We offer all types of FFP3 face masks. Our FFP3 filtering half masks are manufactured in accordance with regulation (EU) 2016/425 of the European Parliament and of the council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC and EN 149:2001+A1:2009 Respiratory protective devices Filtering half masks to protect against particles Requirements, testing, marking. The masks are non-reusable particle filtering half masks and intended exclusively for personal protection. FFP3 cup type filtering half masks are designed and produced to protect against both solid and liquid aerosols, which can be only used in the general working environment. The mask cannot be used under the following environment(s): - Do not use inflammable or explosive environment; - Do not use for respiratory protection against atmospheric contaminants/concentrations which are unknown or immediately dangerous to life and health.
FFP3 with valve, CE certificate issued by NB company
We supply and source masks like N95 / FFP3 / FFP3 with Valve / FFP2 Masks. As there are literally many different medical standards for each variation of these masks, the price will Vary based on your medical requirements and quantity.
General Features Size Universal Colour White Packaging 20 masks per box Optional design Cupped or folded Optional feature Valved or nonvalved Safety Features CEcertified FDAcleared In accordance with the European standard EN 1492001A12009 Filtration efficacy of PM25 99 Filtration efficacy of PM03 99 Disposable Inward leakage lt2 Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic headbands for a more secure maskadjustment High fit effectiveness Less moisture and heat buildup valved respirators More lightweight and easier to carry nonvalved respirators Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against variousnonoily airborne contaminants It is extremely effective 99 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA EN 1492001A12009 Our FFP3 respirators have been confirmed to meet all of the performance requirements set by the European Standard EN 1492001A12009 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your FFP3 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Decide for yourself Vannin Healthcare Global is one of the rare suppliers who let you choose your FFP3 masks design at no additional cost If youre indifferent about the design of your respirator or just want to surprise your future self feel free to skip this step Choose the design Cupped or Folded Moulded or cupped masks were made with your physiognomy in mind They were designed to better fit your face firmly preventing leakage However they might be impractical if you want to carry them in your pocket Remember if your mask gets damaged its best to just throw it away Folded masks on the other hand you can easily carry around in your pocket or your purse Convenient as they are they might be the right choice to have on you at all times Just store them in a clean plastic bag and youre good to go But be careful to put them on tightly and not leave any gaps between your face and the mask I want the folded FFP3 respirator mask The purpose of the valve on respiratory protective masks is to lessen the breathing resistance which is higher compared to other nonrespirator masksfor safety reasons The wearing of your respiratory protective mask becomes more comfortable as there is less moisture buildup However if you suspect you have been infected wearing an unvalved respirator is advised Otherwise you risk exposing other people to virus particles I want the nonvalved FFP3 respirator mask Nonvalved FFP3 masks offer a twoway protection Our respirator masks will be effective whether your goal is to avoid inhaling the virions or avoid spreading the virus to people close to you A mask without a valve is also less bulky being a more lightweight solution I want the nonvalved FFP3 respirator mask Before entering a possibly contaminated area you need to properly put on your filtering face piece To do this you need to Take the mask in one hand so that the nose clip is turned upwards Place the bottom of the mask against your chin while using your other hand to pull both straps over your head The bottom strap should go below your ears over your neck The top strap should go high on your head above the ears Adjust the mask carefully against your face not allowing for any gaps between the mask and your face Adjust the nose clip with both handsto ensure the nose clip is firmly tightened Pinching it with just one hand is not advised as it might affect the tightness of the mask Finally check if you completed all of the steps correctly by putting both of your hands over the mask so as to not affect its position and then quickly exhale Depending on where you fill the air passing adjust the nose clip or the entire mask accordingly following the aforementioned steps If there are no gaps for the air to pass through you have correctly put on the mask
Disposable half mask respirators Design and Performance: Mask covers the nose and mouth and the chin and may have inhalation and/or exhalation valve(s). The mask consists entirely or substantially of filter material. 2 elastic straps that go around the head and neck Individually packaged protected contamination before use. PPE Regulation (EU) 2016/425
Specification - 1/bag 10/box Price - See Note Remarks - With CE, FDA certification, SGS and other test reports, the FOB price is 0.65 US dollars. If the order quantity is large, the price can be a little more preferential,With the U.S. and Chinese Commerce Department whitelist,The production capacity of cup masks is relatively low, so the price is a little bit higher
High quality FFP3 respirator with valve, cup shape. This product has the best EU certification and quality and meets the highest EU standards EN 149:2001 + A1:2009. CE CERTIFIED: This mask has been tested to the European FFP3 standard, evaluated and approved by an EU notified body 0370. CE marked with the EU Declaration of Conformity. In conformity with PPE Regulation (EU) 2016/425. DESIGN:The adjustability 4-point headband design make it easily adapted to most face shapes, the required tightness can also be ensured. The design of the air valve makes the breathing smoother, especially when used for a long time. Glasses friendly. Filtration efficiency 99,9% Stock in Slovakia.
Ffp3 Protectin Mask FDA and CE Certified
Product name : FFP3 Respirator mask (with Valve) Product specification : FFP3 Respirator mask With Valve Price on request Origin : China Certification : CE Production capacity : 5 million per week MOQ : 100,000 Pcs
