessories), five-axis synchronous operation 3. There are eight groups of sliders in the cam section, crank arm and cam rotation axis. The cam plate is fixed on the rotating shaft and can be screwed forward and backward, and used to push the movement of the slider. There are three ways of mechanical action: extrusion, stamping and forming 4. The feeding line system is installed behind the machine horizontally. There are 2 sets of feeding bobbins, each of which is a pair of feeding reels. US-520R reeling machine requires only one pair of feeding reels with 1.0 thread diameter and 1.0 or more available On the delivery line. Computer control wire length, the minimum wire feed unit is 0.01mm. Features: wear, minimal noise, high accuracy with the camshaft, rotating shaft. 5. The rotary shaft can control the rotation of the wire, and it is more simple and quick to realize the high-risk special-shaped spring adjusting machine speed. 6. The rotating mandrel can rotate forward and backward, and the curling device is installed on the slide, which can achieve multi-rotation positive/negative rotation 7. The position of each axis, the length of the feeding line, the production speed and the production quantity are all displayed on the screen. Editing and modifying program data, debugging is very convenient and quick 8. US-520R machine can produce all kinds of tension spring, pressure spring, tower spring, double torsion spring, flat spring and other opposite springs. Can be used in lighting, electronics, toys, home appliances, sports equipment, automotive and other industries need precision springs.

DESCRIPTION The SZ-48P-5A 5-Axis Series CNC machine is a mid-sized CNC for machining wood, composites, plastics and non-ferrous metals. The SZ-48P5A is built on a massive steel frame with fixed gantry, moving table design to ensure maximum rigidity at the cutting tip. The structure of the machine allows for high speed simultaneous 5 axis machining and is has a machining area of 3100 x 1850 x 950mm. The SZ-48P5A comes as standard with a powerful 10kw HSD spindle and 8 position rotary ATC as standard. High speed machining and smooth motion are achieved using a state of the art OSAI NC control system. APPLICATIONS The SZ-48P5A is a state of the art 5-Axis machining centre with full 5 axis interpolation. Designed with mould manufacture in mind the SZ-48P5A is an extremely rugged machine with an extra heavy duty gantry and machine table for maximum rigidity and strength to provide high speed machining in all 5 axes. Equipped with a state of the art Osai digital closed loop NC control system the machine is capable of machining at speeds up to 20m/min. The SZ-48P5A 5 Axis comes as standard with a 10kw HSD spindle and HSK 63F tool clamping for extra precision. The rotary ATC with 8 positions tool carousel can complete tool changes in under 8 seconds, making it a true high speed machining centre for the mould, wood, plastic and composite industries. The standard table size of 1220 x 2440mm allows machining of large parts in full 5 axis. The open design of the machine adds greater flexibility as larger parts can be indexed and passed under the gantry for infinite length machining. Due to the flexibility of the MAXI-M9 it is commonly used for mould making, machining moulds in wood, resin tooling board, EPS and composites, trimming of vacuum formed mouldings, plastic fabrication, GRP machining, props and model making, profiling, solid surface machining and contouring. STANDARD CONFIGURATION Travelling area: 1850 x 3100 x 950mm Extra heavy duty welded steel frame and gantry for maximum straightness and rigidity 12Kw HSD Spindle 8 position rotary ATC with HSK63F precision tool clamping THK lubricated for life linear rails and guide blocks Yaskawa servo drivers and motors for high power and speed Osai PC interfaced Numerical Control System Automatic machine lubrication system T-Slot clamping table MPG XYZ Hand Wheel for easy origin and work piece setting. Tool setting device One starter set woodworking tools 3 x collets, choice from 1-20mm (imperial available if preferred) Delta Inverter 0-22000rpm control Schneider Electronic Spare Parts Japanese OMRON limit switch SEAZEA double sheathed, fire retardant and highly flexible towline cable can be bent 300,000 times Igus cable chain carrying system Electronic safety mat, protection net around the machine Voltage: 3PH 415V 50HZ OPTIONS Oil Mist cooling system for cutting non-ferrous metals T-slot/vacuum combination table with Becker vacuum pump Extra tool holders

Slant Bed CNC Lathe Machine CNC Lathe Machine Product features: Highest accuracy Taiwan linear guide ways Higher speed spindle unit ,optional homemade spindle Higher rigidity cast iron Integrated automatic lubrication One-piece casting slant bed cnc lathe  More information you can views here Application: The CNC Lathe Machine is suitable for automobile, motorcycle, electronics, aerospace, military, oil and other industries, for rotary parts of conical surface, circular arc surface, surface and various inch screw thread batch, efficient, high precision automatic processing, with 45 degrees high rigidity of the whole bed, large torque spindle by Taiwan rail line, ensure that the machine is high rigidity, spindle near the center of the manipulator, the workpiece loading and unloading more convenient.   Product main technical specifications:   Specification Units TCK46A Max.swing over bed mm 460 Max.swing over cross slide mm 170 Max.turning length mm 350 Spindle unit mm Ã?170 Spindle nose(optinal chuck) A2-5/A2-6 Spindle motor power kw 5.5 Max.spindle speed rpm 3500 Spindle bore mm Ã?56 X/Y axis lead screw specification 3210/3210 X axis limit Travel mm 240 Z axis limit Travel mm 400 X axis motor torque N.m 7.5 Z axis motor torque N.m 7.5 X/Z axis repeatability mm 0.003 Tails tock bore mm 65 Tails tock quill travel mm 80 Tail stock travel mm 200 Tail stock taper MT4 The bed form and inclination ° One -piece casting/30°