Serpentine coil thermic fluid heater capacity 1000000 kcal to 12000000 kcal
Coil type 4 pass thermic fluid heater capacity 400000 kcal to 8000000 kcal and 350 deg C temp
As Per Client Requirement Of Vessel Design Requirement. We Can Carry Detailed Design And Fabrication As Per Requirement. With Heating, Cooling /heating Cooling Coils For Thermic Fluid /steam /electric, Agitators For Mixing, Safety Devices Like Pressure Relief Valves/measurement, Instrumentation For Measurement/ Structure Design., Etc. Also Can Be Supplied As A Complete Skid Kettles -non Pressursed Vessel Moc : Cs /cs Epoxy Lined / Ss / Alloy Steel.
Description High-grade barium sulfate specially processed use as a drilling fluid weighting additive. BARITE meets the API Specification 13A, Section 2 requirement for a drilling fluid BARITE Recommended Use Primarily for mud rotary drilling, barite increases mud density while maintaining low solids to help control formation pressures Advantages 1. High specific gravity; raises drilling fluid density with minimum solids 2. Controls formation pressure, stabilizes the borehole 3. Cost-effective, non-toxic, and chemically inert Properties 4. Specific Gravity: 4.2 (minimum) 5. Moisture Content: Less than 1% 6. Bulk Density: 150 lbs/ft3 7. Mineral Content: 94% barium sulfate Mixing and application Add BARITE through high shear mixer or jet hopper so that entire circulating volume is at uniform weight. To control artesian flow at surface, keep the hole full at all times with weighted mud. Starting with 100 gallons of mud at a weight of 9 lbs/gal, 134 lbs of BARITE will raise the weight to 10 lbs/gal and increase the volume to 104 gallons. Packaging 1500 kgs Jumbo bags, one bag per pallet. All are of F.I.B.C. Class, SINGLE TRIP, all weather ( 04 PF Inner Bag & 05 PP Outer Bag )
Thermic fluid circulation pumps
Thermic fluid steam generator capacity upto 10 tph and 65 kgs pressure
Thermic fluid heater erection work
This machine is used on plastic single-coils for loose leaf such as notebook binding. Before changing the size of inner diameter, it only needs to change the mold Of the forming machine. This machine can also automatically cut. Specifications: Supply voltage: 380v/50hz Working speed: you can change frequency to adjust speed at will. Power: main unit 5.5kw Production efficiency: 3000 circle per hour Weight: 240kg
Composition- Mixture of Synthetic Fluid (100%) Appearance- Silicon Green Liquid Kinematic Viscocity @ 40 C- 20 cSt. Flash Point (ASTM D-92)- 205° C / 401° F Max Bulk Temperature 320° C / 608° F Pour Point -40° C / -40° F Boiling Point 361° C / 682° F Total Acid No. 0.01 mg KOH/g Moisture Content
